Question about Al Agnew Al Ag 3 Piece Pocket Watch Collection

Open Question

Battery replacement The arms do not work

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have this seiko solar chronograph watch for one year and stop working, I tried to charge it with sun light with no success, any idea ?


Replace the battery, the solar part doesn't mean it charges from the sun it has to do with the movement of the arms (I'm not %100 what that means) I just know it doesn't charge by the sun or any other light source.

Jan 31, 2015 | Seiko Watches

1 Answer

I have a sonic terramax watch and everything work except the arms for time do not move. Anyone have an answer for me


This watch have two batteries. When you open tha back you'll see a big battery mounted on the printed circuit board (PCB). If you unscrew the screws from PCB and take it out, you'll find under it the mechanism with the battery from the analog watch. Replace that battery and "Have a good time"... :-)

Aug 10, 2012 | Watches

1 Answer

How do I change the battery in my Casio F-105


When I didn't see an answer, I tried it anyway since I already had the battery and little to lose. Undo the 4 small screws holding the back on (careful - don't drop them). Be careful to keep the small rubber gasket around the edge in its grooves. Do not take the workings out of the watch. There is a small silver arm running across the back over to a cream colored plastic piece with 3 grooves in it. Pieces of the arm are in the outer 2 grooves. Use something small to pry open the arm using the middle groove . Peel it back just a little and replace the battery. The watch should now be working. Snap the arm back in place, be sure the gasket is in place, put the back on,
and screw in the screws. Simple when it works.

Jun 19, 2011 | Casio Watches

4 Answers

Can I use an ordinary button cell in a seiko kinetic


I have been trained by a Master watch maker and I have worked on many Seiko Kinetic watches. Yes the original watches came with a capacitor that is charged by your arm movement. But unfortunately, they seem to only last a few years. All replacements are now done with a Lithium Ion battery that is much better and lasts longer than the original capacitor. This is the correct solution and don't try to use a battery type that is used in other quartz watches.

Oct 01, 2009 | Seiko Kinetic watch

1 Answer

Hi there i have bought a second hand tag heuer carrera tachymeter,i dont have a user manual,but cant seem to get the chronograph functions to work ?


Great watch! Operation should be pretty straight forward. The top button starts the chrono and stops it. The bottom button resets it. To calibrate the sweep arm into the right position pull the crown out to the first or second set position and press the start button until the sweep arm is in the start position you desire. This is typically 12:00 or 0.
If your chrono is not working then have the battery checked. If the battery has been recently replaced then make sure the watch doesn't need to be cleared.
I recommend you take this to a watch maker/technician who will be familiar with the service requirements of this model including resealing and pressure testing the watch to be sure it is sealed to its marked water resistance specifications.

Thanks!

Sep 20, 2009 | Tag Heuer Carrera Series Chronograph Watch

1 Answer

Emporio Armani AR0534, How do you reset the Chronograph function of this watch?


If it is not working you may need to "AC" the watch. This generally needs to be done when the battery is replaced. This will reset the circuit board and allow the watch to work correctly. There maybe instructions on the inside of the back lid to do this but i always recommend having a watch maker/technician doing it because of the delicate nature of the circuit board.

If the sweep arm is not resetting to the 0 position then you can set by....
pull the crown out to the first or second set position then press and hold down the start button until the sweep arm is in the position you want.

Sep 11, 2009 | Giorgio Armani Emporio Armani Classic...

2 Answers

Battery Replacement


Do not lay the tweezers across any contacts as you may damage the watch.
First you need to examine your watch movement and find an AC point (contact). Use an eyeglass, as the writings can be very tiny.
When found, touch an AC point with one arm of tweezers and battery+ with another arm simultaneously.
Some watches needs to do that twice, so, to be sure, do that twice.
If you are not comfortable with tweezers, you can use a thin wire, connecting one end of the wire to AC point and another to battery+.
Each shortcut should last for 3 seconds.

Do not forget to rate, please.

Feb 10, 2009 | Casio Twincept Databank ABX238BV Wrist...

1 Answer

Battery Replacement


Do not lay the tweezers across any contacts as you may damage the watch.
First you need to examine your watch movement and find an AC point (contact). It is embedded on movement. Use an eyeglass, as the writings can be very tiny.
When found, touch an AC point with one arm of tweezers and battery+ with another arm simultaneously.
Some watches needs to do that twice, so, to be sure, do that twice.
If you are not comfortable with tweezers, you can use a thin wire, connecting one end of the wire to AC point and another to battery+.
Each shortcut should last for 3 seconds.

Do not forget to rate, please.

Jan 27, 2009 | Casio Triple Sensor Pathfinder PRG60-1AV...

2 Answers

Adjust not working


i had this problem with mine after a battery replacement. If you open your watch, and look behind the offending button, you'll notice there is a small arm that should fit behind the button. the jeweler that destroyed my O-ring during a battery replacement also failed to line these arms up on one side of the unit. i had to find a REALLY small screw driver and finagle the arm back under the button... Now it's working perfectly... except the whole not waterproof any more part....

Hope this helps.

Mar 09, 2008 | Casio Sea-Pathfinder SPF40-1V Wrist Watch

2 Answers

TIME IS NOT THE SAME AS THE DIGITAL TIME


  • Push the middle (T) button.
  • Touch the screen in the center selecting the units mode (24 C m).
  • Push the middle (T) button again for 5 seconds.
  • "SYNCHro" will appear on the display.
  • Use (+) button for min arm and (-) for hour arm.
  • Bring the two hands pre-cisely to 12 o'clock.
  • Press the middle (T) button to validate the setting.

Oct 10, 2007 | Tissot T33.1.588.71 Wrist Watch

Not finding what you are looking for?
Watches Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Al Agnew Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18391 Answers

Jimmy Accardi

Level 2 Expert

101 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

Are you an Al Agnew Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...