Question about Xerox WorkCentre 7228 7235 7245 7328 7335 7345 Fuser Cartridge 008R13028
Follow this instruction: God bless you
Turn off the printer and unplug the power cord from the wall outlet. Wait at least one hour for the fuser assembly and other internal components to cool.
Open the back cover of the printer. Squeeze the two tabs located in the upper left corner of the back cover, then pull the cover off the printer body.
Push the two green tabs on the duplexer unit and pull the unit out of the printer. If your printer is not equipped with a duplexer, skip this step.
Remove the two screws on each end of the fuser. The screws are large enough to remove by hand. Grasp the orange tabs on the fuser and pull it straight out of the printer. Line up the new fuser and slide it into place on the track where you removed the old one.
Replace the screws on each end of the fuser. Turn the screws by hand until they are tight. Slide the duplexer unit back into place, pushing it into the slot until it locks in place.
Push the back cover back into place until it locks. Plug the power cord into the wall outlet and turn the power on to the printer.
Posted on Jul 20, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Nov 06, 2015 | Xerox Office Equipment & Supplies
Mar 16, 2013 | Xerox DocuColor 3535 Copier
Jan 14, 2011 | Xerox WorkCentre M-24 Color Copier
421 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: