Question about JVC KD-AVX2 Car DVD Player

1 Answer

Display loses power

My avx2 diplay constantly resets itself. The audio will not stop playing but the screen goes blank and resets to the EXAD bootup screen. HELP!!

Posted by on

  • RJM06 Nov 07, 2007

    My JVC KD AVX2 Car DVD Player has the same current malfunction, when I slid the face to the stereo, the face stays lit for about 1-2 mins then the face shuts off and the sound continues to play, but i am not able to change stations nor lower or raise the volume.

    1. I have reset the system; on the face of the stereo there is a reset button I held for a couple of seconds for reset when on

    2. I have checked the wiring an harnes but all was professionally done no loose wires

    3. I used an air duster to dust out any dust or dirt in the stereo

  • duren Dec 29, 2007

    I have the same problem, no display, buttons light up though and sound plays for a few seconds before switching off, checked yellow wire, all in tact.



1 Answer

Verify the yellow wire that comes out from the back of the unit(the small plug on the left of the back of the unit).This wire usually not stay in the plug.

Posted on Oct 15, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a Sony CDX-GT310 FM/AM Compact Disc Player with detachable faceplate. The unit still plays fine, but the display on the faceplate quit working. I've tried resetting the unit as well as cutting...

check the connectors between the faceplate and the unit carfully they can get damaged with constant removing/refitting if not the faceplate and/or unit is faulty

Dec 09, 2017 | Sony CDX-GT310 CD Player

1 Answer

I have a C4180 printer but today when i turned it on the display screen is blank. Can anyone help me?

Sometimes my screen goes blank also and I just hit the OK button, i6t might just be resting. Also, Unplug the printer and plug it back in. Seems to work for me when I have to stop a print job. It resets itself, I think.

Oct 30, 2010 | HP Photosmart C4180 All-In-One InkJet...

1 Answer

Water damage touch screen not working think its getting worse as sometimes does not read game 1st time and screen goes blank sumtimes 2


Water damaged screen means total loss, You must have to chage screen. First time while you switch on it water is presented on TFT display, And its damaged to diplay & normaly is blank sometime. Check it in service center of it.,


Sep 23, 2009 | Nintendo DS Lite Console

1 Answer

Lenovo 3000 n100 notebook display problem

Appears the backlight for the LCD display has stopped working. This usually needs to be replaced by a professional unless you are electronically and mechanically savy.

Jul 10, 2009 | Lenovo 3000 N100 0768 - Pentium Dual Core...

2 Answers

What colour are the power wires, are they green & yellow, black, black & grey, blue & grey, red & grey or black & green. I want to connect a cd/radio player but don't know what wires connect to the cd...

JVC KW-AVX800 The black wire is your ground The yellow is your positive 12v constant so connect this to the wire that has 12v when the car is off. The red connect this to the key switch wire meaning the wire will have a 12v signal only when the key is tured to the on position. The blue is for a power antenna the blue/white stripe is if you have external amps this wire goes to the amps remote on The orange/white stripe connect this wire to your cars dimmer switch Happy Wiring

Mar 21, 2009 | JVC KW-AVX800 CD Player

1 Answer


Did you try to adjust the contrct knob on the contoral pannel????

May 19, 2008 | Canon imageRUNNER C3200 Copier

1 Answer

Screen goes blank intermittently

Check to see if your constant(yellow) wire get a constant 12 to 14 volts. Goodluck.

Mar 05, 2008 | JVC KD-NX5000 Car Video Player

1 Answer

Jvc exad model kd-avx2

You'll have to connect the wire "parking brake" at the back of the JVC to your ground wire (black)!

Nov 08, 2007 | Car Audio & Video

1 Answer

JVC KD-AVX2 new installation will not power up

your set could have damage after powering it up and connecting speakers.have the tech repair it.good luck.

Apr 01, 2007 | JVC KD-AVX2 Car DVD Player

Not finding what you are looking for?
JVC KD-AVX2 Car DVD Player Logo

Related Topics:

245 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Car Audio & Video Experts


Level 3 Expert

102366 Answers

xxxxxx xxx

Level 3 Expert

4905 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a JVC Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides