Question about Panasonic PT-53TW53 53" Rear Projection HDTV-Ready Television

3 Answers

How to adjust picture on projection tv

Picture in the middle of screen is smaller than the the the right and left side of the screen how do you ajust this problem ?

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: how to adjust picture on projection tv

--to fix the color go to MENU then to SCREEN..ADJUST POJECTION ON TV..ADVANCED CONVERGENCE and adjust the grid to line up with one another using the volume and channel buttons. Combined the green and red lines to create a yellow line. Hit INFO to change to the blue lines and line the blue up with the yellow. Save changes and it should help the adjustment and color some.. After that go back to the MENU and adjust the basic colors (Contrast, Brightness, etc.)

Posted on Mar 11, 2010

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers
Re: how to adjust picture on projection tv

I have a 52" rca projection , and the screen looks like this ") (" on the sides can i do something to straiten it back out?

Posted on Oct 04, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert that has over 500 points.


    An expert who has answered 200 questions.

  • Expert
  • 375 Answers
Re: how to adjust picture on projection tv

Convergence alignment

Posted on Oct 28, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I try to ajust the green convergence on reference mark down ,and i can't move this line to left or right. how i can ajust the lamp to the righ or left. thank you

Ur tv 100% have a problems known as a convergence picture peoblems.The tv convergence board it is dead,if any of the colors lines R,G,B mis alignments and u will not able to auto or manually to adjust any of the R,G,B colors lines to alignments any of them up.The tv convergence board must be replace like 2 STK convergence ICS and some or all of it resistors too.To fixed the tv convergence board to solved the tv convergence picture problems.The tvs shops will cost u like $300-350 for parts and labors.

May 29, 2011 | Panasonic PT-47WX51 47" Rear Projection...

1 Answer


Does that set have whats called a color wheel, if so that maybe you problem, and replacement is how you fix it.

Apr 30, 2010 | Toshiba TP43H95 43" Rear Projection...

1 Answer

Color blue will not adjust on crt color conergence adjustment , picture on tv is double with blue on right side, auto/manual mode , the color blue will not adjust on right or middle side from side to side,...

This is a convergence output IC problem. convergence board would have to be removed - remove and replace 2 STK IC's and check the surrounding resistors. Shops usually charge between $200-$300

Sep 27, 2009 | JVC AV-56WP74 56" Rear Projection...

1 Answer

My Sony Projection TV middle of the screen curves down on top and curves up on bottom. Picture looks dubble like 3D, screen looks like concaved. Left side of the screen color is light green and blue, right...

This is a very common failure on Projection sets. Its called a convergence problem.
You may have one or more of the following symptoms.
Screen looks 3D
Colors don't line up
One or more colors can't be adjusted when using the convergence menu.
Screen is bowed or warped.
No Audio / No Video - Makes Chirping Sounds
You can see some examples and find a fix here...

Sep 26, 2009 | Sony KP-51WS510 51" Rear Projection...

1 Answer

Red & Green outlines but only on left/center portion of screen.

Its a convergence problem. You may want to check the site Every thing they said every description was right on. The best money I ever spent and the confidence you get from doing it yourself, Its a great feeling of achievement not to forget the live messenger support is instantaneous, friendly and informative if you need to fix your tv go to I fixed a philips 60 inch tv in 45 minutes, The convergecne chips were bad thanks a million. You guys saved me 250.00 bucks. I'll be recommending you to everyone I know!

Aug 18, 2009 | Sony KP-46WT500 46" Rear Projection...

1 Answer

One side of blurryness

now one thing at a time. the picture that is blurr does it have red or blue lines on the rt or lt side it sounds like the convergence is out on the unit and that will cause the picture to be blurry. and is the big screen in warranty please let me know marty

Oct 09, 2008 | Panasonic PT-51HX41 51" Rear Projection...

1 Answer

Toshiba 43A9UE convergence problem

Check the resistors right next to the Convergence ICs often 1 or 2 of them go oen when the ICs fail.

Feb 09, 2008 | Projection Televisions

1 Answer

Red Convergence on JVC AV- 65WP74

convergence amp ic bad
Sony Convergence

Jan 28, 2008 | JVC AV-65WP74 Rear Projection Television

Not finding what you are looking for?
Panasonic PT-53TW53 53" Rear Projection HDTV-Ready Television Logo

5,682 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

Josh Whitehead
Josh Whitehead

Level 3 Expert

1142 Answers

The Knight
The Knight

Level 3 Expert

66623 Answers

Are you a Panasonic Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides