Vivotek live client

LDP sessions are established based on TCP connections using MD5 authentication. The TCP connection cannot be established, if one end is configured with MD5 authentication while the other end is not, or the MD5 passwords on the two ends are different. If MD5 cipher text authentication is proprietary on other vendors' devices, Huawei devices cannot set up a TCP connection with these devices.

TN11D4001 Huawei TN11D4001 Board Thunder link com

Do you connect your PC to router in an administrator role using web browser? Or do you connect some device to Wi-Fi network?

1. Administrator role: You need to have correct login name and password for admin access. Search in manual or ask Google for default login name and password of your router type. If non-default password is set in the router then you must reset router setting and erase its settings to default (factory) status. You will lose all router configuration but default password is back.
   
2. Wi-Fi client role: There are more possibilities why authentication fails in wireless communication. Mentioned error message describes what kind of problem occurred.
   (a) A password you put to client device does not match the wireless network password which is set in router. Your computer, tablet or smartphone WI-Fi interface must have exactly same password as WI-Fi network which is transmitted from router. Check and compare passwords on both sides, in client device and in router.
   (b) Client Wi-Fi interface security (encryption) mode differs from Wi-Fi network encryption used in router. But the same mode must be set on both sides (client and router) for successful connection.

Encryption modes are

• WPA2 Enterpise
• WPA2 PSK ("home")
• WPA Enterprise
• WPA PSK
• WEP
• No encryption (open)

Higher position - better security. Enterprise Wi-Fi modes require security devices like authentication servers, certification authorities etc. They are not used in home networks usually.

Go to this site for the instructions to install your email on your tablet.

http://www.dummies.com/how-to/content/how-to-set-up-email-on-the-samsung-galaxy-tab.html

Here is Microsoft forum on the error code
Windows mail error code 0x800ccc90

Cause for this error is generally The client is trying to use Secure Password Authentication and it is not enabled on the Exchange Server computer. To verify what form of authentication the Outlook Express client is using, in Outlook Express, on the Tools menu, click Accounts, and click the Server tab for the account that failed.

Also when your adding the 19 to the email it is creating a whole new email. So if you created the new email. then please refer to this link
POP3 Outlook Express error 0x8000CCC18 and Exchange Server

The outgoing server probably requires authentication (usually the same password as for the incoming server). Is your email client sending authentication? Look for a checkbox saying something like: "Outgoing server requires authentication."

Also, I just want to make sure that you can't use "smtp.live.com-25-TLS as the address for your server. The server is smtp.live.com, the port is 25 and encryption is TLS.

TO SETUP MAIL CLIENT TO ACCESS WINDOW LIVE HOTMAIL ACCOUNT,USE THE FOLLOWING HOTMAIL POP3AND SMTP CONFIGURATION SETTING.

INCOMING SERVER(POP3): pop3.live.com
INCOMING SERVER POP PORT:995
INCOMING SERVER POP SSL ENCRYPTION:YES(ON OR REQUIRED)
OUTGOING SERVER:smtp.live.com
OUTGOING SERVER PORT:25
OUTGOING SERVER AUTHENTICATION:YES(USE POP USERNAME AND PASSWORD OR HOTMAIL CREDENTIONAL)
OUTGOING SERVER TLS OR SSL ENCRYPTED CONNECTION:YES(ON OR REQUIRED)
TIPS: OUTGOING SERVER OF HOTMAIL ALSO SUPPORTS PORT 587,USEFUL FOR PEOPLE WHO ENCOUNTERS ERROR FOR SMTP DUE TO ISP BLOCKAGE OR ANY OTHER REASON
USERNAME: YOUR HOTMAIL ID
PASSWORD: YOUR PASSWORD FOR YOUR ACCOUNT
NOTE: LOG ON USING SECURE PASSWORD AUTHENTICATION (SPA) CHECK BOX IN OUTLOOK,OUTLOOK EXPRESS OR WINDOW LIVE MAIL SHOULD NOT BE SELECTED.

THANKS FOR USING FIXYA.

To setup mail client to access Windows Live Hotmail account, use the following Hotmail POP3 and SMTP configuration settings:
Incoming Server (POP3 Server): pop3.live.com
Incoming Server POP Port: 995
Incoming Server POP SSL Encryption: Yes (On or Required)
Outgoing Server (SMTP Server): smtp.live.com
Outgoing Server SMTP Port: 25
Outgoing Server Authentication: Yes (On - Use POP username and password or Hotmail credentials)
Outgoing Server TLS or SSL Secure Encrypted Connection: Yes (On or Required)
Tip : Outgoing Server of Hotmail also supports port 587, useful for people who encounters error for STMP due to ISP blockage or any other reason.
User Name: Windows Live ID (e.g. [email protected])
Password: password used to sign in to Hotmail or Windows Live service
Note: "Log on using Secure Password Authentication (SPA)"

Copy this site and paste it in your web
browser, then when you get on the site,
select your product and download your
driver for your webcam drivers.

http://www.apexcctv.com/p-98-vivotek-
pt7137-ip-ptz-wireless-camera.aspx

VivoTek PT7137 Downloads
* Vivotek
PT7137 Quick Install Guide
* Vivotek PT7137 Manual
* Vivotek PT7137 Firmware
* Vivotek PT7137 Software Download
* Vivotek PT7137 Software User's
Manual
* What You Need to Know About PoE

Video Tutorials for Free Vivotek NVR
Software

Then after completing the download do
this.
Disconnect the Camera from the USB
port and reinstall the CD or Downloaded
software program. When the program
asks you to connect the camera to the USB
port, do so and it should work.
Then to use it on the Web, do this.
Web Camera's have to be setup on the
program they are to be used with. Just
installing the camera on your computer
does not set it up to broadcast on
messengers or Skype.

Each program has Options that have to
be setup in order for the Audio and
Video to function properly.

A. Skype Setup:
After downloading and installing Skype

http://www.skype.com/intl/en-gb/
download/skype/windows/beta/
downloading/

set it up as follows:
Go to Tools, then Options, and click on
Audio Settings and set the Microphone
and Speakers to the computer Audio
Card.
Then click on the Video Settings.
The camera, if Installed Properly, it will
come up and show a video picture.
Then, on the bottom of the page click
save.
The camera and audio should function
properly. Your friends and Family will
now be able to see and hear you.

B. Yahoo Setup:
After downloading and installing Yahoo
Messenger

http://www.soft32.com/download_30.
HTML

set it up as follows:
Go to Messenger at the top left and click
on it.
Next go down to Preferences and click
on it.
Next Calling and Devices on the right and
set the Microphone and Speakers to the
computer Audio Card.
Next go to the Test Audio section and
(in blue writing) click on "Open the call
setup assistant" and follow the instructions
on the left window.

C. Windows Live Messenger:

http://download.live.com/Messenger

After you start Windows Live Messenger,
expand the view by clicking on the
square on top left next to the red X.
Then on the Windows Live messenger
window on the right side, click on
"Show Menus." And then click on "Show
the Menu Bar".
Next go to the Menu Bar on right side,
click on " "Action."
Go to "TOOLS" and click "Audio and Video
Setting" and follow the instructions.
NOTE: Your audio and video should work.
Enjoy.
When done both the Audio and Video will
function properly so you can chat and
see family or friends you are connected
to.

D. AIM (AOL) Messenger:

http://dashboard.aim.com/aim

On the VIM sign-in window click on Edit.
Then click on Settings Enhanced IM.
Next click on Enhanced IM.
Then click on Audio Video.
The Audio and Video portion has drop
downs so you can select the proper
audio card and video camera installed
in you computer.
The Audio Video drop downs are
Microphone
Speaker
Camera
The audio and camera should function
now.
Additional information to use with VIM
settings.
Adjust Your Audio and Video Settings:
In order to adjust your audio and video
settings, please follow the steps given
below:
1. Click the Audio and Video Settings
button directly below the My Buddy or My
Camera window. If you are currently
Participating in an AOL Live Video IM
session, a message will display: You
must disconnect the current AOL Live
Video IM
Conversation before running setup.
Would you like to disconnect now? Click
the Yes button.
2. The Audio and Video Tuning Wizard
will appear to help you verify that your
camera, speakers and microphone are
working
Properly. Follow the on-screen prompts.
Notes:
The first time you use AOL Live Video IM,
a message will display: Would you like to
first check your audio and video settings?
Click the Yes button.
The Audio and Video Tuning Wizard will
appear to help you verify that your camera,
speakers and microphone are working
properly.
Follow the on-screen prompts.
images in AOL Live Video IM may appear
reversed, or as a mirror image (text may
appear backwards) when you look at your
own camera feed or at the Picture-in-picture
(PIP) display.
After making the settings your ready for
a chat and video talk with your Family
and Friends.
Hope this helps. Bud

Here’s the information to configure your account on your preferred e-mail client:

- POP3 Server: pop3.live.com (port 995)
- SMTP Server: smtp.live.com (port 25) {Note: If port 25 has been blocked in your network or by your ISP, you can set SMTP port to 587 with TLS or SSL Encryption depending on the client in use}

Note: Please make sure to check the box that indicates that your outgoing server requires authentication (in most e-mail clients, this is not checked by default).

- Username: your full e-mail address
- Password: your Windows Live ID passwor

Also, our POP3 service requires that you use Secure Sockets Layer (SSL) with the POP and SMTP connection and use SMTP authentication. This is to ensure that your e-mail address and password are not subject to tampering.