Question about Sewing Machines
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: skip stitch
The three most obvious causes (other than that of the machine possibly being slightly out of time) are:
1) Too small of a needle size - increase the size.
2) A needle that has a flaw / defect - change the needle.
3) Needle not inserted correctly, either not pushed all the way up into the needle bar, or not installed facing the correct place. On this machine, the small "scarf" in the needle (an indent just above the eye) shouldface the right side of the machine.
Posted on May 07, 2009
Go to brother.com . From there you will need to enter the model number and serial number to get the file for free good luck
Posted on Jun 01, 2009
I just bought the same machine and mine came with a photocopied manual. There is indeed a bobbin winder on the side, there's a flat section on the side of the bobbin winder closest to you, if you push that forward it connects a wheel attached to a bobbin spoke, to the belt that runs between the machine and the motor. To wind the bobbin, put the bobbin on sideways onto the axis of the wheel that is on the inside of the machine, and push the bobbin winder forward.
Posted on Aug 06, 2010
Tips for a great answer:
May 23, 2017 | Sewing Machines
Apr 24, 2017 | Sewing Machines
Apr 03, 2016 | Sewing Machines
Jun 11, 2015 | Sewing Machines
Mar 24, 2014 | Sewing Machines
Mar 21, 2014 | Sewing Machines
Oct 28, 2010 | Juki DDL-8700
Mar 08, 2009 | Juki DDL-8300
14 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: