Question about Vivitek D530 Projector

Open Question

Vivitek D530 power light flashes 6 times, then Red lamp light

At power up, lamp comes on briefly, then shuts down, blue power lamp button flashes six times, then flashes the red lamp light once, and repeats...tried the hard reset, unplugging and holding the power button - no help there. Any assistance is appreciated!

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
m_peel
  • 76 Answers

SOURCE: Hi, i have recently replaced my projector lamp, as

It could be the lamp life needs resetting or the filter life needs resetting. Hopefully so, otherwise it could be a faulty lamp module.

Good luck

Posted on Aug 05, 2011

Ad
gopakumarg43
  • 74243 Answers

SOURCE: Upside down picture on Vivitek D530

Hello
Check the Projection setting on the Installation I menu of the OSD

Posted on Feb 12, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Red light flashes 3 times


hold in on the power button for 10 sec make sure you put the cover on it good first if that dont work unplug it for a few sec then try to hold the power button down for 5- 10 sec that should work

Jan 06, 2013 | Sony Grand WEGA KDF-55WF655 36" Rear...

1 Answer

Power light is flashing 3 times consecutively. When hitting the power button the fan comes on then shuts back down..then starts flashing the red light again..I've recently bought a new lamp and installed...


Put lamp cover back in its place as 3 times blinking light shows lamp cover has not been fixed.
Lamp cover is first thing that you removed to replace lamp in tv, make sure it is fixed securely in its position.

Aug 13, 2010 | Sony KDF-50E2000 50" HDTV

1 Answer

Need help w/ HDTV


Have you ever replaced the lamp in the TV? Usually the owners manual will tell you what the flashing indicators mean on the front. The lamp would be my first suspect.

Nov 12, 2009 | Televison & Video

1 Answer

No picture, no sound, power button blinks 47 times, then lamp flashes 134 times, then shuts off


It is symptom of weak Lamp in your TV, replace Lamp with following part number..
A1606034B LAMP BLOCK XL-2100U
It is available in Sony Accessories for $200
Always buy Sony Original Lamp for your Sony TV and avoid aftermarket/ cheap lamps.

Apr 22, 2009 | Televison & Video

1 Answer

Heard a pop and screen went blank - won't come back on.


Your Lcd Projector Lamp/DLP Television Lamp went out

its about $165-$200 to replace if not under warranty


Nov 28, 2008 | Hitachi Televison & Video

2 Answers

Tv turns off tne comes back on


Hi,
Please count red light flash again.

5 times flash shows Lamp Error.
6 times flash shows No "DD 6V " output (G1 board) Its bit technical term.

Need fuhrer help, please Post it here.
Thank you.

Sep 21, 2008 | Sony Grand WEGA KDF-50WE655 50" Rear...

5 Answers

Vivitek tv


I have a 56" model that I have had a similar problem. My bulb burned out in <90 days. Warranty was 90 days on the bulb itself. When the TV picture goes out, the indicator LEDS blink on and off.

Here is what you have to determine:

1) First cover the left LED with a piece of paper so that you can't see it blinking. I don't know if your layout is the same as my TV. You may have to switch the paper blocking the LED.

2) Pay attention to the other LED and READ its' flashing code. In my case, the code was 2-3. It would flash 2 times, pause briefly, then flash 3 times. This meant code 23. That indicated the bulb was burned out.

3) If you look in the manual, It does have a code list of some sorts to tell you of the codes and their meanings. Hope this helps.

Nov 20, 2007 | Vivitek V37835 46 in. LCD Television

Not finding what you are looking for?
Vivitek D530 Projector Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vivitek Office Equipment & Supplies Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

The Knight
The Knight

Level 3 Expert

74243 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

Are you a Vivitek Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...