Question about D-Link DI 514 Wireless Router (DI-514)

1 Answer

Can't cassess the configuration page ..

Can't assess the configuration page .. I typed my password not luck, tried "admin" or "all" as the password .. no luck again. I have pushed the re-set button, I thought that will reset router's configuration .. It didn't work ... any ideas ..

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Expert
  • 279 Answers
Re: can't cassess the configuration page ..

Have you tried leaving the password blank? This model defaults to a blank password. If it's been changed, I can't do much to help you.

Posted on Aug 28, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

Lost password for router

if this your own modem then connect through Ethernet port via a straight cable. most of linksys modems has configuration page IP is
1. type this in your web browser and go
2. login is required, enter admin,admin as username,password
3.if admin,admin does not work you may see it in the given manuals
4. once you ar in the config. page go to wireless settings, security.
5. you should be able to see "pre-shared key" if it is star hidden, you may type a new one and save configuration.

i will be happy to assist more if this donot solve your problem.

Aug 09, 2012 | Linksys WRT160N Wireless Router

3 Answers

I try put in web browser 19216811 i put the user and password but do not work What i do for show the configuration to router

Open a web browser. Type in the address bar. Username is admin Password is admin
Unless you changed your password to the router, in which case you will have to do a hard reset on the router to get all the defaults back. This means, more than likely you will have to setup anything that you had configured on the router before the reset.

Apr 13, 2011 | TP-LINK TPLink TDW8950ND 150Mbps Wireless...

2 Answers

I forgot my password and need help on how to retrieve it or change it.

There is a reset button on the back of the router; just use a paperclip to poke it. Then the default settings will be restored, and the username/password should both be admin

Mar 02, 2011 | Linksys WRT160N Wireless Router

2 Answers

Where can i find my configuration web page?

Open your browser and enter the Linksys configuration URL.
The default login = admin
the default PW = admin

To secure your wireless network from unauthorized access,please click on this link and follow my instructions :-

Feb 08, 2011 | Linksys Wireless-G WRT54G Router

1 Answer

Hi there. I want to configure my MSI RG54G3 for PPPOE. Could you please help?

You have to access the router page first. Try to use admin as username and admin as password. You can also try to put admin as username and leave blank for the password.
Once on the router's page, you will need to look for the setup wizard. For the connection type, make sure to select PPPoE and match the settings with your current ISP.
Good luck!

Jan 31, 2011 | MSI Wireless-G RG54G3 Router

1 Answer

I forgot my router's password (on the configuration page). How can I get back in ?

well you have to mention you router type first then it will be easy to help
any way in any router if you forget you password in a router the only methoed you have is to reset it which will eventually reset the configuration also
after reseting router will have the default username and password set by the manufacture (this will be locate in the router manual) before resetting you must make sure you can configure it again ok
just look behind the router for a small hole named reset while the router is on insert a pin in to the hole and prees and hold the button for 10 seconds (thime will depend on you router type 10s is a default value)
once you release the button you should see all light starting to light again
no you shold reffer to the manual to go the initial configuration page
defalt username/password might be admin/admin or admin/password oradmin/blank password
try it only if you know configuration settings
please rate solution ......bighelp

Apr 11, 2010 | Belkin My Essential (ME1004-R) Wireless...

2 Answers

Need to find existing WEP ID, do not want to reset my WEP ID

Flip over your ACTIONTEC and you would see there the default wep key. If you've had it personalized before, you have to open the configuration page of your modem and check for the wep key.

To go to the configuration page, open your internet explorer and type in on the address bar. that is the default address for your actiontec. type in your username and password when prompted. the usual default it ADMIN for username and PASSWORD (lowercase) for password. or you could also try ADMIN (uname)-ADMIN(pword).

click on the wireless settings icon and then click on basic security settings. scroll down on the middle of the page and you will see there your wep key.

if you are unable to open the configuration page because you forgot your username and password, you can reset your modem so that it the uname and password will go back to its factory default settings (admin/password). However, if you are using pppoe connection (authentication using username and password to connect to network) you can lose your connection and you would have to configure your router. so be careful not to press the reset button at the back.

Apr 19, 2009 | Actiontec (5GE583000-01) Router

2 Answers

Router configuration

you need to open the configuration page of the ADSL router and enter the configuration settings manually.

into your browser type >> username: admin >> password: admin

then in the setup page...enter the correct setting provided by your encapsulation...multiplexing..VPI / VCI them if you have to...then enter your username and password for your internet account (you need to contact your ISP also for this.)

if ever you still cant enter into routers setup can reset it to factory the back of the router...there is a small hole..(usually in red border).....

turn on router >> then push a stick into the hole (small stick enough for the hole) for about 5 secs...then try again >> username: admin >> passoword: admin

if you need further info...please post back. good luck

Feb 09, 2009 | D-Link DI 514 Wireless Router (DI-514)

1 Answer

Password not working

Do the following: on your computer open internet explorer, in the address window type the IP of the router "example" your router IP should be on the bottom of the router. If not click start/run, type ipconfig at the > the router ip is listed at "default gateway".once you get to the routers logon page enter one of the following: username "leave blank" – username " admin " -or- username "admin" - password 1234 –or- leave password field blank. once logged on the router you can make your configurations. BPCS

Dec 28, 2007 | D-Link DI 514 Wireless Router (DI-514)

Not finding what you are looking for?
D-Link DI 514 Wireless Router (DI-514) Logo

Related Topics:

283 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Routers Experts


Level 3 Expert

18259 Answers

 C. Dante
C. Dante

Level 3 Expert

623 Answers


Level 3 Expert

4329 Answers

Are you a D-Link Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides