Question about Samsung UN55ES6500 55 Inch 3D 1080p Smart TV LED LCD HDTV

1 Answer

Smart T.V Sumsung Got Stuck

The tv turns off after 15 minutes of use. then I unplug the power cord from the wall, wait for 5 minutes and reconect it again. I turned it on, watch it for another 15 minutes and then it suddenly turns off again. I disconect the cable from the wall plug wait for another 5 minutes and reconect again. Then I turn the TV on again, watch it for 15 minutes and suddenly it turns out again. and it goes on and on.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Samsung Master
  • 74,106 Answers

It sounds that your TVs' timer function is set to 'ON' for 15 minutes time. Check it, and make it 'Off'. Refer its user manual for details.

Posted on Jul 21, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canner Error 52 Hewlett Packard M1522nf


Hello,

Please try the below listed steps that should resolve the issue.

  1. While the printer is ON, unplug the power cord from back of the printer.
  2. Also unplug any other cables connected to it. ( USB / Telephone, LAN cable etc )
  3. Wait for 3 minutes.
  4. Plug in the Printer Power Cord directly to wall outlet and then to the printer.
  5. Printer should power ON automatically, else press the ON button to do so.
  6. Now try making a Copy. It should work.
  7. After which connect all the cables / cords that were unplugged.

Jun 24, 2014 | HEWLETT-PACKARD Hewlett Packard 53A...

1 Answer

My sumsung tv is stuck on mute


Unplug the power cord and wait 2-3 minutes. Plug back in.
That should reset it.
If not, what is the model number ?

Aug 24, 2013 | Televison & Video

1 Answer

Hp officejet 6500 all lights are flashing and mechine says turn off and on . Please can someone Help??


: Check the power cord

1.
Turn on the product.
2.
Remove the power cord from the back of the product.
3.
Check the power cord for any physical damage. If the power cord is damaged, replace the power cord.

*
If these steps resolved the issue , you do not need to continue troubleshooting.
*
If the issue persists , continue to the next solution.

Turn the product off and then on again

1.
Press the Power button ( ) to turn the product off.
2.
Wait 60 seconds, and then press the Power button ( ) to turn the product back on.
3.
If the product does not turn off when the Power button ( ) is pressed, wait three minutes, and then proceed to the next solution.

Plug the product into a wall outlet
Follow these steps to make sure the product is plugged in correctly.

1.
Unplug the power cord from the back of the product.
2.
Unplug the power cord from any surge protectors or power strips.
3.
Select a wall outlet to plug the product into. Test the wall outlet by plugging another electric appliance, such as a lamp, into the wall outlet and turning it on. Unplug the test appliance.
4.
Plug the power cord into the back of the product.
5.
Plug the power cord into the wall outlet.
6.
Press the Power button ( ) to turn the product on.

*
If these steps resolved the issue , you do not need to continue troubleshooting.
*
If the issue persists , continue to the next solution.

Solution six: Reset the product
Follow these steps to reset the printer.

1.
Unplug the power cord from the back of the product.
2.
Unplug the power cord from the wall outlet.
3.
Wait 10 seconds, and then plug the power cord back into the wall outlet.
4.
Plug the power cord into the back of the product.
NOTE: Many power cords have an LED light on the power module or on the end of the cord that plugs into the product. Make sure the LED light is lit and steady.
5.
Press the Power button ( ) to turn the product on.

*
If these steps resolved the issue , you do not need to continue troubleshooting.
*
If the issue persists , continue to the next solution.

6. Perform a partial reset of the product
  1. Disconnect the power cord from the product.
  2. Wait for 20 seconds.
  3. Press and hold # and 3 while reconnecting the power cord.
  4. When the product turns on, release both buttons.
  5. Try printing again.

IF still won't resolve it by following steps mentioned above then your printer needs replacement. Malfunctioning hardware.

Mar 28, 2011 | HP Officejet 6500 Wireless All-in-One...

2 Answers

My wii console wont turn on, its plugged and everything, we had a power outage earlier but now no red light comes on. Please help!


Unplug the wii power cord from the wall and the wii for 5 mins. to reset the brick on the power cord.

Nov 22, 2009 | Nintendo Wii Console

2 Answers

It will not turn on


Unplug the AC adapter from power cord wait 30 min and plug it again.If this not help you may need new AC adapter.

Oct 19, 2009 | Nintendo Wii Console

3 Answers

Wii power


Try the Wii "RESET". Here's how: 1. Unplug the Wii for at least 5 minutes. 2. Plug it back in.

Dec 11, 2008 | Nintendo Wii Console

1 Answer

Zvonko jelusic from belgrade


The print carriage is stuck.

Solution

  1. Open the top access door on the printer.
  2. Remove the print cartridges.
  3. Close the print cartridge flaps after removing the print cartridges.
  4. Turn the printer off and then on again.
  5. Replace the print cartridges.
  6. Close the top access door.
If the resume light continues to blink after the print cartridges are released,

OR

the print carriage is stuck or makes a grinding noise, follow these steps.

Solution

  1. Lift the top cover to the printer.
  2. Turn the printer off and then on again.
  3. Unplug the power cord from the back of the printer when the grinding noise starts. Unplug the power cord from the wall outlet.
  4. Move the print carriage towards the middle of the printer (this procedure may take a couple of tries to get the timing correct).
  5. Take out the print cartridges and close the top cover.
  6. Plug the power cord into the wall outlet. Plug the power cord into the back of the printer.
  7. Open the top cover, reinstall the print cartridges, and then close the top cover
Solution

  1. Open the top cover.
  2. Unplug the power cord from the back of the printer. Unplug the power cord from the wall outlet. Wait a minute or so.
  3. Plug the power cord into the back of the printer. Plug the power cord into the wall outlet

Sep 22, 2008 | HP DeskJet 5550 InkJet Printer

2 Answers

Tv turns off after 15 minutes of use


For bobby11 and luis, it is the power supply. Part Number EAY34797001 in the 42" and EAY34796801 in the 32". This is a known problem, and somebody should start a Class Action against LG over this one. Part is available online and easy to swap out for anyone with the most basic knowledge.

Jan 16, 2008 | LG 42LC7D-UB Television

Not finding what you are looking for?
Samsung UN55ES6500 55 Inch 3D 1080p Smart TV LED LCD HDTV Logo

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74106 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...