Question about Canon PIXMA MP130 All-In-One InkJet Printer

1 Answer

Installation managed to uninstall the printer programme from lap top by mistake. cannot reinstall as the lap top no longer recognises the cd rom that came with the printer. any other way of reinstalling please? thanks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 53 Answers
Re: installation

Hi Try to update the driver from Device Menager. If you need more help contact me. Good Luck.

Posted on Aug 28, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

My printer does not appear in my computer


May you remove or uninstall by mistake that's way is not showing now don't install again to follow the mention below instruction.

1) Plug on you USB cable to PC and power on the printer.
2) Put the Lexmark printer software installation CD in you computer CD-Rom.
3) Open the CD-Rom, and duble click the setup exe.
4) The setup will take few minute to install the driver.
5) After installing the driver reboot your computer. and start to printing


Aug 03, 2011 | Lexmark X4650 InkJet Printer

1 Answer

My pc wont recognise my printer usb connection

Go to the device manager ... uninstall all the USB entries. Disconnect your printer. Reboot your computer. Reinstall your printer according to the manufacturer instructions (normally, insert the CD and follow the prompts. If you dont have the CD, get the driver from the manufacturer web site. You dont list the manufacturer so I cannot give you a link).

Thanks for your interest in

Sep 22, 2010 | Printers & Copiers

1 Answer

I can't set up my printer to my lap top with windows xp

Are you able to set it up on another machine? If so, and it works ok, then you are looking at the laptop not having the appropriate drivers installed. Install it from the cd. If the software seems to be installed, does the laptop not recognize the printer when you turn the printer on with it plugged into the usb port? Could be bad port or the USB port manager needs to be reinstalled.

May 14, 2010 | HP DeskJet 810c InkJet Printer

1 Answer

When I install the D7260 printer using the CD-Rom supplied it works fine. Then after a few days only the top two or three lines of the first page are printed and, after a long pause, the sheet comes out....

Many issues are caused when the HP Photosmart is connected to computer using a USB cable before the HP Photosmart software is installed on the computer. IF you connected the HP Photo smart to your computer before the software installation screen prompts you to do so, you must follow these steps.

Troubleshooting common setup issues :
1) Discoonect the USB cable from the computer.
2) Uninstall the software (if you have already installed it.)
3) Restart you computer.
4) Turn off the HP Photosmartm wait one minute then turn it on.
5) Reinstall the HP Photosmart software.

If your installation is incomplete, or if you connected the USB cable to the computer before prompted by the software installation screen, you might need to uninstall and reinstall the software. Do not simply delete the Hp Photosmart application files from your computer. Make sure to remove them properly using the uninstall utility provided when you installed the software that came with the HP Photosmart.

To uninstall from a Window computer and then reinstall
1) On the Windows taskbar, click Start, Settings, Control Panel (or just Control Panel).
2) Double-click Add/Remove Programs (or click Uninstall a program).
3) Select HP Photosmart Driver Software, and then click Change/ Remove.
Follow the onscreen instructions.
4) Disconnect the HP Photosmart from your computer.
5) Restart your computer.
Note : It is important to that you disconnect the HP Photosmart before restaring your computer. Do not connect the HP Photosmart to your computer untill after you have reinstalled the software.
6) Insert the HP Photosmart CD-ROM into your computer's CD-ROM drive and then start the Setup program,
7) Follow the onscreen instructions and the instructions provided in the Setup Guide that came with the HP Photosmart.

Nov 09, 2009 | HP Photosmart D7260 Printer

2 Answers

My scanner is not working. Can't open HP director on my laptop. I tried to reinstall CD that came with it, but " more recent version installed" Printer and copier work fine.

Here are some diagnostics.
1. Go to control Panel and then to scanners & camera.
2. look for your scanner there.
3. if you find your scanner there try to scan from the wizard and you will be able to scan you docs.

To Reinstall the Hp Director....
1. first uninstall the HP director software using the removal utility located in your cd...

The uninstaller on the Internet is newer and works better than the one on the CD-ROM. Use this method only if the Internet version is not available. Follow the steps below to use the CD-ROM version only if you cannot get the regular uninstall to work correctly and cannot access the Internet:
  1. Leave the USB cable disconnected from the all-in-one.
  2. Insert the all-in-one CD-ROM into the computer. Cancel or close any installation windows that appear.
  3. Right-click the Start button, and then click Explore . This will open Windows Explorer.
  4. In the pane on the left, locate the CD-ROM drive letter that contains the all-in-one CD-ROM.
  5. There are two different versions of the software for some of these models. Use the file path that pertains to your version of the all-in-one software.
    • Early versions of the HP Officejet 6100 and PSC 2100 and 2200 series: Double-click the file hposcr01.exe , located in the Drivers\Uninst\language (ENU for English, ESN for Spanish, FRA for French, or PTB for Portuguese) folder of the CD-ROM.
    • The newer software version: Double-click the file Cleanall.bat , which is located in the Util\CCC\Cleanup folder of the CD-ROM.
Let me know for any further help....

Sep 08, 2009 | HP PSC 2410 All-In-One InkJet Printer

1 Answer

Problems installing my printer

From Canon download page download driver for your OS and install it.
Download and follow instructions in user manual too

Feb 22, 2009 | Canon SmartBase MP730 All-In-One InkJet...

2 Answers


here try this ok?
richard from chicago and let me know if it works for you ?
richard from chicago

Issue After installing the all-in-one and restarting the computer, the following Generic Host Process for Win32 Services error message displays: Windows has shut down a process for Win32 services: Data Execution Prevention - Microsoft Windows To help protect your computer, Windows has closed this program. Solutions The following solutions should be tried in the order they are presented. If the first solution does not correct the issue, proceed to the next solution; if that solution does not correct the issue, proceed to the last solution. Solution one Uninstall and then reinstall the software using the following procedure:
  1. Uninstall the software by inserting the software CD that came with unit into the CD-ROM drive on the computer. NOTE: If the startup screen does not appear, double-click the My Computer icon, then double-click the CD-ROM icon where the all-in-one disc is inserted. Choose the Uninstall option. If the Uninstall option does not display, the software is not completely installed. Proceed to step 2.
  2. Install the software by inserting the software CD that came with unit into the CD-ROM drive on the computer. NOTE: If the startup screen does not appear, double-click the My Computer icon, and then double-click the CD-ROM icon, where the all-in-one disc is inserted. Choose the Install option.
  3. Run the Software Update from the HP Director and apply all patches.
Solution two
  1. Uninstall the all-in-one software using the CD that came with the unit, by following the steps in Solution one above.
  2. After the software is uninstalled, restart the computer.
  3. Install the all-in-one software by following the steps in Solution 1 above. After installation is complete, verify that the unit works correctly.
  4. Change the Windows Image Acquisition (WIA) service from Automatic to Manual by performing the following steps:
    1. Right-click My Computer , then select Manage . The Computer Management window opens.
    2. in the Computer Management window, click the plus ( + ) sign next to Services and Applications .
    3. In the list below Services and Applications , select Services .
    4. In the right-hand side of the window, right-click Windows Image Acquisition .
    5. Select Properties .
    6. Change Startup Type to Manual .
    7. Click OK .
    8. Close the Computer Management window.
  5. Add hpqtra08.exe to the Windows Firewall Exception list by performing the following steps:
    1. Click Start , then Control Panel . (Click Start , Settings , then Control Panel if you are in Classic Start menu mode).
    2. Click Security Center .
    3. Scroll to the bottom of the new window.
    4. Click Windows Firewall .
    5. Click the Exceptions tab.
    6. Click Add Program .
    7. Click Browse .
    8. Select C:\Program Files\HP\Digital Imaging\bin\hpqtra08.exe .
    9. Click OK .
    10. Click OK .
    11. Close all open windows.
    12. Restart the computer and verify that the unit works correctly.

Jun 12, 2007 | HP Officejet 5510 All-In-One Thermal...

1 Answer

Lexmark 2300

Did you run the lexmark cartridge replacement programme to say that the cartridge is not a new one?. this should be in your programme list when you installed the printer driver.

Feb 22, 2007 | Lexmark X2350 All-In-One InkJet Printer

Not finding what you are looking for?
Canon PIXMA MP130 All-In-One InkJet Printer Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts


Level 3 Expert

94039 Answers

old marine
old marine

Level 3 Expert

1301 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides