Question about Danby DDR606 Dehumidifier
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Danby Dehumidifier
I dropped the water bucket by accident on the dehumidifier, and I have the same problem. Here what I found :
First, remove the water bucket and find the circuit diagram, it is very useful.
E1 code is related to the room humidity sensor, E2 code is related to the room temperature sensor and E3 code is related to the safety thermistor sensor. If you have one of these error code displayed, you will probably have to replace the sensor.
The humidity and temp sensors are located on the same board. To access it, remove the water bucket and you will see the 2 screws holding the front panel. Remove the screws, then gently prayed the front panel. Be careful, there is two plastic clip on the top of the panel and they are really easy to break. The board is located at the top right, under the cover. The safety thermistor is located on a pipe on the right side of the dehumidifier.
Posted on Jul 20, 2009
Tips for a great answer:
May 04, 2015 | Danby Dehumidifiers
May 15, 2012 | Danby Dehumidifiers
Aug 23, 2011 | Danby DDR7009REE Dehumidifier
Aug 03, 2011 | Danby DDR557 Dehumidifier
Jun 01, 2011 | Danby DDR583R Dehumidifier
Dec 02, 2010 | Danby Dehumidifier
Jun 27, 2010 | Danby DDR6009REE Dehumidifier
Apr 11, 2009 | Danby DHCC6020 Dehumidifier
Apr 11, 2008 | Danby DDR586R Dehumidifier - 58 Pints...
39 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: