Sharp al 1045 error h4 how to reset - Office Equipment & Supplies

SOURCE: My Sharp AL-1217 keeps flashing H4 and does not respond

This is a typical fuser lamp issue. This is usually caused by a fluctuation in current supplied to the fuser assembly when the copier is warming up.

This cannot be solved by powering off the unit nor by unplugging it!

Follow the simple steps below to correct the issue:

1. Power on the unit.
2. When the LED display starts flashing "H" and "4", Press C and Auto button(this is the leftmost button with the copier console facing you)
3. Repress the C and Auto Buttons again
4. Press the copies button until 14 appears on the LED.
5. Then Press the BIG Blue COPY button(the rightmost button with the copier console facing you)