- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This may happen due to double NAT issue....
the DSL modem might give an IP address in the range of belkin route....that is 192.168.2.X
check for the ip address when the computer is directly connected to the DSL modem...
now check for the IP adress when the Belkin alone is connected to the computer....
if they both give an IP adress like this 192.168.2.X......(X can be any value)
then you will face the above issue.....
in that case you can login to router and change the IP address of belkin router from 192.168.2.X to 192.168.15.X
this will resolve the issue
Most residential subscriber services use dynamic IP addressing. Dynamic IP addressing is automatic from your Internet Service Provider (ISP). Linksys home based products such as the one you have should be setup up for this configuration out of the box by default, and require no adjustments to the IP configuration of the wireless router. You should power down the DSL modem and Linksys, then connect them, then reapply power. This will clear the DSL modem if it was connected to another device such as a PC. This is important as most cable and DSL modems use something called MAC address binding that will only allow one device to connect to it directly at a time.
First you need to sign up with an Internet Service Provider than can provide a broadband connection wirh DSL (ADSL in Australia) or a cable connection together with a wireless router with a built-in DSL or cable modem. Alternately a wireless router plus a separate DSL or cable modem. The modem needs to be configured in accordance with the ISP's instructions. Then the Wireless router and the wireless card in the computer needs to be configured. Follow these steps:- 1. Connect the wireless router to your computer with a LAN cable. 2. Start your browser and enter the router's configuration URL IP address. 3. Enter the router setup, login and password 4. Change the admin password 5. Go to the wireless settings and change the default SSID and turn off SSID broadcast. 6. Setup encryption key the strongest is WPA2 (if not then WPA). 7. For further security measures - turn on MAC address filtering and enter the MAC address of the wireless cards on the computer/s you want to connect to this wireless router. 8. Record the settings you have made and keep it in a safe place and Save the settings. 9. Configure the wireless cards on the computer/s with the SSID and encryption settings of the router. 10. Remove the LAN cable between the router and the computer then the computers should be able to connect to the router. If you are not sure, then get a computer savy friend to help you.
type your ip adress into you web browser, this should take you to the configuration screen, there should be a tab that says security or something like that, select the type of security that you want, and it should assign you a wireless key automatically, hope this helps