Will my Behringer amp purchased in the USA work in Australia

Easy to do - just get a patch cord that has a stereo 1/8" plug on one end and two phono (RCA) plugs on the other end. Plug the phono plugs into the "Tape IN" jacks on the mixer and use the "Tape" volume to adjust the sound level. It's best to turn your laptop or tablet volume up to maximum, then adjust the volume on the mixer.

Can you post a good Photo of the Area

I would think that it can be run

power facto commsning circuit drawing

Here you go..

I posted your schematic on my temporary web files site; so,
download and save within the next two weeks cause it might go away..

http://ca.geocities.com/artiedc/PMX2000.pdf

Ed

well you need to update the firmware of your gps also call garmin customer support they are great tell them about the map, also the poor satelite cover might be because of your location or weather conditions

If the shaft broke, then you will have to replace the whole encoder for it. You cannot glue a shaft and expect it to hold.

yes you will find your jack in radio shack near you or nearest electronic store

You should be able to get a diagram from the company itself and the circuit board can either be purchased from the manufacturer itself or they can tell you who to call.

Here is the manufacturer's number
BEHRINGER USA BEHRINGER USA Inc.
18912 North Creek Parkway, Suite 200
Bothell, WA 98011
Tel.: +1 425 672 0816


you can also try their online support at
http://www.behringer.com/05_support/webform_support.cfm?lang=ENG
but I would just call them, it would be much easier

Let me know if you need any further help or if they couldn't help you and I will let you know who else might have what you need.

good luck

Hi aliciacarol,

The best place to go to get parts for Behringer parts I have found is straight to Behringer themselves, or an agent nearest to you. They are generally inexpensive to buy, and delivery are better than most. Steer your way to your nearest agent to you from the map . If you have any troubles, feel free to get back to me here. Good luck, thanks for using FixYa

regards
Graeme

Here you go: xg-2000: http://www.geminidj.com/disc._prod_manuals/AMPS/XG-2000/XG-2000.pdf PMX-3501: http://www.geminidj.com/disc._prod_manuals/MIXERS/PMX-3501/PMX-3501.pdf Hope this is what you want