Question about Dishwashers
At first it stopped working all lights would not come on then we unplugged it and plugged it back in and it worked fine, this happened 3 times and then it stopped working and the only ones that would work are the pots and pans button and cancel/rinse button so then we tried resetting the panel and it did not work just lit up all the control panel lights but nothing so we are stuck as to what we should do next
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Kenmore Dishwasher #15769
Try this solution first
Push the Hi-temp and then push the Sani-rinse. Go back and forth multiple times on these two buttons. I found that after a handfull of pushes that a "1" came up on the display. I continued to keep rotating the two buttons and then a "2" came up on the display and the dishwater started it's "drain" phase. I then hit cancel to clear and then I selected the cycle I wanted. The washer started up just as normal at this point.
Posted on Feb 16, 2008
did you hold the start/resume button for at least 3 seconds if this works the dishwasher will start ok but if there is a fault it will fail again best you contact your nearest service agent good luck
Posted on Apr 07, 2011
Tips for a great answer:
Jul 27, 2017 | The Computers & Internet
Sep 02, 2011 | Washing Machines
Feb 26, 2010 | Dishwashers
Dec 25, 2009 | Kenmore 16912 Built-in Dishwasher
Jul 13, 2009 | Dishwashers
Feb 17, 2009 | Kenmore 24 in. 15173 Stainless Steel...
Jul 25, 2007 | Kenmore 15762 Dishwasher
29 people viewed this question
Usually answered in minutes!