Question about Bose Lifestyle T20 5.1 Channel Home Theater System

Open Question

Intermittent Error: Please make sure acoustic bass module is connected to the console or AC power

Hi, Whilst watching movie, I get this message and then the bose will reconnect and continue. It comes sporadically and we tried re connecting the console and sub woofer to the AC power. Still the message will come up in sometime. Any Idea? Please let me know and thanks for any help!

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

techman
  • 3130 Answers

SOURCE: lifestyle 12 by Bose

No sound ? Make sure the audio input cable is connected to the music center FIXED outputs, the black connector is fully seated in the music center SYSTEM CONTROL 1 jack, and the multi-pin connector is firmly seated in the Acoustimass module jack. ? Turn the music center off for ten seconds, then on again, to reestablish communication between the music center and the speakers. ? Check the connections for any external components. Make sure to select the correct source for the desired input. ? Check the speaker connections. ? Be sure the CD is placed correctly, label-side up, in the music center, and the cover is closed. ? Increase the volume. ? Check to see if MUTE is lit in the display. Press the MUTE button on the remote to unmute the sound. ? Disconnect any headphones. ? Connect the FM and AM antennas , and last but not least. Make sure there is power going to the remote speakers or the unit will not communicate with them. Good Luck

Posted on Jun 14, 2006

snakehead
  • 1074 Answers

SOURCE: Bose Lifestyle 28 not playing DVD

my brother i am not familiar with that model but due to my electroincs experience all dvd players are make up of the the same principle.there is a flat strip that leads from the lens of your dvd player kindly remove it and replace it this strip is probably broken after doing this get a dvd lens cleaner and clean your dvd lens and your on if you cannot do it your self take it to a tech os that they can handle it.this job should cost about $75.00 US. enjoy Henry Thomas from Belize

Posted on Mar 14, 2007

  • 4 Answers

SOURCE: Bose Lifestyle 48 Error code 801

We had this problem. I called Bose, and they reported that the 801 error is a hard drive problem. The unit started squealing while I was on the phone to support, and the guy heard it. Said the hard drive was failing.

$200 to ship the unit to Bose to replace the drive. Wish they had a secret warantee for what seems like a common problem.

Posted on Jan 13, 2008

cjackHD
  • 71 Answers

SOURCE: Hi, I have an error 180 message in my bose lyfestyle V20

"Error 180" is either very bad (video board is defective) or just a temporary fluke and meaningless.. Best case-> the "error 180" could be fixed by a simple reset (unplug the DC power cable from the media center for about 30+ seconds). Worst case-> this will have to be sent to Bose for repair. Try re-seating any HDMI or component cables at the back panel as well. If you can see your system menu (by pressing 'system' on the remote) then the video board may be fine. If not, still reset it before determining anything else. Also, if the input device (DVD player) is connected with HDMI, and the output (the V20) is component.. this canl cause the error as well.

Posted on Jun 12, 2009

  • 55 Answers

SOURCE: connecting Bose Acoustimas Wofer to a Sony receiver

you cannot hook a bose system up with any other system not even another bose

Posted on Sep 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

ZENITH MODEL SN 58427 WHAT IS THE VALUE


  • Epiphone Zenith Bass www.epiphone.com/Products/Bass/Zenith.aspx The all new Epiphone Zenith Bass features classic design styling with an elegant profile that pays tribute to great jazz guitars of the past with a gypsy style ...
  • Epiphone Zenith Bass Guitar - Fretless Canada online at ... www.shop.ca > ... > Bass Guitars > Electric Bass Guitars Epiphone Zenith Bass Guitar - Fretless Canada online at SHOP.CA - FSGSEPIEBTRFANB. Quality AssuranceIn spite of all the precautions taken by ...
  • Zenith Acoustic Archtop - The Unofficial Epiphone Wiki epiphonewiki.com/index.php/Zenith_Acoustic_Archtop The Masterbilt Zenith was characterized as a student level instrument. At 13 5/8" wide, this is a very small guitar for an archtop. It has a carved spruce top and ...
  • Epiphone Zenith Bass - Natural - Long & McQuade Musical ... www.long-mcquade.com/.../Bass/Epiphone/Zenith_Bass_-_Natural.htm Since 1873, Epiphone has been designing and making some of the most innovative and classic instruments including the Emperor, Broadway, Casino, Wilshire, Coronet and ...
  • Epiphone Zenith Bass - YouTube www.youtube.com/watch?v=CsuiVj3B9E0
    • BY BASS WHISPERER TV
    • 10 MIN
    • 132K VIEWS
    • ADDED 2011-01-18
    Video embedded ยท Ed Friedland - The Bass Whisperer demonstrates the Epiphone Zenith Bass for Guitar World Magazine.
  • Epiphone Zenith Acoustic/Electric Bass Translucent Black ... www.amazon.ca/Epiphone-Zenith-Acoustic-Electric-Translucent/dp/... Epiphone Zenith Acoustic/Electric Bass Translucent Black: Amazon.ca: Musical Instruments, Stage & Studio
  • Epiphone Zenith Acoustic/Electric Bass ' Musician's Friend www.musiciansfriend.com > ... > Acoustic Bass > Fretted Acoustic Bass
    • 4/5
    • 1 REVIEW
    Get the guaranteed best price on Fretted Acoustic Bass like the Epiphone Zenith Acoustic/Electric Bass at Musicians Friend. Get a low price and free shipping on ...

  • Feb 05, 2016 | Epiphone Music

    1 Answer

    Acoustic b600h


    Relay?? I've never seen a guitar or bass amp with "speaker protection relays"...usually they're either on or off. Check the simple stuff 1st...is speaker cable from head to cabinet and/or the input cable from bass to the amp good? Check the "Direct Out" for a line level signal (must be connected to a PA or other amplifier) as this is your preamp out signal. Also, plug a shielded cable from "Effects Send" to "Effects Return"...this will verify "effects" loop issues if any. Lastly, vibration test...use a clenched fist across the top, sides and bottom of wood cabinet to lightly "jar" the internal circuits. If it starts working even for an instant, I would suspect intermittent connection inside.

    Jul 30, 2014 | Acoustic B600h 600W Bass Head And B115neo...

    1 Answer

    Error code 1 and 3 on my Precor 9.21s treadmill?


    Precor Error 01, Memory, RAM, EEPROM Test Error Probable Cause This error message almost always indicate an upper PCA problem when they are consistently displayed. Failures causing this error message to be displayed are rare.
    Corrective Action If the error message is consistently displayed when the unit is powered up, the upper PCA should be replaced. It is possible to see this message displayed intermittently due to external causes. If the units A.C. input significantly dips during the power up test sequence the test could fail resulting in this message being displayed. Treadmills operating on non-dedicated A.C. circuits may see this message displayed on an intermittent basis. Precor Error Code 01

    Precor Error 03, Memory, RAM, EEPROM Test Error Probable Cause This error message almost always indicates an upper PCA problem when it is consistently displayed. Failures causing this error message to be displayed are rare.
    Corrective Action If the error message is consistently displayed when the unit is powered up, the upper PCA should be replaced. It is possible to see this message displayed intermittently due to external causes. If the units A.C. input significantly dips during the power up test sequence the test could fail resulting in this message being displayed. Treadmills operating on non-dedicated A.C. circuits may see this message displayed on an intermittent basis.
    Precor Error Code 03 E03 EEPROM Test Error

    Mar 27, 2013 | Precor 9.21s Treadmill Display Console...

    1 Answer

    Error code 80029940


    It sounds like a disk read error. In the future please supply information on what you were doing win the error occured. i.e. playing a video game, watching a Bluray movie... etc.

    Likely that the movie itself is the issue. Try unconnecting your PS3 from the internet reseting and trying to play the video again without your PS3 connected to the internet..

    Good luck.

    Jul 16, 2011 | Sony Playstation 3 (PS3) Console

    1 Answer

    I am trying to watch a movie on net flix, however everytime I tried to look for the internet service the following error comes up: Error code 51330 is unable to connect to the internet.


    Hi there!
    Error code 51330 on the Wii means that the password you entered into the Wii to set up your internet was entered incorrectly. You will need to go back into your internet connections settings menu on your Wii and enter the correct password/security key for your router. Please remember the security key is case sensitive.
    Hope this helps!

    Jul 05, 2011 | Nintendo Wii Console

    1 Answer

    My wii keeps showing 51030 what does that mean and how to fix it to watch movies


    error 51030
    http://www.nintendo.com/consumer/wfc/en_na/ds/results.jsp?error_code=51030&system=Wii&locale=en_US
    means that your wii is having trouble connecting to your wireless network.
    please make sure that you wireless network signal is in range of the wii
    setup your wii with wifi by going to the wii button on the home screen
    wii settings> then page 2 select the internet.
    go to wireless connection and connection 1 to setup your wifi.
    search for access points and input the wireless security password to connect to the wireless network.
    if this worked and you still get the error code please power cycle the wii and also check your wireless connection settings and any interference from other wireless networks. you may need to change the channel for the wireless network to 1 or 11.

    Mar 28, 2011 | Nintendo Wii Console

    1 Answer

    Error message error occurred. press the eject button and remove the disc. turn the power off and follow the instructions in the console manual.


    First turn the Wii console power OFF, and remove the AC adapter's AC plug from the power socket. Next, check wheather the disc is dirty or scratched. If it is dirty, gently wipe with a soft cloth from the center to the outside. Wait about 5 minutes. Then plug the AC adapter's AC plug back into the power socket and turn the console power on.

    If the same message still appears, the Wii console may be damaged. Turn the Wii console off immediately. Remove the AC adapter's AC plus from the plug, and visit support.nintendo.com for additional troubleshooting or call 1-800-255-3700.

    http://igotwii.com/nintendo-wii-manual-error-messages-page-68-69

    Jan 04, 2011 | Nintendo Wii Console

    1 Answer

    Got error 10 and dont know what to do


    from REalMacoi your problem seems to be related with the AdaptIQ failing to do an active equalisation. HAve you connected the AdaptIq sense headphones on the AUX (left and right coz it will still fail if only one cable is connected) Also make sure tha the sense headphone cable is in the correct color orientation and none is connected to the black jack just below the red one. Try this procedure and if the system still shows error 10 do the following in sequence...

    1. Turn off the media center via the"ALL OFF" button in the tray (no DVD disc inside the tray)
    2. Turn off the bass module by the power switch underneath the bass module (certain versions may not apply)
    3. Unplug the power adaptor of the media center and remove the power adaptor connection from the wall socket.
    4. Unplug the bass module (if this has not yet been done
    5. Disconnect all speaker wires (satellite speakers I mean)
    6. Disconnet the data cable linking the bass module and the media center
    7. Allow 10seconds to pass
    After 10seconds then connect the following again in this sequence

    1. Connect the media center and the bass module data cable first
    2. Connect the satellite speaker cables.
    3. Connect the media center adaptor (DO NOT TURN ON YET!)
    4. Lastly connect the bass module power cable (DO NOT TURN ON YET!)

    Once verything is connected, press power "ON" button o nthe RF remote and the media center should turn on. Only the you should switch the bass module power "ON" so that a fresh handshake is achieved.

    This ERROR 10 occurs when either the ADAPTIQ process is interrrupted, the data calbe link between the bass module and the media center is loose or when the power connection is interrupted.

    If all still fails, then there is a problem with the DSP board of the bass module and would require servicing.

    I do hope I was able to help you

    Sep 21, 2010 | Bose Lifestyle 28 System

    1 Answer

    Code 10


    Hi, your problem seems to be related with the AdaptIQ failing to do an active equalisation. HAve you connected the AdaptIq sense headphones on the AUX (left and right coz it will still fail if only one cable is connected) Also make sure tha the sense headphone cable is in the correct color orientation and none is connected to the black jack just below the red one. Try this procedure and if the system still shows error 10 do the following in sequence...

    1. Turn off the media center via the"ALL OFF" button in the tray (no DVD disc inside the tray)
    2. Turn off the bass module by the power switch underneath the bass module (certain versions may not apply)
    3. Unplug the power adaptor of the media center and remove the power adaptor connection from the wall socket.
    4. Unplug the bass module (if this has not yet been done
    5. Disconnect all speaker wires (satellite speakers I mean)
    6. Disconnet the data cable linking the bass module and the media center
    7. Allow 10seconds to pass
    After 10seconds then connect the following again in this sequence

    1. Connect the media center and the bass module data cable first
    2. Connect the satellite speaker cables.
    3. Connect the media center adaptor (DO NOT TURN ON YET!)
    4. Lastly connect the bass module power cable (DO NOT TURN ON YET!)

    Once verything is connected, press power "ON" button o nthe RF remote and the media center should turn on. Only the you should switch the bass module power "ON" so that a fresh handshake is achieved.

    This ERROR 10 occurs when either the ADAPTIQ process is interrrupted, the data calbe link between the bass module and the media center is loose or when the power connection is interrupted.

    If all still fails, then there is a problem with the DSP board of the bass module and would require servicing.

    I do hope I was able to help you

    Apr 03, 2009 | Bose Lifestyle 18 System

    1 Answer

    Power supply/ no output voltage


    Actually i haven't fixed the problem as yet but i did find some info that would help me to fix problem.
    I went to google and entered keyword,,, Electronic parts,,there came up a page,,and i went to several manuf sites till i found a replacement transformer,,then i disassembled the power supply and am now waiting for a replacement transformer.

    Sep 21, 2008 | Boston Acoustics MicroMedia Computer...

    Not finding what you are looking for?
    Bose Lifestyle T20 5.1 Channel Home Theater System Logo

    Related Topics:

    231 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Bose Audio Players & Recorders Experts

    The Knight
    The Knight

    Level 3 Expert

    74136 Answers

    Electro Med Services...
    Electro Med Services...

    Level 3 Expert

    6694 Answers

    Ben Armstrong

    Level 2 Expert

    334 Answers

    Are you a Bose Audio Player and Recorder Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...