Question about Ovens

Open Question

Diplomat elite oven clock setting - Ovens

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 37 Answers

SOURCE: setting on knob of diplomat oven

Im pretty sure that settings mean on the 1 line top element only comes on and 2 lines both elements come on hope this helps

Posted on Sep 06, 2009

Ad
  • 11 Answers

SOURCE: Hi I have a Diplomat

If you can hear the oven fan running but the oven is cold is is most likely to be the fan element at fault. If there is no obvious damage to the element it should be checked for continuity with a test meter.

Always isolate the appliance from the mains before investigating

Posted on Jan 22, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Numbers rubbed off Diplomat ADP3640 oven


Have the same diplomat the numbers have come off to . I have mine on twenty to if you was looking at a clock and it's about 180 . Half past is 160 . Right to top 220 .

Feb 16, 2013 | Ovens

3 Answers

How do you reset the clock on a Diplomat HJA 3300 oven? Would you by any chance have a pdf of the manual?


Press and hold the timer and casserole symbol buttons at the same time then press or - to set the time. If "auto" flashes you will have to cancel that programme.

Feb 25, 2011 | Ovens

1 Answer

Hi I have a Diplomat elite single oven (AAA3490). When I put the oven on, it is not warming up. Everything else looks fine. Any advice would be appreciated


If you can hear the oven fan running but the oven is cold is is most likely to be the fan element at fault. If there is no obvious damage to the element it should be checked for continuity with a test meter.

Always isolate the appliance from the mains before investigating

Jan 22, 2011 | Ovens

1 Answer

Setting on knob of diplomat oven


Im pretty sure that settings mean on the 1 line top element only comes on and 2 lines both elements come on hope this helps

Sep 06, 2009 | Ovens

1 Answer

The oven turns off after 30 mins


Is the clock re-setting and flashing? Either the fan is failing and the oven is overheating, or the thermostat is faulty and the oven THINKS it is overheating. It is a fail-safe kicking in, momentarily cutting power to the oven to avoid lasting damage.
Set the time on the clock and the oven should be okay to go again, but if problem repeats, replace the fan and/or the thermostat - it is difficult even for an engineer with all his equipment to diagnose which of the two is at fault, but its about all there is to go wrong on a gas oven.
Apparently!

Jul 01, 2009 | Whirlpool RBD305PD Electric Double Oven

1 Answer

Diplomat Select 620 single oven and no instructions


how do i remove the door to reseal the glass

May 14, 2008 | Ovens

1 Answer

Oven that refuses to oven


what were you doing the last time it worked baking broiling self clean if the clock isn't on turn the breaker off for 5 seconds then on reply to me with make and model number from the serial plate on the door if that doesn't fix it but don't rate me till we are done

Jan 09, 2008 | Ovens

1 Answer

Diplomat Oven ADP3650 Instructions


User manuals are hard to find.
The problem I had was setting the clock on a single Diplomat oven, with no clock button. Here's my solution :

DIPLOMAT OVEN OPERATING INSTRUCTIONS
The Diplomat single oven is controlled by two knobs and a set of buttons along the middle of the control panel.
The left knob sets the temperature of the oven, while the right knob selects the function to be performed, e.g. fan oven, grill, etc.
The buttons along the middle set the cooker clock, the start and end times of cooking, and the “+” and “-“ buttons will increase or decrease the time shown on the cooker’s clock.
PLEASE NOTE THAT THE OVEN WILL NOT OPERATE UNTIL THE CLOCK IS SET.
If there is any interruption to the power supply (including manually switching off at the main switch) the oven will not operate until the clock is reset.
Here’s how to set the clock:
First press simultaneously the first two buttons to the left of the control panel. They are marked as a Bell symbol (Alarm) , and a steaming Cooking Pot (Start of Cooking Time). Then immediately press the plus “+” or minus “-“ buttons to increase or decrease the time displayed. When the desired time has been reached, leave it for a few seconds, and it will remain set at this time. Any further changes to the displayed time will require this procedure to be repeated.
Hope this helps!

Oct 10, 2007 | Ovens

Not finding what you are looking for?
Ovens Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ovens Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

ashburton

Level 3 Expert

417 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Are you an Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...