Question about Grilling

Open Question

Uniflame gbc772w grill heat shields where can I find them and a back wheel

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 4736 Answers

SOURCE: Uniflame GBC772W grill is having

More than likely, the problem is with your grills LP Gas Regulator. To test this theory, tune the tank valve OFF and disconnect the hose from the tank. Wait 5 minutes and reconnect the hose to the tank. Turn the tank valve ON VERY, VERY SLOWLY (Slow motion, slow) until the valve is fully open. Now, light the burner farthest from the tank first and turn it to the highest setting. Has the flame height returned to normal? If so, light the remaining burners the same way. Do all the flame heights, now look normal? If so, you solved the problem.

If not remove the burners from the grill and clean the properly, as well as the venturi valve (part of the burner, where the burner orifice enters the burner) on each burner. As spiders like to go into them and build a nest. After a thorough cleaning, reinstall the burners and try again.

If that still did not solve the problem, you need to replace the hose/regulator assembly. You can get one at any home center or hardware store that sells gas grills and accessories. Be sure to take you old one with you for comparison purposes.

Hope this helped you troubleshoot and solve the problem. Please let me know. Thanks and Happy Grilling!!

Posted on May 09, 2011

  • 4736 Answers

SOURCE: I am looking for replacement burners (4) for a

You don't see brass burners much any more, because of the iron content. However, stainless steel replacement burners are available for your model. Check them out at the link below.

http://www.clagrills.com/grillparts/uniflame/uniflame-grill-parts-home.htm


I hope this helps you and Happy Grilling!!

Posted on Jul 19, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a manual for this product.


Helloo there,
Well here are a few
http://outdoorcooking.manualsonline.com/manuals/mfg/uniflame/uniflame_gas_grill_product_list.html

You REALLY need to get the exact model number and search online for it or try here for a start to your quest
http://www.grill-parts.com/uniflame/models/uniflame-grills-main.htm

Sep 16, 2014 | Uniflame Grilling

1 Answer

I need a heat plate for my Grand Gourmet Gas Grill #HBT250 and can't find it. The suggested www.grillstuff.com doesn't list Grand Gourmet which was purchased at Meijer in 2006


Grand Gourmet grills usually take UniFlame replacement parts. You shouldn't have much trouble if you look around at UniFlame parts. good luck!

Jul 06, 2012 | Barbeques Galore Grilling

1 Answer

I need an owners manual foe uni-flame gold gass grill


I needn an owners manual for UniFlame Gas Grill # GBC772W
Seril # 0646005257 06-2011

Jul 05, 2012 | Uniflame Grilling

1 Answer

I am looking for replacement burners (4) for a uniflame grill model gbc772w-c. The original ones were brass.


You don't see brass burners much any more, because of the iron content. However, stainless steel replacement burners are available for your model. Check them out at the link below.

http://www.clagrills.com/grillparts/uniflame/uniflame-grill-parts-home.htm


I hope this helps you and Happy Grilling!!

Jul 19, 2011 | Grilling

1 Answer

Uniflame GBC772W grill is having some problems the burners do not seem to put out much gas to have a good flame on high i cleaned out the little burner holes but it seems like we don't get enough...


More than likely, the problem is with your grills LP Gas Regulator. To test this theory, tune the tank valve OFF and disconnect the hose from the tank. Wait 5 minutes and reconnect the hose to the tank. Turn the tank valve ON VERY, VERY SLOWLY (Slow motion, slow) until the valve is fully open. Now, light the burner farthest from the tank first and turn it to the highest setting. Has the flame height returned to normal? If so, light the remaining burners the same way. Do all the flame heights, now look normal? If so, you solved the problem.

If not remove the burners from the grill and clean the properly, as well as the venturi valve (part of the burner, where the burner orifice enters the burner) on each burner. As spiders like to go into them and build a nest. After a thorough cleaning, reinstall the burners and try again.

If that still did not solve the problem, you need to replace the hose/regulator assembly. You can get one at any home center or hardware store that sells gas grills and accessories. Be sure to take you old one with you for comparison purposes.

Hope this helped you troubleshoot and solve the problem. Please let me know. Thanks and Happy Grilling!!

May 09, 2011 | Grilling

1 Answer

Heat shield for model FG22O4C


This grill was discontinued over 6 years ago. There will come a point when spare parts are sold out.

Jun 24, 2008 | Uniflame FG2204C Grill

2 Answers

Uniflame grill


how do i reset the regulator

Oct 21, 2007 | Uniflame FG2204C Grill

Not finding what you are looking for?
Grilling Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Grilling Experts

paulcarew

Level 3 Expert

2458 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Are you a Grilling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...