Its not connection to my PS3 anymore

*NB: it will ONLY work for communications, NOT for game audio. (lame az, I know!)

1. hold in the headset's power-on button until it flashes red/blue for pairing.
2. Next make the ps3 scan: settings> accessories settings> manage bluetooth devices> register device (yes)> scan and add. (probably passkey 0000)
   

How to connect any Bluetooth headset to your PS3

1) Make sure your headset is charged

2) Make sure it is OFF. This means there will be no blinking LED light. To turn it ON, hold for one second (like the manual says), it will do a long blink once, then intermittent short flashes to let you know it is on. To turn it OFF, hold for five seconds. It will do another long blink, then it is off and won't flash anymore.

3) Once it is OFF, hold the button for five seconds. This is the only time you turn it ON by pressing for FIVE seconds. The light will then go solid blue (like the manual says), and stay on, not blinking. You are now in discovery mode.

4) Now when you do Scan under the headset part of the menu, you should see something like the name of your headset. If there is anything else listed there, ignore it- that's probably just a cellphone or something else you have lying around in the house.

5) Select the headset and you are good to go.\

Also, the other common causes include that the headset could be paired with another device like a phone so the ps3 is not able to connect to it.
Lastly, if it has a usb port, you can connect your usb to it and then to the ps3. After that, go over the whole process again and it should work perfectly.
Hope this helped you? Please comment for more information

Hold the power button for 6-10 seconds when ps3 is searching- light will flash red and blue on the headset-- good luck getting it to work in Black Ops though.

I have the same unit. It does work PS3 just fine, but the instructions included with the Bluedio H9 are vague and poorly written.

First fully charge it. Then hold the mulit-function button down for 5 seconds or so. It will turn on (light will flash blue)...then keep holding the button down another 5 seconds or so and the light will go solid blue. Now you are in "discovery mode" if you don't get it into discovery mode, your PS3 can't find it.

Go to the "Settings" tab on the PS3's cross-media bar and select the "Accessory Settings" menu. From the new menu, select "Scan for Bluetooth Device."

After you have added the Headset, you can control the Mic pick-up level (1 to 5) under Accessory Settings -> Audio Device.

Good Luck

Pairing the Headset with the PS3
Before the Headset can be used with the PS3, the two devices must be ‘paired’ so they can communicate with each other. Use a gaming controller for this procedure and ensure that the Headset is powered on (flashing blue LED light) and that it is not being charged via USB cable.

1. Power on your PS3 console.

2. Within the “Settings” menu, press X on “Accessory Settings.”

3. Press X on the icon labeled: “Manage Bluetooth® Devices.”

4. Scroll down and press X on the icon labeled: “Register New Device.”

IMPORTANT: Depending on your model of the 8860 Bluetooth® Headset, your power button is either an oval shape with an icon of a circle with a line going through it (5a) or it is a button with a phone icon (5b). Please follow the appropriate next step depending on your model of the 8860.

5a. Once at the next screen, prepare the Headset to be paired with the PS3 by holding down the K1 button until the LED flashes Blue and Red (hold K1 approx 12 seconds).

5b. Once at the next screen, prepare the Headset to be paired with the PS3 by tapping the pairing button located next to the volume controls on the side until the LED flashes BOTH Blue and Red.


6. Once the Headset’s LED indicator is alternately flashing Blue and Red (indicating the Headset is ready to be paired), press X on “Start Scanning.”

7. Once Scan is complete, the PS3 will recognize all Bluetooth devices within range.

8. Locate “8860” from the list of available devices and press X on its icon to be prompted for a Pass Key

9. Enter 0000 (four zeros) as the Pass Key and press X on OK

10. You should then be taken to a new screen stating: “Register completed”

Trouble Shooting
Q. The PS3 is unable find the Headset.
A. If the Headset has been paired with another Bluetooth device, the PS3 will have trouble finding the Headset. Either remove the Headset from the paired device or turn off the Bluetooth power on the paired device.

Source: www.madcatz.com/faq

Make sure that your blue tooth is in pairing mode when the sysytem is scanning.(refer to blue tooth headset manual for intrustions)
I hope i have helped and I hope it works!!

turn the device off (red LED flashes) then hold the button for atleast 10 seconds until both BLUE and RED LED flash aternatively... not just blue, pairing code is 0000

Hi,

This is the info i got when i was looking to pair my headset with my PS3.


1. Turn your bluetooth headset on. It should flash on/off every few seconds.

2. Go to Settings > Accessory settings > Manage bluetooth devices.

3. Put the headset in "pairing mode".

4. Start to scan for the device. PS3 should pick it up. It will display the model if successful.

5. Once it's found it hit the options button. Connect the device (pairing mode) A blue icon will pop up.

6. Your headset will stop flashing meaning it has connected successfully.

7. Go back out and click on the audio device settings.

8. Input device > select "your headset". > output device > "your headset".

9. Hit the "connect bluetooth" icon. Then OK.

10. Your headset should now be successfully connected.. start talking into it to see the bar level move up and down to confirm its working.
Hope it helps.

Best Wishes,

Karlos

Make sure the headset is off and there are no flashing lights. On ps3 go to settings and look around cuz i cant remeber were it is at but look for manage devises or manage blue tooth devices something like that. You will select that and it will ask you if you want to search for devices. WAIT! First you need to put your headset in pairing mode. Hold down the side button (the one that flashes blue when it is on) and you will see it turn on and flash. DO NOT LET GO OF THE BUTTON!! KEEP IT HELD DOWN UNTIL THE LIGHT STAYS BLUE, NO FLASHING. you are now in pairing mode! Select search for bluetooth devices on your ps3 and it will begin scanning. keep your headset close to your ps3. When your ps3 finds it, it will ask for a code. Enter 0000. Thats it! ENJOY!

Ok people, here is how it is done- Turn off your bluetooth. When it is off, press and hold the main button (power button) until it flashes(keep holding even after it flashes). The light on the device should turn solid blue (instead of flashing) now you can let go of the power button. My device was picked up immediately... after 2 hours of trying to figure it out of course, lol. Hope it works for y'all!

~Live long and prosper ;)