Question about Olympus Oep-3 Color Video Printer

Open Question

OEP 3 Olympus color video printer

Unable to print picture. Mechanical Trouble Eject Paper

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1739 Answers

SOURCE: Hi, I'm a Biomed tech that

I don't think you will find this information widely available. Suggest you try signing up for OlympusConnect.com web portal, you will then be able to access product manuals and access technical assistance:

https://www.olympusconnect.com/es_UserRegistration.asp?intCmp=msg_supportnav_olympusconnect

Trust this is helpul.

Posted on Dec 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Unable to print.49


Hi,

The error indicates that there is a mechanical problem. Open the printer and look inside for any staples, paper clips, torn pieces of paper, etc.

Hope this helps. Please rate this solution
Randy

Oct 10, 2012 | Brother Sealed Mfc-j430w Wireless Printer...

1 Answer

Cant print anymore print counting is almost full. how to reset count


try this

Manual reset methods several EPSON Stylus Color. Actually there are two methods to reset epson printers counter, that is using software resetter such as adjustment program or SSC service utility or using manual by combination pressing button on the printer. If Reset using software resetter you can follow the way of usage the software but sometimes software resetter for the printer is not available. The only way to reset the printer if software resetter not available you can use manual reset.
The Following manual reset for some EPSON Stylus Color Printers:
1. EPSON Stylus Color
Pressing and holding ALT+FONT+LOAD+PAUSE buttons combination
press POWER button
Release all buttons
2. EPSON Stylus Color 300
3. EPSON Stylus Color 400, 600
Pressing and holding LOAD/EJECT and CLEANING buttons
press POWER button and hold it until you will see blinking INK OUT and PAPER OUT leds
Release all buttons
In 2-3 seconds time press LOAD/EJECT and CLEANING buttons again.
4. EPSON Stylus Color 440, 640, 740, 460, 660, 670, 760, 860, 880, 1160
Pressing and holding LOAD/EJECT and CLEANING buttons
press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds.
Release all buttons.
In 2-3 seconds time press and hold CLEANING button, until all leds will blink.
5. EPSON Stylus Color 680
Pressing and holding LOAD/EJECT and CLEANING buttons,
press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds.
Release all buttons.
In 2-3 seconds time press and hold LOAD/EJECT button, until all leds will blink.
6. EPSON Stylus Photo 785, 895
Pressing and holding Maintenance and Roll Paper buttons
press POWER button, You will see blinking Error led.
Release all buttons.
In 2-3 seconds time until led is blinking press and hold for 10-12 seconds Roll Paper button, until all leds will blink.
7. EPSON Stylus Photo 890, 1280, 1290
Pressing and holding Maintenance and Roll Paper buttons, press POWER button, You will see blinking Power led
Release all buttons
In 2-3 seconds time until led is blinking press and hold for 10-12 seconds Roll Paper button, until all leds will blink
In 2-3 seconds time press LOAD/EJECT and CLEANING buttons again.
8. EPSON Stylus Color 800, 850
Pressing and holding LOAD, CLEANING Color and CLEANING Black buttons
press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds.
Release all buttons.
In 2-3 seconds time press and release CLEANING Color button, You will see leds blinking.
9. EPSON Stylus Color 900, 980
Pressing and holding LOAD/EJECT and CLEANING buttons
press POWER button, You will see blinking INK OUT led
Release all buttons
In 2-3 seconds time press and hold CLEANING button for 10-12 seconds.
10. EPSON Stylus Color 3000
Pressing and holding PAUSE, LF/FF and DOWN ARROW buttons
turn on printer.
Release all buttons.

Mar 17, 2011 | Computers & Internet

1 Answer

Reading no paper paper tray is full


Instructions
  1. Check the display for an error message. If the display reads "Clearing paper from printer," the engine has detected a jam and is attempting to eject the jammed pages automatically. These pages will often be blank.
  2. Check the display for "Performing PRINT/STOP TEST" or "Performing SERVICE TEST." Either of these messages indicates that the printer is going through a test procedure that may eject blank pages.
  3. Reduce the amount of paper in the input tray if the printer is feeding multiple blank sheets at a time. The printer will pull extra pages through if the input tray is overfilled.
  4. Replace the paper in the input tray with the correct size if needed. If the 4600 printer detects the paper as an incorrect size for the print job, it may eject the paper without printing anything on it.
  5. Replace the ink cartridges if certain colors are blank on the page. Replace the black cartridge if printing a black text document that is coming out blank. The printer may attempt to print even if the ink level is low or empty, but will unable to print anything on the page, causing it to come out blank.
  6. Remove the sealing tape from newly installed cartridges. The tape covers the print heads and should be removed before installing the cartridges. If the tape is left on, it will prevent ink from getting on the pages as they print.
  7. Press the "Check mark" button on the control panel to enter the printer menu. Run a diagnostic so the printer can attempt to determine the cause of the blank pages printing. Press the up or down arrow to select "Diagnostics." Press the "Check mark" button. Press the "Down" arrow to highlight "PQ Troubleshooting." Press the "Check mark" button. The printer runs a diagnostic and returns to a ready state when done.

Jan 08, 2011 | HP LaserJet 4600 Printer

1 Answer

Power butten and ink and paper lights keep blinking when i try ti use it


This error means that some mechanical parts of your printer is in trouble. This could be some of the causes:

1. The print head is stuck somewhere or is unable to move because of some blockage in the printer's bay.
2. If you are using a Continuous Ink System, then the tubes might have blocked the print heads from moving.

To resolve, turn OFF your printer. Remove such blockage then turn the printer back ON.

Regards,
JR

Nov 04, 2010 | HP Office Equipment & Supplies

1 Answer

Dear all here i am anil kumar from india i have MFC brother printer DCP-195C but i have facing problem when i print the page the printer show print unable error 70 please solve my problem thanks...


Error 70 normally is a paper jam or something else that is stopping your print head moving correctly.

Open the covers, have a look, and after clearing the jam you must power off and on the machine.

- Dirty encoder strip

- Foreign object, such as a paper clip or ripped piece of paper is stuck in the machine

- Mechanical malfunction


The most common cause of this issue is dirt on the encoder strip.

Oct 27, 2010 | Brother DCP 165C Compact Color Inkjet...

1 Answer

My Canon MP210 never prints photos correctly! The colors come out like the right color but very incorrectly. Basically, the photos all have very severe color management problems. APparently the printer has...


Have you heard of Wysywig? What you see is what you get?

Well on color pictures on you monitor you get wysinwyg what you see is not what you get. Monitors are backlit, so colors are much more vibrant than what a printer can generally deliver. Explore the printing properties of your priinter as there are adjustments that can be made to enable better quality and true to color prints. The paper you use to print out your pics is also important in producing color that is close to original.

When you view your pics on screen try adjusting the color hue to the point it becomes overcolored and try a few experimental prints to see what level of the slide is needed to be used to achieve a brighter more vibrant picture. I would also like to say that the Canon 210 , whilst it is a very good printer, is at the cheaper end of the photo printer scale.

Talk to your ink and paper supplier, they can often show you or recommmend printers that are much higher and more accurate in delivering brighter and true to color photos.

Please rate my help++++Thanks for using FIXYA

Aug 04, 2010 | Canon PIXMA MP210 Photo All-In-One Printer

1 Answer

Unable to init.


If there is no jam it is generally a mechanical issue such as...

1. The planetary arm assembly not engaged correctly
2. Ink cartridge/purge switch harness not connected correctly
3. Purge cam switch broken
4. Gear(s) on maintenance unit broken
5. Paper feed motor broken
6. Main PCB defective

I find that if there was a paper jam, and the user pulled the paper out, option 4 is most likely. It is the smallest of cracks but ruins everything!

You will need to contact your local ASC for repair, find it here.
Thank you for using FixYa! – Don’t forget to rate our service.

Dec 20, 2009 | Brother MFC-5840CN All-In-One InkJet...

1 Answer

My printer is only printing half the picture, one half comes out great and the other half has nothing


  1. Remove the power cable from the printer.
  2. Remove the paper tray from the printer.
  3. Remove the paper from the paper tray.


  4. Verify that the paper you're using has KODAK XTRALIFE Paper
  5. Insert the paper tray into the printer.
  6. Open the color cartridge door, then remove the color cartridge.
  7. If the color cartridge ribbon is torn or damaged, replace it with a new cartridge.
  8. Install the color cartridge, and verify that it is fully engaged.
  9. Close the color cartridge door.
  10. Connect the power cable to the printer.
  11. Wait for the printer to initialize (the paper may eject automatically).

    NOTE: For the Photo Printer 500 and the G600 or G610 Printer Docks only, press the power button in addition to plugging in the power cable.
The printer's lights turn on. And after a few seconds, most or all of the printer's lights turn off. The printer will make noises while cycling. If a paper is stuck in the printer, while the printer is making the noises, pull gently on the paper to try and remove it.

If the problem persists cal 1800 2356325 > for a repair

Oct 26, 2009 | Kodak EASYSHARE CD33 & Printer Dock Series...

1 Answer

My printer is only printing half the picture, what should I do?


Here are the steps:

1.Remove the power cable from the printer.
2.Remove the paper tray from the printer.

3.Verify that the paper you're using has KODAK XTRALIFE Paper
4. Insert the paper tray into the printer.
5. Open the color cartridge door, then remove the color cartridge.
6.Install the color cartridge, and verify that it is fully engaged.
7.Close the color cartridge door.
8.Connect the power cable to the printer.
Wait for the printer to initialize (the paper may eject automatically).

If issue persist, call 1.800.235.6325 for repair.

Sep 24, 2009 | Kodak EASYSHARE Plus Series 3 Thermal...

3 Answers

Have the same problem


This has nothing to do with printer drivers or O/S. It means the print head is not travelling correctly. Did this happen after a paper jam? If so see my previous post:

Check that there is no paper jammed up on each side of where the print head travels.
Easiest way to do this is to power off/on. While the machine is going through its initial startup listen for when the print head travels along its carriage (from right to left). When you hear it, immediately switch off the power.
Open the main body of the printer and hopefully the print head will be stopped midway, you can then check at each end for any jammed paper.
If this does not solve issue, it will require an engineer.


If you are in the UK, call Brother UK tech support on 0870 830 4000. They will arrange a warranty repair, or pass you on to a repair agent if the machine is out of warranty.

Jun 17, 2009 | Brother MFC-5890cn Color Flatbed...

Not finding what you are looking for?
Olympus Oep-3 Color Video Printer Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Olympus Science & Laboratory Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Brad Brown

Level 3 Expert

15441 Answers

kakima

Level 3 Expert

102366 Answers

Are you an Olympus Science and Laboratory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...