Question about Microwave Ovens
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
it could be 1 of 3 things here 1 the coupling under the plate mat be warn or broken inside so the shaft of the motor maybe turning but not turning the plate take the plate out and put a cup of water in the unit and see if coupling moves without the plate if not thn see if you can remove the coupling and repeat the test if you can see the motor shaft moving thn u need a new coupling, if not thn you may need a new motor to test th motor you will need to turn the unit on it side remove the plate first on the underside on the unit round where motor is you will see a plate this will round or square you need to cut this away to expose the motor dont throw it away as you need to refit if after, it turns round and you screw it back on, when you have found the motor remove and replace it albeit the motor is powered by the pcb it is unlikely to be the pcb as the motor runs all the time so they do ware out also do look to see if your unit has a turn table switch off button on the controls or in the manual hope this helps and dont forget to unplug ur unit from the mains.
Posted on Oct 19, 2009
Tips for a great answer:
Sep 07, 2016 | Whirlpool Microwave Ovens
Jan 12, 2016 | Microwave Ovens
Feb 15, 2015 | Whirlpool Microwave Ovens
Jun 01, 2014 | Microwave Ovens
Oct 02, 2012 | Microwave Ovens
Oct 17, 2009 | Microwave Ovens
Oct 09, 2009 | Microwave Ovens
Apr 29, 2009 | Microwave Ovens
Sep 06, 2008 | Whirlpool MH7140XF Microwave Oven
Jul 01, 2008 | Whirlpool Microwave Ovens
64 people viewed this question
Usually answered in minutes!