Question about Kenmore Oasis HE 27062 Top Load Washer

Open Question

I have a Kenmore Elite Oasis HE top loader, model number 110.27062604. It appears to be leaking out of the bottom. I tipped it over and removed the rotor and stator. There is a shaft going up to the drum that the rotor mounts to. It appears to be a sealed bearing it goes through. I have a splatter around the outside of the washer base that has an oily residue. Also a circular pattern on the floor that also appears to have an oily residue. I could not find any parts on searspartsdirect.com that looked like they would work. I assume there is a drum seal of some sort. What part would I need to fix this, and where can I get it? Also if I have to get to the part from the top, how do I disassemble it? Thanks. Ed

Posted by on

  •  Ed Mettler
    Ed Mettler Jul 18, 2013

    I disassembled the washer from the top and under the wash basket and going through the outer tub is a bearing that appears to have a seal around it. Almost looks like an O-Ring, but attached to the bearing. I found a parts diagram on SearsPartsDirect but it does not show the shaft the motor drives, nor the bearing or seal at the bottom of the outer tank. Anyone know if this seal is probably the problem and where I can get one? Maybe it's not a replacable part. How do you remove it from the outer tub? Is it driven out from the bottom?

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

the dr
  • 447 Answers

SOURCE: Tub seal has rip therefore washer is leaking.

Its pretty comlicated requires dissasembly of the front of the washer. A good tech can do in 1 hour. You may want to pay for it rather than spending all day and possibly damaging something. Let me know if you need further assistance.

Posted on Jan 24, 2008

  • 1 Answer

SOURCE: torn seaL ON KENMORE ELITE WASHER

i have a kenmore elite washer the red lite is lit on controlles locked how do i solve this

Posted on Mar 23, 2009

  • 46 Answers

SOURCE: kenmore series 70 tip loader washer is leaking

your just seeing the water that is leaking dureing the wash cycle unplug washer there will be 2 screws on the header panel 1 on each side take them outgently pull header panel to you then flipupunplug wiring harness thas to the cabnet there will be 2 clips 1 on each sideuse a flat screwdrive and pry back they will come out tip cabnet back to you the whole thig will come off look at the pump in the front it has a weep hole in it see if it has been leaking from there

Posted on Jun 27, 2009

  • 497 Answers

SOURCE: need to replace seal on transmission on kenmore 41793802200

If you have no transmission experience DO NOT DO IT YOURSELF. lots of parts inside and one tiny little misplacement of a gear and you can ruin the entire thing. have an experience techincian come out and replace it for you.

Posted on Aug 28, 2009

  • 7 Answers

SOURCE: my kenmore elite oasis washer will not turn on. I

its the power button its a common prob use a soldering iron and switch it with the load sinal button this happpens as the washer alallows moisture to get on the board as its not protected it will save u a ton of money and anyone can do it

Posted on Dec 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My kenmore elite washer model # 110.24082200 is leaking from bottom. No visible leak from back panel acces...


my kemore whasing machine model10010 .25864400is not drain all c los left sam wather in dram and sound of water pamp like cenot turne tenks Bruno

Aug 21, 2011 | Kenmore Elite Oasis 27052 Top Load Washer

2 Answers

My Kenmore Elite Oasis washer unbalanced signal seems to be very sensitive. Only after several tries of readjusting the load to get it really even that the washer will spin without stopping. I made sure...


If the washer throws an UL error code with out any clothes in the washer then the issue must be concerned with the mechanical alignment inside the machine or a bad CCU.

The most common problem which can cause this is some sort of mechanical hinderance which does not allow the basket to move freely.

The suspension system which holds the basket in its place might be faulty and causing the unbalancing. In this model i think there are plastic ring at the bottom of the basket . Even if they are worn out or moved out of position it may cause the UL error code you are facing

Nov 09, 2010 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Kenmore elite oasis top loader 27062


See the following Whirlpool / Kenmore service manual for the Whirlpool Cabrio washer. The Kenmore Oasis is basically the same.



https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/409753510a90c8be852571e90073421b/$FILE/8178583.pdf


Also see the Sears Parts site for your washer.

Enter the full (###.########) model number and you should see descriptions of the major components and parts lists.


May 04, 2010 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

How to remove casing from kenmore elite top loader screws are in the rear of washer


Here's a link to a video on opening a Whirlpool Cabrio which is the same as the Oasis which is just a Sears branded version of the same washer.
http://s160.photobucket.com/albums/t200/Zenzoidman/Washers/?action=view&current=cabrio-fixitnow.flv

Apr 30, 2010 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Why is my kenmore elite (top loader) oasis washer HE is displaying a code of HC


The water inlet hoses are probably removed and reconnected in reverse, and then trigger the HC error code to flash indicating the hot and cold water inlet hoses are reversed. Reconnect the water inlet hoses properly and start a cycle then let us know what happens next.

Apr 18, 2010 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

KENMORE WASHING,wATER IS LEAKING FROM THE BOTTOM NOT THE HOSES


Possible circulation or drain pump leaking or associated hoses. See page 11 Oasis Tech Sheet

Jan 25, 2010 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Water leaking from bottom ofoasis top loading machine


you may not be leaking out the bottom. Your stand pipe may be clogged. If the stand pipe has a slight clog in it, the stand pipe will over flow, and the water "looks" as if its leaking from the bottom... These pump faster than your old machine, so the pipe will back up faster... hope that helps

Jul 31, 2009 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Front leak on kenmore elite


There is probably a small leak in the pump. The impeller rides freely inside its housing and has been known to wear through and leak.

It is part number 22 in this exploded view from Sears website under the parts direct tab. see link.

http://www.searspartsdirect.com/partsdirect/getSubComp.pd?modelNumber=11015962401&productCategoryId=0153200&brandId=0583&modelName=RESIDENTIAL-WASHER&diagramPageId=00005&componentDescription=BRAKE, CLUTCH, GEARCASE, MOTOR AND PUMP PARTS&documentId=K0407007&backToLink=Return to Sub Components list

Jul 19, 2009 | Kenmore Elite Oasis 27052 Top Load Washer

3 Answers

Kenmore elite top loader how do I get the case off?


Hi, Get me a model # and I can assist you with fixing this issue.

Vic

Jun 28, 2009 | Kenmore Elite Oasis 27052 Top Load Washer

Not finding what you are looking for?

Open Questions:

See all Kenmore Oasis HE 27062 Top Load Washer Questions

Kenmore Oasis HE 27062 Top Load Washer Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

fordexpert

Level 3 Expert

5481 Answers

Mike Squire

Level 2 Expert

391 Answers

Robert Rankin

Level 2 Expert

338 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...