Question about Dewalt DC618K - 18V, 16 Gauge, 20 Degree Finish Nailer, 1-1/4" To 2 1/2" Capa
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
if the nailer is for 18 guage nail use 18 gauge nail if not 16 guage will jam. if it is not the problem is the profile return asyy may jam in side.
Posted on Sep 19, 2008
SOURCE: dewalt dc618 wont drive a nail
problem solved.whoever had used the tool must have hit something hard because the drive pin had been pushed back just enough to stop it from cycling.
Posted on Dec 04, 2008
SOURCE: nail gun wont fire
First - the air pressure has to be high enough - check the regulator on the tank to make sure it is delivering in excess of 60-70 psi (which I am sure you have already done).
If you have dry fired these guns (i.e. shot them off with no nails in them while you were lubricating them maybe) the mechanism inside could be damaged. I had that happen to one of my nailers (same brand). That was when I learned not to dry fire them...
Since both of them are not working though I would be more inclined to look at the air supply first.
Posted on Sep 10, 2009
Tips for a great answer:
Dec 07, 2013 | Dewalt Air Tools & Compressors
Nov 20, 2012 | Dewalt Cordless Finish Nailer Kit
Sep 26, 2012 | Dewalt Tools & Hardware - Others
Oct 09, 2010 | Dewalt Heavy - Duty 18 Gauge 2" Brad...
Sep 25, 2009 | Dewalt DC616kn 18 - volt 16 - gauge...
Apr 08, 2009 | Dewalt DC618KA Angled Nailer Kit
Nov 18, 2008 | Dewalt DC616kn 18 - volt 16 - gauge...
28 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: