Question about Health & Beauty
Keep getting err. O message
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
This is a reply I received from Taylor customer support. I have followed this procedure enough times to wear out the original battery and still get the Err 1 message. You may have better luck.
Thank you for your e-mail. The reboot below may clear the error from
your scale. You may need to do this several times to completely reboot
the system. Please let us know if you have any questions or continue to
display the Error.
1. Remove the battery from the scale
2. Set the scale on the floor without the battery in place.
3. Stand on the scale for 10 seconds (still without the battery)
4. Carefully replace the battery without turning the scale on.
5. Using only one foot, tap the scale or apply just enough pressure to
turn on the display. (It should show dashes or zero's) IMMEDIATELY
REMOVE YOUR FOOT.
6. Let the scale turn off
7. Step on the scale for a weight reading
Taylor Precision Products
& Salter Housewares
2220 Entrada del Sol, Suite A
Las Cruces, NM 88001
Toll free - 800-289-0944
Direct - 575-526-0944 ext 3172
Posted on Jun 24, 2009
I have same problem - the instruction manual that came with the product does not explain how to use the Liquid function and I cannot figure out how to access this.
Posted on Dec 01, 2009
SOURCE: I have a set of
Below is what I copied from the manual for body fat analyzer from Terraillon. The meaning of error 2 (Err2) is included
Display In the case of:
Err0 Incorrect initialisation: begin again as
Err1 Unstable weight: begin again.
Err2 Overload: remove weight immediately.(max weight capacity 350lbs)
Err3 Body impedance exceeds the limit
(100 ohm - 1kohm): begin again.
For certain skin types an Err3 reading
may occasionally appear. In this case
you may need to dampen your feet to
improve the contact with the electrode
Err4 Percentage of body fat above the
Err5 Percentage of body water is beyond
the range. Clean the bottom of feet
with damp cloth and step on the
Lo Battery failure: replace it.
Posted on Aug 21, 2011
Tips for a great answer:
Jun 23, 2016 | Terraillon Health & Beauty
Jun 22, 2016 | Terraillon Health & Beauty
Feb 27, 2015 | Terraillon Health & Beauty
Sep 10, 2011 | Terraillon FBC Alteo Family Body Control...
Aug 14, 2010 | Health & Beauty
Apr 27, 2010 | Terraillon TCM Nuance Memory Bath Scale...
Aug 27, 2009 | Health & Beauty
74 people viewed this question
Usually answered in minutes!