Question about Refrigerators

1 Answer

Refrigerator G E pds22scrarss programable refrig. unit temp is 14 and 74, push the button to reset temp and the temp will go to new setting but when set light goes off it reverts back to 14 and 74. note: 74 is above the max setting of 47. please help.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 304 Answers

Unplug it for 2 minutes to do a hard reset. If it does not reset check the temperatures with a thermometer if the temps are off by more than 5 degrees your temp sensors are out of range

Posted on Jul 26, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

JOE LLAMA
  • 26 Answers

SOURCE: subzero 690 flashing EC and service

Rhino, this is yet another simple fix. You need to call subzero and let them know that your ref section is not cooling properly. 9 out of 10 times it will be a problem with the evaporator coil needing replacement. Sub is aware of this issue and usually picks up the tab for this repair.

Posted on Mar 31, 2008

  • 1 Answer

SOURCE: My Samsung refrigerator will not cool

Call Samsung. I had the same problem when Best Buy delivered mine. The delivery people left the fridge in demo mode. The people at Samsung will talk you through it, it is very simple. The fridge should work fine then.

Posted on Jun 25, 2008

  • 51 Answers

SOURCE: norcold rv refrigerator freezer

Make sure the thermister is attached firmly to the fins in the back. The boards on a Norcold can be reset a service center familiar with this process is your best bet. It takes disconecting the board and then shorting it out best to leave it to some one who is familiar.

Posted on Sep 08, 2008

  • 1 Answer

SOURCE: Everything in the refrigerator is freezing

The 37 degree reading you're seeing is the temp. setting, not the present actual temp. When it jumps back to 22-25 its telling you what the actual temp is inside the refrig....simply wait about 24 hours. It should then read about 37...that is, the temp you set it at 24 hours previously.

Posted on Jan 23, 2009

BIKER T
  • 909 Answers

SOURCE: GE Profile Arctica Refrigerator Displays OFF PSS29NGNAWW

Sadly i would say the board is malfunctioning and needs replacement. There is nothing in the fridge/ freezer that if malfunctions can cause that.

Posted on Sep 21, 2009

Testimonial: "Exactly what I thought. Thank you very much. Do you know the exact part number to purchase?"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to set freezer on LG Bottom Freezer LRFD22850


Hello Fran Miller,

For OPENERS... (my opinion)
always start by setting you temperatures at mid range.

Owners manual... Page 16
Setting the controls 16 - 17 Adjusting control settings...

http://www.searspartsdirect.com/partsdirect/user-manuals/LRFD22850ST-LG-Parts-Refrigerator-Parts-manual


I get a little PUSHY about FOOD TEMERATURES...
(stored poorly there's no quicker way of poisoning ones self)...

I strongly recommend getting TAYLOR refrig/freezer
THERMOMETERS (like Amazon... cheap = $6 ea).

Let the refrigerator stabilize EMPTY 24 HOURS
Loaded with food (not recommended: 72 hours).

ADJUSTING CONTROL SETTINGS
Give the refrigerator time to cool down completely before adding food. It is best to wait 24 hours before you put food into the refrigerator. The mid-settings indicated in the previous section should be correct for normal household refrigerator usage. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm.

THERMOMETERS
Amazon com Taylor Refrigerator Thermometer 20 Deg To 80 Deg 3 1 4 3 3 4...

Hope I am helping

Carnac the Magnificent

Jul 11, 2017 | LG Refrigerators

1 Answer

HOW TOIncrease refrig side temp IN mODEL795.5137


Have you tried reading the user instruction manual page 17? Click HERE 795.5137 User Manual

APPLIANCE 911

Nov 16, 2015 | Refrigerators

1 Answer

Put new water filter in Refrig an reset light but the red light won't go off or green light won't come on


Todd,
How many times did you push the reset button. Some of the units I am familiar with, you have to push four or five times and hold on the last one until it changes. Hope this helps!

May 11, 2015 | Refrigerators

1 Answer

GE PROFILE REFRIGERATOR MOTHER BOARD PROBLEMS i REPLACED THE MOTHERBOARD AND IT STILL DOSEN'T KEEP THE PROPER TEMPERATURE. It varies from 36 to 45 degrees.


Go into the diagnostic mode on your touch display .
1) . Press any button on the display 1 time except the temp adjust buttons.
2) Press the temp up and down on both the freezer AND refrig (all 4 at the same time)
3) when 0's show , release the buttons and press any button except for the temp adjust buttons .
4) NOW , fress the temp adjust buttons until the freezer side displays 0 and the refrig side displays 7 . 0 and 7 is for the thermistors test .
5) After 0 and 7 display , press any button again except temp adjust , and this will start the thermistor check .
6) You will have 7 thermistor tests , indicated on the refrig display , starting at 1 , then 2 then .......
7) The feezer display will tell for the corresponding thermistor , indicated by the refrig display , if the thermistor p = pass , s = short , b = bad (replace board)

After determining if or which thermistor is bad , then adjust the display to 1 on freezer display and 6 on the refrig display . This ends the testing procedure and resets the refrig back to normal .

Sep 26, 2009 | GE Profile PFCS1NJWSS Stainless Steel...

1 Answer

GE Profile Arctica Refrigerator Displays OFF PSS29NGNAWW


Sadly i would say the board is malfunctioning and needs replacement. There is nothing in the fridge/ freezer that if malfunctions can cause that.

Sep 21, 2009 | GE Profile PCF25PGW Side by Side...

1 Answer

The refrigerator temp keeps returning to 65 after I set it at 34.


After you set the temp (at 34) the refrigerator display changes to show the current temp inside your refrig. (apparently it was 65) As the unit runs, this display will lower until arriving at the set temp.

Jul 01, 2009 | GE (PSS26MSRSS) Side by Side Refrigerator

1 Answer

642s Temp Setting Does Not Work


Possibly, but check your condensor before calling for service.

May 28, 2009 | Sub-Zero 642

1 Answer

Freezer temp is rising to 12 degrees and doesn't reset


Most likely your computer board got zapped. It's usually located on the back of the unit. Have you tried to reset the unit by leaving it unplugged for about 20 minutes?

Nov 29, 2008 | GE Refrigerators

1 Answer

Everything in the refrigerator is freezing


The 37 degree reading you're seeing is the temp. setting, not the present actual temp. When it jumps back to 22-25 its telling you what the actual temp is inside the refrig....simply wait about 24 hours. It should then read about 37...that is, the temp you set it at 24 hours previously.

Nov 23, 2008 | GE Profile PFS22 33" Artica French Door...

Not finding what you are looking for?
Refrigerators Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4654 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Brian Coughlan

Level 2 Expert

275 Answers

Are you a Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...