Videocon bazoomba tv circuit diagram

If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Search the site by type in the "brand name" of your device, in the "Search box at the top right of the Homepage" to get gathered related posts. Circuit diagrams of SMPS section of many popular brand devices are given. You can get details there.

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Circuit diagrams of many popular brand devices are given. Search the site by type in "Videocon" in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.
There are more than 20 posts related to this brand.

Hi Jintu,
Generally electrolytes in power supply are found to be defective in this set for late start.

Fault in the main power supply regulator section circuit. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/

????????? TV WOFAR SARKIT

If it shows picture at first, and after some time displays a vertical line at the center of the screen, check the connector that goes to deflection yoke for loose connection at its bard end socket, and check all the solder terminals of capacitors at horizontal output section. If you wish to get some details, http://electronicshelponline.blogspot.com/ Pull up older posts.

Check its horizontal output stage circuit for any short. Check the horizontal output transistor, for collector to emitter, of collector to base, leak. Replace it with a new one and check whether the newly replaced transistor gets too hot. If so, suspect the FBT. To get some details, http://electronicshelponline.blogspot.com/ Pull up older posts.

If you wish to get more details, surf the following link. There are over two thousand and four hundred posts. All are related to television and other domestic electronic equipment service help. You can get a solution there. Type in the brand name to your device to its search box, can be located at the top right of the display window. It will make search easy. More than Nine and half Lakh viewers cannot be wrong.
http://electronicshelponline.blogspot.com/

The vertical sweep output section circuit to your TV is faulty. Check and replace all the electrolytic capacitors; 5 or 6 of them; at the vertical output section. Check for any loose solder terminals. Resolder the suspected solder terminals, by applying a little more fresh solder, without making any solder bridge short in between adjecent solder terminals.