Message i want to put set a password for my messages so that nobody can read it

I need my mobicel candy protection password

The reset button is a small pin hole about 2inches on the same side as the power button on the superhub.
The power button is on the opposite side of the virgin led, which should be the left hand side when your looking at the front of the hub.
You will need a pin to reset it, put the pin in the hole and keep it pushed in until all the lights turn blue. Once the lights have turned blue it will then restart itself.
The default username and password is
username = admin
password = changeme
Now if that doesn't reset it to factory default then you need to go into the hub settings click on the "superhub settings" tab and you will see the option to reset to factory settings.

what phone is it?
it will just be a security setting. you will find the solution in the manual or by messing with the settings but without specifying the make/ model nobody can help

The new Belkins already have security set up. I would not change it, and yes I have a Belkin.

Here is there user friendly web site:
http://www.belkin.com/us/support-article?rnId=7005

Try reading the manual.

Get onlineand got to www.google.com In the google search box type: "ToshibaSupport" (without the quotes and put your manufacturer name before Support). Look for downloads and drivers. Enter your model number and operatingsystem when requested. Look for manuals and search them for Bios Password.
The manual will tell you how to reset or disable the bios password.

open a browser window and then type http://192.168.1.0 or http://192.168.1.1 and enter your router settings. change settings including password. unless you've set it up differently and actually have a username and password, leave the username space blank and use "admin" as the password. that's often the default password on a linksys. linksys has a great support page. they have the drivers, manuals, the works. the manual will also have the default password, plus how to do the default reset. here's the link http://homesupport.cisco.com/en-us/wireless/linksys/

if you have not set any password, type 12345 as the default password and see if it will be accepted.

Well, I called Panasonic, and they performed a few setting changes.

It sounds to me that someone has passworded the hard drive. If you do not know the password, there is no way to access the hard drive. The two options in this case are get the password from whoever put it on or uy a new harddrive. People usually password their harddrive in case it is stolen or lost, then nobody can read thei data or use their computer.

To keep your voicemail messages secure most vendors keep this is an administrator function or at least a technician level change, you will need to contact your system admin or your Phone vendor to reset your pass-code.