Daryl shower door wheels - Home

videos that may help. It is normally the frame on the glass going out of square, rather than a hinge issue.

https://www.google.com/search?q=Daryl+710+shower+door

..

If there's a small hole in the front of the door anywhere, push a paperclip in there to release the door.

most shower doors are held in by the rollers some are adjustable if yours arent check to see if the spring is still holding wheels out firm if not spring probably broke

Hi,
amazon is one of the best places for purchasing your shower door rollers. Click here Amazon com shower door rollers and choose the best one (many of them are compatible with maax shower door), but anyway, before order something contact the seller to be sure. There's a plenty of rollers, so take a look.
I hope this was helpful.
enjoy

A hardware store will have replacements, if not go to Maax website and order there, replace them all.

It's usually best to take the OUTSIDE door off in that case; and start from the INSIDE, then do the OUTSIDE. The track wheels MAY be reversed on IN/OUT, so watch how they hang in the track. When everything is off, it's a great time to scrub out all the "yuck" that grows down in there. Once that's all cleaned out, rehang the INSIDE door and get it going smoothly, then the OUTSIDE door. You're all set then.

Go to the manufacturers and request a repair/spares kit for the door. Usually comes with all the fixings including the wheels & screws

You can get these at ace hardware or most hardware shops will carry them just take a sample to match it with yours.

curved cut glass will not always be the exact dimensions though they may look identical there should be several set screws on both the door glass frame and the shower glass frame that can be loosened and reset to make the door fit and close and open more properly without seeing the showwer itself i can not tell you exactly where they are but they should be either visible or behind a facade piece of metal frame