Question about Radio Communications

Open Question

I have used my Delton X9 Bluetooth headset a few times with no problem, no it won't turn on. When I plug it in, there's a blue light that blinks once, then a short blink, then continuous blue light...when I unplug it goes dark. What do I do?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: headset disconnecting frequently

I think that the problem is with the on/off switch inside the headset boom. Mine has been doing the same thing lately. I'd like to find out how to fix it myself, cause I'm sure having it repaired would cost about as much as just buying a new or better headset.

Posted on Jul 04, 2007

Ad
boopleloo
  • 1 Answer

SOURCE: Connect trueblue bluetooth headset to Samsung Eternity cell phone

I had the same poroblem. I turned the phone off and then restarted it. That worked for me. Try to make a phone call and see if you can hear it on the Bluetooth.

Also... compliments of Best Buy Troubleshooting -

Bluetooth Troubleshooting: Phones & Headsets

Problem #1:
Headset and phone are turned on, but you don't hear anything in the headset, i.e., there is no dial tone.
Action #1: Make sure your phone is Bluetooth-capable. If it is not: A. Buy a new Bluetooth-capable phone. B. Purchase a Bluetooth adapter for your non-Bluetooth phone. The adapter will allow your phone to interact with a Bluetooth headset.

Problem #2:
It's a Bluetooth-capable phone and Bluetooth headset, both are turned on, but you still don't hear anything.
Action #2: Make sure your phone, headset, and, if necessary, adapter are fully charged before attempting to synch the Bluetooth connection between the two devices - in many cases a blinking blue light will indicate the headset is charged.

Problem #3:
Everything is charged, but still not working.
Action #3:Before two Bluetooth-enabled devices can communicate with each other, they need to be initially synched up to each other - also referred to as linking or pairing.
A. Find "Communications" or "Connections" on your phone's menu screen and explore within to locate "New" or "Bluetooth."
B. Push the main button on the headset until the light shines solid blue and is NOT blinking. C. Select Bluetooth on phone menu. Within Bluetooth you may need to select and highlight "Devices" or "Find Devices" (depending on where you are, there may be other Bluetooth devices available).
D. While the headset light is solid blue, open the Bluetooth link (or Find Devices) on your phone's menu screen and scroll through until you locate the headset you wish to synch up to. Your phone will automatically begin searching for Bluetooth devices within 30 feet of itself.
E. After a short period of time, your menu screen should say "connected" or "devices paired". Make sure you click or select the device name to finalize the connection. If you have successfully paired the two devices, you will hear a dial tone in the headset. Congratulations! You've joined the Bluetooth world.

Note: After a couple of minutes showing solid blue, the light on the headset will start blinking; you want to pair up the phone and headset while the light is still unblinking. This is important. If the light starts blinking before you can complete the connection, you will need to turn the headset off and on and start over.
Problem #4:
You've followed all the instructions in this guide, and your Bluetooth connection is still not functioning properly.
Action #4: Take out your manual and carefully reread the section on synching up Bluetooth devices. If you still can't get things properly connected, we suggest you call the manufacturer regarding this issue.
Motorola: 1-877-MOTO-BLU for troubleshooting, or www.hellomoto.com
Jabra: 1-800-327-2230 from 8 a.m. to 8 p.m. EST for technical support; or www.jabra.com

I hope this helps.

Posted on Dec 19, 2008

  • 25 Answers

SOURCE: Headset will not turn on

hello to you, ahh yes the wonderful world of moto, it sounds to me like your not letting it charge long enough, when you start the charge it will go red, than after a bit it will go yellow and when fully charged it will go to a real dark green.( some times up to 3 hours, no!! im not kidding,) it amazes me how long it takes. step 2. when you want to put it in discover mode press the call button in till it turns solid purple than pull the mike down real quick and it should stay purple at this point you have 30 seconds to pair that puppy. good luck and you will get used to it. hope you only have one. i have seven.

Posted on Jan 27, 2009

jmgldsmth
  • 1869 Answers

SOURCE: The Motorola H800 bluetooth headset doesn't charge or turn on. While charging it just displays blinking green light

open and, replace the rechargeable batteries

Posted on May 29, 2009

  • 1 Answer

SOURCE: wep170 won't turn on....when charging its blue and blinking

I have the same problem? some can help us ?

Posted on May 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Windows driver for delton x9


You don't need drivers for a bluetooth headset. You need a working bluetooth adapter in your computer (most laptops have it as standard, some desktops need an external one (USB dongle, and this comes with it's own drivers).
When you are sure that you have working bluetooth, you need to pair the headset with your computer.
You need to find the Bluetooth icon, looking like this:
25291430-ez0mnqvciqz4umt0gxp53x21-4-0.png
in your system tray (near the clock on the taskbar, may need to click the << icon to expand the hidden icons). Right-click it and choose Add/Pair device and proceed to pair your headset per it's manual.

Nov 20, 2014 | Delton X9 Thunder Behind-the-Head Stereo...

1 Answer

I have a samsung gusto sch-u365 and i want to pair it with the plantronics 240


In case you have never paired your headset to another phone before, just by turning it on, it should enter the pairing mode, denoted by its indicator light flashing alternately in red and blue. Otherwise, i.e. if it was paired to another phone before, press and hold the call control button until its indicator light flashes alternately in red and blue. Then, on your phone, press the left softkey and go to 'Menu > Settings > Bluetooth > Add New Device'. After a little while, your headset should appear on-screen. Using the directional key, select your headset and press 'Pair'. If a pairing code (or PIN, or passkey) is requested, enter '0000' (four zeros, without the quotes). If the pairing process is successful, your headset should enter the standby mode (blue light flashing every few seconds). There might be an indication on your phone screen that a bluetooth device is connected as well.

Hope it works for you.

By the way, in case any (or both) your headset and/or phone user guides happen to be missing, feel free to download them from here (headset) and/or here (phone).

Anyway, please, let me know if you need further informations.

Best regards,
Carlos

Jun 10, 2012 | Plantronics Explorer 240 Bluetooth Headset

1 Answer

Motorola hs850 bluetooth headset won't pair with g five mobile


How to place a Motorola HS 850 bluetooth headset into paring mode:

  1. Close the boom to turn the unit off.
  2. Hold down the call button until the blue light comes on.
  3. While holding down the call button, swing the boom open.
  4. (Now you can let go of the call button.)

The headset is now in pairing mode, and you can search for it using your phone. When it asks for a PIN, use 0000.

May 14, 2012 | Motorola Mobility HS850 Consumer Headset

1 Answer

I want to use my motorola H680 bluetooth on my new phone and it ask for a numerical pass key but I don't know it?


It is hardcoded to '0000' (four zeros). Well, when you turn it on for the first time, its indicator light should be steadily lit in blue, thus indicating it is in pairing mode. If it has been paired to another device before, make sure that that device's bluetooth radio is turned off. If the light is not steadily lit, turn your headset off, wait for some 10 seconds, and turn it on again. Anyway, whilst its light is steadily lit, make you phone's bluetooth application search for new devices. After a little while, your headset should appear on-screen. Select it and make it connect. If a pairing code (or PIN, or passkey) is requested, enter '0000' (four zeros). If the pairing process is successful, it should enter the stand-by mode (indicator light starts flashing in blue). You see, the pairing procedure between any two bluetooth enabled devices should be performed just once. All subsequent connections between them should be achieved just by bringing they within each other's range, with their bluetooth radios turned on. At most, a simple press on the headset's call button should do.

By the way, if your headset's user guide happens to be missing, feel free to download it from this location.

Please, let me know if I can help you any further.

Regards, Carlos

Jun 20, 2011 | Motorola Mobility H680 - Headset -...

2 Answers

Having issues syncing my Uniden BT112 Bluetooth to my BlackBerry Bold. I used this Bluetooth with another telephone and don't have any of the old packaging. I don't have a pin number. Help!


Please follow the correct instructions below to successfully pair your headset with the phone.Make sure that the headset is sufficiently charged before pairing.

Charge the battery
Before using your headset, charge the battery for at least 8 hours. Charging the battery completely (and keeping it charged) will help you get the longest possible talk and standby time out of the battery.

Pair the headset to your Bluetooth phone
Pairing is like "introducing" two Bluetooth devices and giving them permission to connect to each other. If you want to use the headset with more than one phone, you need to pair it with each phone separately. Once a phone and the headset are paired, they can connect automatically whenever they detect each other.
1. Make sure the headset is powered off and the power adapter is not connected (you can't use the headset while it's charging).
2. Press and hold Power until the LED flashes alternating red and blue. The headset is in pairing mode and should be visible to other Bluetooth devices.
3. On your phone, start a search for Bluetooth headsets or handsfree devices. (This process may take several seconds, and it will be different for each phone; see your phone's manual for detailed instructions.)
4. Your phone should discover a device called a BT108, BT108 headset, BT109, or BT109 headset, When your phone asks if you want to pair with this device, answer yes.
5. When your phone prompts you for a PIN code or password to pair with the BT108 or BT109 enter 0000.
6. When the headset is paired, the LED turns blue and flashes every 3 seconds. Your phone might display a confirmation message, also.
7. Your phone might ask if you want to change the headset's name; generally, you should only change the name if you have more than one BT108 or BT109 headset that you use with this phone.
Connecting to your phone
Most phones connect to the headset as soon as you pair it; if yours won't, turn the headset off and back on. If headset still won't connect, check your phone's owner's manual for additional Bluetooth information.
Once the headset is paired:
Whenever you turn the headset on, it will automatically try to connect to whatever device it was connected to last.
If the headset loses the connection (e.g., if your phone is out of range), it reconnects automatically. To manually reconnect, press Power.
If the headset goes more than 1 hour with no connection, it automatically turns off.

If you need further assistance please leave me a reply.Hope you are satisfied with my solution.Your valuable feedback would be appreciated.Thanks for choosing Fixya.

TinuAlbinAlex

Jun 15, 2011 | Uniden BT-108 Bluetooth Headset

2 Answers

How do I acitivate it


Charge your headset
Charge the headset's battery fully before using the headset for the first time.
1 Put the headset in the supplied charging case and close the cover.
2 Plug the travel adapter into the case's charging socket.

Put your headset in pairing mode
1 Ensure that the headset is off (see Turn headset on/off below).
2 Press and hold the Multi-Function button until the indicator light turns on in blue (approximately 8 seconds).

Turn on Bluetooth on your phone and pair with headset
1 Set your Bluetooth phone to discover the headset by following your phone's guide.
Typically, the steps involve going to the Settings, Connection, or Bluetooth menu on your phone and then selecting the option to discover Bluetooth devices. Your phone will find the Samsung WEP200
headset.
2 Select Samsung WEP200.
3 When the phone asks if you want to pair with it, confirm by selecting Yes or OK.
4 Enter the headset passkey or PIN, 0000.

Your phone and headset are now paired and ready to make and receive calls.
1 Place the headset over your ear.
2 On your phone, make a call to the number you want.
3 If your phone and headset are successfully paired, you will hear ringing on the headset

After you have successfully paired your phone and headset, you do not need to repeat these initial setup steps each time you use the headset.

To turn the headset on
Press and hold the Multi-Function button for4 seconds until you see 4 blue flashes on the indicator light, then release.You will hear a tone and see the indicator light flashes while the power is on.
To turn the headset off
Press and hold the Multi-Function button for 4 seconds until you see 2 blue flashes on the
indicator light, then release.You will hear series of 2 tones and see the indicator light stops flashing.
http://ars.samsung.com/customer/DownloadAnsTempl?AT_ID=70171&SEQ_NO=2

Jun 07, 2011 | Samsung Bluetooth?® WEP200 Headset...

1 Answer

MY VOYAGER PRO .. LIGHT FLASHES BLUE RED BLUE RED ... CAN'T TURN OFF, CAN'T RESET, CAN'T RE PARE


If you manually turn the headset off, make sure that it is by itself, no other phones in the area, no WiFi hotspots. Once this is done make sure that there is not a bluetooth already installed on the phone itself, if there is, delete it. Make sure that the headset has a full charge. Try the pairing again. If this still won't work, you can try Plantronics Tech service line 800-544-4660.

Here are two links that may be helpful:

Plantronics Voyager Plus User's Guide

Plantronics Voyager Plus Pairing Instructions

Good luck from Headsets Direct!

Jun 04, 2011 | Plantronics Voyager PRO Bluetooth Headset

1 Answer

How to pair phone to samsung bluetooth headset wep301? I do not have my user guide.


Bluetooth Headset

Pairing Instructions

1. When you turn on your Samsung Bluetooth

headset for the first time, it proceeds into pairing

mode immediately.

2. If you have paired the headset with other

Bluetooth devices, make sure that the headset

is off. Press and hold the Multi-Function button

until the blue indicator light stays solid blue after

blinking.

3. Set your Bluetooth phone to discover the headset

by following your phone's guide. Typically, the

steps involve going to a 'Setting', 'Connection',

or 'Bluetooth' menu on your phone and then

selecting the option to discover Bluetooth devices.

4. Your phone will find the Samsung headset and

ask if you want to pair with it. Confirm this by

pressing the Yes or OK key.

5. Enter a passkey or PIN, 0000 (4 zeros), then

press the Yes or OK key.

6. If pairing was successful, the indicator light will

flash in blue 10 times rapidly before going to

flashing every 3 seconds. If unsuccessful, the

light remains on, and you will need to re-attempt

pairing.

7. When you turn on your headset after pairing

with the phone, the headset is automatically

connected to the phone.

8. When you turn on your phone after pairing with

the headset, the phone is connected to the
headset by pressing the Multi-Function button.

Jun 01, 2011 | Samsung SGH-U600 Cellular Phone

1 Answer

My plantronics 220 won't turn off. The blue light won't turn off and I can't get it on or off.


Try letting the battery go completely dead on the headset and then recharge it. This should fix the problem.

Here is the link for the Plantronics 220 User's Guide.

Good luck from Headsets Direct!

May 09, 2011 | Plantronics Explorer 220 Bluetooth Headset...

Not finding what you are looking for?
Radio Communications Logo

Related Topics:

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1654 Answers

Brad Brown

Level 3 Expert

15618 Answers

Mike Charette

Level 3 Expert

1795 Answers

Are you a Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...