Question about Sylvania Televison & Video

1 Answer

Replace tv video card

The tv is no picture only sound

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Sylvania Master
  • 12,223 Answers

FOLLOW this steps and fix it. God bless you

Perform some basic troubleshooting steps that apply to all TVs. These include checking the "Mute" button to see if it has been pressed, examining the L/R balance to ensure sound is coming from both speakers and checking the cable connections to auxiliary components such as the stereo system (which controls external speakers).

    • 2
Double-check the audio output jacks if you are using an S-video connection (a single round perforated jack) or component video connection (a trio of green, blue and red jacks). Those jacks only run the video signal to the RCA TV. In order to get an audio signal, you'll need to connect red and white RCA cables to their respective jacks on the TV.


    3 Check the back of the TV for a switch labeled "Int/Ext." It controls the sound input on some RCA TVs. If you don't have any separate speakers, the switch should be set to "Int."
      • 4
    Activate the sound set-up feature by pushing the "Menu" button and scrolling to the sound bar. (This option can usually be found only on RCA flat-screen and projection screen TVs.) The sound bar allows you to set the sound from mono to stereo, activate the surround sound features, adjust the sound for headphone use, set volume levels and activate preset sound levels for movies, sports, concerts, video games and other specific sorts of programming. If any of these settings don't match the configuration of your home theater system, it may cause problems with the sound. If you're confused about the options, select any settings that read "Normal" or "Automatic." That should set the RCA TV to factory standard audio settings.
      • 5
    Press the "Menu" button and scroll to the "Set-Up" option, then go to "Preferences." You'll see a bar on the menu marked "Maximum Volume." You can use that to limit how loud the TV can get, which can cause problems if you don't know it's been set. Move the arrow on the bar to reset the maximum volume, then hold down the "OK" button on the remote to hear what that volume sounds like. You can then listen to the TV as normal.

    Posted on Jul 20, 2013

    1 Suggested Answer

    6ya6ya
    • 2 Answers

    SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

    Hi,
    a 6ya expert can help you resolve that issue over the phone in a minute or two.
    best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
    the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
    click here to download the app (for users in the US for now) and get all the help you need.
    goodluck!

    Posted on Jan 02, 2017

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    How to fix Samsung CS21C510CL CRT TV switch on but no picture and no sound only standby light blinking five times and then after few seconds it's starting again and again blinking and so on.


    hi .
    You can try replacing the power supply card and the video card .sometimes the power supply section has bad capacitors that need replacement .

    May 18, 2017 | Samsung Televison & Video

    1 Answer

    I have a 2010 rca tv model 4033 have sound but no picture just happened yesterday


    Back-light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
    http://electronicshelponline.blogspot.com/

    Oct 01, 2014 | Televison & Video

    2 Answers

    I can get picture with hdmi connected but no sound. Do i have to connect the optical digital audio cable from PC to TV to get sound? Actually the video and sound go to stereo receiver first, video passes...


    If your video card supports audio over hdmi in that case you need to find the s/pdif port on you motherboard and the port on your video card (usually right next to and sli or xfire bridge) then you can send the sound thru the hdmi. if not you will have to connect your optical audio cable or a 3.5mm audio out to rca left and right out to your receiver for audio. what video card and mother board are you using? if you know this i can tell you exactly where the ports are for the spdif cable to video card and mobo.

    Mar 15, 2011 | Computers & Internet

    1 Answer

    Exactly one day after warranty expired no picture could this be the video card failed ? if so can I replace it


    Is your television turning on? If not, try to plug it into another outlet to see if it does. If not, thats the power supply (unless you tripped a breaker of course). If there is neither sound nor a picture (try to see if you can see the channel change) even after trying another outlet. This is a power issue with the television itself.

    If you can hear sound but still no picture, take out the video card and unplug the tv. Wait about 2 minutes then plug in the tv and put the card back in.

    If it is turning on. Try to connect another device such as a dvd, vcr, speakers, etc. (make sure your on the proper input). You can locate the input by where you plug it in on the tv as it is labeled. If this does work, you will need to replace your video card.




    Nov 20, 2010 | Dell W2306C 23 in. HD-Ready LCD Television

    1 Answer

    Sound but no picture [WINDOW7}


    It is either a bad video driver or a bad video card. Sound has nothing to do with your video. Since a computer has a "sound card" and a driver for the sound card. I would reinstall your video driver. If you have access to another you can install the card there to see if you still have the same problem after you do a re-install of the "video driver". This should fix your problem. :)

    Sep 21, 2010 | MSI TVAnywhere Plus (TVANYWHEREPLUS) Video...

    1 Answer

    I have a problem in tv tuner card. I tv card


    i have a problem with my tv tuner card.i am using inter videowin dvr of philips make saa7130.prviously iued to us this on my windows xp,now i am using windows 7 and instaled this tv tune card.iam getting the picture but no sound please help to solve this[problem.

    Jan 25, 2010 | Philips SAA7130 TV Tuner/FM Radio/Video...

    1 Answer

    How can i watch movies from computer to my tv


    You probably need to get a composite video output card for your computer. Actually, I've seen many cards that have both a composite video output AND a DVI output port on 1 card. The DVI output will give you a noticeably sharper picture than composite video, but you need to check if your TV has a DVI or HDMI input. (If it was manufactured after 2000, it probably does.) If you TV was manufactured after 2006, it probably has 1 or more HDMI inputs instead of DVI. You can buy a DVI to HDMI converter cable. That takes care of the picture; to get sound to the TV, you will need to connect separate sound cables to your TV. Your computer needs to have a line-level output jack on it's sound card, and you will need to get an adapter cable (from Radio Shack) to convert the stereo mini-plug to 2 RCA type plugs to plug into your TV. And that should do it!

    Dec 17, 2009 | Mitsubishi WS-65513 65" Rear Projection...

    2 Answers

    HOW DO YOU HOOK UP TV TUNER ON THE COMPUTER TO


    your video card (not tv tuner) has to connect to your tv. you would then use your tv as your computer monitor. If you dont have all the proper connections to connect your video card in your pc to your tv, then you may have to use a different video card. It just depends on what tv and video card you have

    Oct 02, 2009 | Acer AX3810B3801A Aspire Mini PC Bundle...

    2 Answers

    SSD-tv-675 remote and sound problem in vista and xp


    installed the tv tuner card but not able to view the picture and sound

    Aug 06, 2009 | Philips SAA7130 TV Tuner/FM Radio/Video...

    Not finding what you are looking for?
    Televison & Video Logo

    Related Topics:

    79 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Sylvania Televison & Video Experts

    The Knight
    The Knight

    Level 3 Expert

    73691 Answers

    matt martin
    matt martin

    Level 3 Expert

    1208 Answers

    Computer Repairing
    Computer Repairing

    Level 3 Expert

    14641 Answers

    Are you a Sylvania Televison and Video Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...