Question about Car Audio & Video

Open Question

Kdc-x915 security code

3051 and 1234 dont work i need more 4 digit codes to try

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

latino
  • 93 Answers

SOURCE: kenwood kdc-x915

this link should help u with the security code

http://inform3.kenwoodusa.com/manuals/KDCX915.pdf

and no u dont need an amp to have sound

Posted on Nov 13, 2007

rteemon
  • 578 Answers

SOURCE: Security code lost

if you did not add a code to unit just ignore that code say and push source and unit should come on all kenwood deck say that'

Posted on Oct 10, 2009

smarthome2
  • 1114 Answers

SOURCE: Just bought vehicle, kenwood KDC 722 stereo wont

You have to go to a Kenwood car audio dealer in your area. They will pull the unit and get the serial # off the deck, call Kenwood and get you the code. If you pull it yourself you can save a little $... If you don't have the manual, go to www.kenwoodusa.com type in your model # under support and you can download install manual as well as user manual for free. Depending on the vehicle, it could be very quick or take an hour or so to pull the unit, it all depends on the mount. Hope this helps

Posted on Dec 12, 2009

604Autosound
  • 162 Answers

SOURCE: what is the 4-digit security code for a kenwood

You will need to visit an Authorized Dealer or service center for that product to get the unlock code reset. You can find a dealer listing on their website, or call them.

Posted on Feb 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a kenwood car radio /cd my battery recently went and was replaced and the radio is now asking for a 4 digit code which i dont have .I have amanual but nothing is written in the back what can i do ?


You can enter a 4-digit security code which must be used when the unit is removed from the vehicle, or the constant power source is disconnected from the unit. When constant power is restored to the unit, the security code must be entered before the unit becomes operational.
If the code is lost or forgotten I am afraid the unit has to be re-coded by a Kenwood dealer.
Good luck with it.

Mar 26, 2011 | Kenwood KDC-MP342U Car CD Player

1 Answer

I just bought a 1994 bmw. I need a code to access my kenwood kdc-x679 excelon player. The previous owner doesn't know the code,


You can enter a 4-digit security code which must be used when the unit is removed from the vehicle, or the constant power source is disconnected from the unit. When constant power is restored to the unit, the security code must be entered before the unit becomes operational.
If the code is lost or forgotten I am afraid the unit has to go to a Kenwood dealer for re-coding.

Mar 26, 2011 | Kenwood eXcelon KDC-X679 CD Player

1 Answer

How do you put in the code for a kenwood kdc-4022 head unit


1:-Select SOURCE Select ALL OFF
2:-Press MENU for 1 second, When "menu" is displayed "security"/"SECURITY" is displayed
3:-Press the [<<] or [>>] for one second. When "ENTER" is displayed "CODE" is displayed
4:-Select the digits to enter by pressing [<<] or [>>] button.
5:-Select the security code numbers by pressing [am] or [fm] button.
Repeat steps 4 & 5 to complete the code.
7:- Confirm the code by pressing [>>] for at least 3 seconds
When "RE-ENTER" is displayed "CODE" is displayed.
Go through steps 4,5,6,&7 again to re-enter the code and "APPROVED" should now be displayed? The security code activates?
Press the re-set button and remove from power source Turn ON go through steps 4,5,6,&7 to enter CODE and "APPROVED"" should be displayed.
Crikey need a beer now, Happy tunes, have a good drive.
Regards, Dave

Mar 20, 2011 | Kenwood KDC-4022 CD Player

1 Answer

What is the 4-digit security code for a kenwood kdc-x889


You will need to visit an Authorized Dealer or service center for that product to get the unlock code reset. You can find a dealer listing on their website, or call them.

Jan 28, 2011 | Kenwood Excelon KDC-X889 CD Player

1 Answer

Security code lost


if you did not add a code to unit just ignore that code say and push source and unit should come on all kenwood deck say that'

Oct 09, 2009 | Kenwood KDC-422 CD Player

1 Answer

Went to prison for 2 yrs. got out .car battery wasw dead,charged it, started my car and my stereo is asking for a code.all my pa`per work is gone,along with most everything else i had.all i have right now...


The unit can be used.
When the Security Code function is activated, the code can't be
changed and the function can't be released.
Note, the Security Code can be set as the 4 digit number of your
choice.
1 Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2 Enter Menu mode
Press the [MENU] button for at least 1 second.
When "MENU" is displayed, "Security"/ "SECURITY" is displayed.
3 Enter Security Code mode
Press the [4] or [¢] button for at least 1 second.
When "ENTER" is displayed, "CODE" is displayed.
4 Select the digits to enter
Press the [4] or [¢] button.
5 Select the Security Code numbers
Press the [FM] or [AM] button.
6 Repeat steps 4 and 5, and complete the Security Code.
7 Confirm the Security Code
Press the [¢] button for at least 3 seconds.
When "RE-ENTER" is displayed, "CODE" is displayed.
8 Do the step 4 through 7 operation, and reenter the Security
Code.
"APPROVED" is displayed.
The Security Code function activates.
When the wrong Code is entered in steps 4 through 6, repeat from
step 4.
Press the Reset button and when it's removed from the
battery power source
1
Turn the power ON.
2 Do the step 4 through 7 operation, and enter the Security Code.
"APPROVED" is displayed.
The unit can be used.

IF ALL ELSE FAILS TRY THE RESET BUTTON...
HERE IS A LINK TO KENWOOD WITH THE OWNERS MANUAL FOR THE MODEL YOU HAVE.


OWNERS MANUAL:
http://www.kenwoodusa.com/UserFiles/File/Global/Consumer/Manuals/KDCX569.pdf

KENWOOD WEBSITE:
http://www.kenwoodusa.com/Support/

GOOD LUCK TO YOU!!

Jun 25, 2009 | Kenwood eXcelon KDC-X469 CD Player

1 Answer

I have the code put it in still not working dont no how to put it in


NOTE: IF YOU TRIED UNSUCCESSFULLY TO ENTER YOUR CODE YOU MAY BE PROHIBITED FROM ANOTHER ATTEMPT FOR UP TO 24 HOURS. See below--section C

A. Input Security Code:
  1. Enter Standby: Press the [SRC] button. Select the "ALL OFF" display.
  2. Enter Menu Mode: Press the [MENU] button for at least 1 second. When "MENU" is displayed, "Security"/"SECURITY" is displayed.
  3. Enter Security Code mode: Press the [|<<] or [>>|] button for at least 1 second. When "ENTER" is displayed, "CODE" is displayed.
  4. Select the digits to enter: Press Press the [|<<] or [>>|] button.
  5. Select the Security Code numbers: Press the [FM] or [AM] button.
  6. Repeat steps 4 and 5, and complete the Security Code.
  7. Confirm the Security Code: Press [>>|] button for at least 3 seconds. When "RE-ENTER" is displayed, "CODE" is displayed.
  8. Do the step 4 through 7 step operation, and reenter the security code. "Approved is displayed and the Security Function activates. However, if you enter a code different from your security code you have to start over from Step 4.
B. After Pressing the Reset button or when removed from power source.
  1. Turn the power ON.
  2. Do the step 4 through 7 operation, and reenter the security code. "APPROVED" is displayed.
C. If an incorrect code is input, "WAITING" is displayed and the input prohibited time shown below is generated. After the input prohibited times lapses, "CODE" is displayed, and input can be done.

1 Time = 0 minutes
2 Times = 5 minutes
3 Times = 1 hour
4 Times = 24 hours

Here's a link to the manual:
http://manuals.kenwood.novenaweb.info/languages/EN/support/manuals/KDC-MV6521~6021~5021%20(EN).pdf

Apr 23, 2009 | Kenwood KDC-5021 CD Player

1 Answer

Kenwood_kdc_mp232_cd_player


please i dont remember my 4 digit and i cantnot use my kenwood kdc-mp232 please send me a 4 digit

May 01, 2008 | Kenwood KDC-MP232 CD Player

1 Answer

Kenwood kdc-x915


this link should help u with the security code

http://inform3.kenwoodusa.com/manuals/KDCX915.pdf

and no u dont need an amp to have sound

Nov 12, 2007 | Car Audio & Video

1 Answer

I NEED THE DEFAULT SECURITY CODE FOR MY KDC-MP228.


Kenwood Stereos do not have 5 digit codes. They are only a 4 digit code.

Mar 27, 2007 | Kenwood KDC-MP228 CD Player

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4836 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

The Knight
The Knight

Level 3 Expert

73691 Answers

Are you a Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...