Question about One For All URC-4330 Remote Control

1 Answer

Codes i need the code # for a jvc home theater dvd player.and a sylvania tv.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 129 Answers
Re: codes

Hello, follow this link to download the manual and the codes for your remotes:
just right click and save as on the download links.

if this does not work you can try the search method,
you do this by either holding down the device button eg: TV or if you have one the "magic" button for three seconds, a light should then flash twice to say you have done this correctly.
then press the keys 991 then the power button.
you must now press the channel up key (ch+) possibly upto 150 times while the remote cycles through every code.
Once your tv or device switches off stop pressing the ch+ key and press the power button to make sure it switches back on,
(if you press ch+ too many times you can go back by pressing ch-)
When complete press the magic or device key again to save the settings (light should flash twice to confirm)

Many thanks

Posted on Dec 21, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I would like to program an older Samsung tv to my JVC LP21036-038 Remote I need the codes?

Unfortunately, the JVC LP21036-038 remote can only control JVC devices. It doesn't have any adjustable codes. You can choose between 3 codes (A, B, and C) so that using 3 JVC video devices doesn't result in conflicts. This remote came with the JVC HR-XVC14BU among other devices. The manual for the VCR/DVD player is available from JVC support. The direct link to the manual is . See page 17 of the manual for the details.

I'd recommend you get a cheap universal remote to control the Samsung TV and the JVC vcr/dvd player.

I wish that I had better news for you.

Cindy Wells

Sep 13, 2014 | JVC Lp21036-038 Remote Control

2 Answers

Im looking for codes for a sylvania tv

The codes to try for Sylvania TVs are 0054 0030 0171.

The manual and codes are available from the One For All support site: . The link for codes is at the bottom right of the page.

However, most remotes are limited to codes for devices released 6 months or more before the remote was programmed. If your TV is newer than your remote, then you may need to get a newer remote.

I hope this helps.

Cindy Wells

Feb 25, 2011 | One For All URC-3021 Remote Control

1 Answer

Need codes for sylvania DVL-700F

Unfortunately, the code for the DVD player may not be available in the programming on the chip for this remote. The Sylvania DVD player was made by Funai but it was released in 2005. The URC-6131N was released in 2003. Any remote that is older than the device or is released less than 6 months after the device will not have the new model codes. There is a lag in the codes becoming available to the universal remote programmers.

Your options are a newer universal remote with the code for the Sylvania DVD player, try to program the DVD player remote to control your TV, or get a universal remote that can be programmed by a computer (USB port).

I wish that I could be of more help.

Cindy Wells
(for support see: . The company will give you a list of remotes that do support your device if you contact them.)

Oct 19, 2010 | Universal Remote Control URC-6131N Remote...

1 Answer

Need codes for sylvania tv and panasonic dvd player

These are the codes when using your Radio Shack 15-2147 3 in 1 remote control....for Sylvania TV: 0054, 0030, 0171, 1931 for Panasonic DVD: 0247, 0701 Hope this helps.

Nov 05, 2009 | Radio Shack (15-2147) Remote Control

2 Answers

URC-4021B00 codes

May 21, 2009 | One For All URC-4021 Remote Control

4 Answers

Remote codes for a jvc tv. allforone remote model urc3021b00

I have a samsung dvd and i dont know what code and how to programme it so I can operate my dvd.

Sep 14, 2008 | One For All URC-3021 Remote Control

3 Answers


CyberHome DVD 1024 1023 0816

Mar 02, 2008 | Remote Controls

1 Answer

Need dvd code

Do you happen to know the model# of your Sylvania DVD/VCR player? That will help me access the correct codes for your set. Let me know, thanks!

Sep 24, 2007 | Philips PM3S Remote Control

Not finding what you are looking for?
One For All URC-4330 Remote Control Logo

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top One For All Remote Controls Experts

The Knight
The Knight

Level 3 Expert

66623 Answers

Cindy Wells

Level 3 Expert

4722 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you an One For All Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides