Question about Microsoft Windows 7 Professional for PC

1 Answer

Cannot connect to networked computer: Error - "not enough storage space to process this command"

I work for a printing company and we are having issues with computers connecting to 1 specific computer. I will list the computers on the network and what they do followed w/ additional details: 1) Windows Server 2003 - FTP Server 2) Windows 7 Pro (64) - customer file storage / printing station 3) Windows 7 Pro (64) - Pre-Press/Design 4) Windows 7 Home Premium (64) - Pre-Press/Design 5) Windows 7 Pro (64) - Marketing 6) Windows Vista Home Premium (64) - Customer Service 7) Windows 7 Pro (64) - Account Management 8) Windows XP Home (32) - Finance The problem we are having is computers 3-7 (and maybe 8) will get an error message "not enough storage space to process this command" or sometime "unable to connect" when trying to access shared folders on computer 2. The only computers we are worried about connecting to this shared drive are the ones operating Windows 7, so the issue shouldn't be related to OS compatibility. The computer the files are stored on is also used to print from (faster load times). I've followed some instructions for adding IRPStackSize to the reg but it only works for a limited time (and for all I know just restarting the computer fixed it and increasing the IRPStackSize didn't). Increasing the IRPStackSize also seemed to make the program the printer uses to react slower. This morning I made the decimal 45 and we haven't had the problem again yet, but I'm hoping there's a better solution.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 131 Answers

Okay, first a bit of "techie" information. When you print you send a file to the "print spooler" on the system handling the printing. In your case, that is Workstation 2. That file can be quite large and if there are several sent at once it can take up a lot of room. Once the system finishes printing it then clears out that space on the hard drive. Second, because you also use that for a file storage it may be that a lot of files are stored on that system either permanently or temporarily. So....the answer is that you are probably temporarily running out of disk space.

The reason you IRPStackSize increase worked is that you set aside more space for that stack so the system could hand incoming data more easily ...which meant it could sometimes delay a disk write enough to avoid a printing error.

The solution is to either increase the hard drive capacity of the system or to move the printing or customer files to another system on the network.

Of course, I could be wrong about this....;>) but it's the first thing that occurred to me.

Posted on Mar 06, 2014

  • Steve McInally Mar 06, 2014

    Actually we have dedicated print servers so they do not get spooled on any of the PCs listed, but it's all a moot point since we changed the OS of the computer storing the files to 64bit XP and have had no issues since. We actually used a Win8 PC for a little while too and it didn't have any issues so it's specific to Win7

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 17 Answers

SOURCE: file sharing

it is possible

If you have multiple computers in your home and they are connected through a home network, you can share files among your computers. That means you no longer have to copy files to a floppy disk or USB flash drive to transfer them to another computer. Once you configure your computer to share files, you (or another user with the appropriate permissions) can, by using Windows Explorer, open them from other computers connected to the network, just like you’d open files that are stored on a single computer. You can also choose to have folders visible—but not modifiable—from other computers on the network.
To share files on your computer with other computers on a network, you need to:
Share a folder on your computer. This will make all of the files in the folder available to all the computers on your network (you can’t share individual files).
Set up user accounts on your computer for everyone who needs to connect to your shared folder. If any of the accounts are Limited User accounts (unless an account is a Computer Administrator account, it is a Limited User account), follow the steps in Set permissions for files and folders to enable them to open your files.

To access shared files that are on another computer on your network, you need to:
• Connect to the shared folder from other computers on the network. This procedure is described in Map a network drive.

Note: By default, file permissions only allow your user account and administrators on your local computer to open your files, regardless of whether a person is sitting at your keyboard or at another computer. It may help to keep these three things in mind when setting up file sharing:
• Files have user permission settings.
• Every computer has its own user database.
• Some accounts are administrator accounts and some aren’t.

Configure your computer to share files To share a folder on your computer so that files stored in the folder can be accessed from other computers on your home network
1.
Log on to your computer as an administrator. For more information, see Access the administrator account from the Welcome screen.
2.
Click Start, and then click My Documents.
68599-click-my-documents.gif 3.
Right-click the folder that you want to share, and then click Sharing and Security.
68599-click-sharing-and-security.gificotip.gif Tip: If you want to share your entire My Documents folder, open My Documents, and then click the Up button on the toolbar. You can then select the My Documents folder.
4.
If you see a message that reads, As a security measure, Windows has disabled remote access to this computer, click the Network Setup Wizard link. Then follow the instructions in How to set up your computer for home networking. On the File and printer sharing page of the Network Setup Wizard, be sure to select Turn on file and printer sharing. If you do not see this message, skip this step and go to step 5.
68599-click-network-setup-wizard.gif Note: If you do not see the Network Setup Wizard link or the Share this folder on the network check box, your computer probably has Simple File Sharing disabled. This is a common change made to computers used for business. In fact, it happens automatically when a computer joins an Active Directory domain. You should follow these instructions to share a folder instead.
5.
In the Properties dialog box, select the Share this folder on the network check box.
68599-click-share-this-folder.gif 6.
If you want to be able to edit your files from any computer on your network (instead of just being able to open them without saving any changes), select the Allow network users to change my files check box.
68599-click-allow-network-users-to-change-my-files.gif 7.
Click OK.
68599-click-ok.gif Windows Explorer will show a hand holding the folder icon, indicating that the folder is now shared.
To connect to the shared folder from another computer, follow the steps described in How to map a network drive.
Note: By default, only you and other people with an administrator account on the computer sharing the folder will be able to open your files. To limit access of specific users with an administrator account on the computer sharing the folder, read How to set permissions for files and folders.

Posted on Aug 14, 2008

frcs68
  • 1605 Answers

SOURCE: password on shared documents on a workgroup

Password Protect Folders in XP
To password protect a folder built into Windows XP (for other Windows flavors, there are some freeware/shareware programs out there).
If you have a log in password for your account, this can be used to protect folders from other users. If not, you need to creat one. Your hard drive must be formatted using NTFS (which it probably is unless you're dual booting with another operating system). Here's what to do...
Right-click the folder that you want to make private and choose "Properties" (or Alt+Double-click). Go to the "Sharing" tab and check the "Make this folder private" box.
private-folder1.jpg
Click Apply . If you do not have a password on your account, a box will pop up asking if you want to assign a password. This must be done if you want to make the folder private, so click Yes . You will need to use your password to log on to your computer from then on.
Type in a password then confirm it. Click the "Create Password" button then close the Password window.
Click OK in the Properties dialog box.
Now anyone else logged on to your computer can't access that file without knowing your password.

Posted on Dec 02, 2008

frcs68
  • 1605 Answers

SOURCE: Vista Laptop cannot connect to XP users

go to control panel>>add and remove prgrams>>click on add/reomve windows components on the left panel.
make sure you have the system CD.
put a check mark in "networking services" and "other network files and print services" install the addtional services.
check the share volume, make sure you have given the user rights to access the drive.

Posted on Jan 30, 2009

efs_perpends
  • 1996 Answers

SOURCE: Unable to ping my ISP gateway

This could be an issue having to do with the installed drivers for your network adapter. XP and Vista use different drivers, even though the hardware is the same...Take a look through this tutorial and make sure all your network hardware has vista drivers installed. Also possibly helpful would be a read through of this vista help site...
I would start there, and if you need further assistance after making sure you have the correct drivers for vista, write back and we'll be happy to help you sort it out...

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!



Posted on May 11, 2009

T3KK
  • 171 Answers

SOURCE: i m using vista home premium 64 bit opreting

You can right click on the program and select properties - this will let you run the program as if under different OSs...

Alternatively, you can install VirtualBox, install a 32bit OS on that like XP and install Turbo C onto that so it works....

finally you can upgrade your Turbo C to Microsoft's free Visual C Express available here - I would suggest this as your best option as it is more modern, better environment and gives you several more years of use than you have with Turbo C

If this helped you, then please help me and vote - thank you

Posted on Oct 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

C0000005 error


A C0000005 Error is a Windows System error, not a VFP Error. It is an Exception Error that occurs when a process (application, driver, etc.) tries to execute a processor command that references memory outside the space allocated to that process by the Operating System.
There are many possible causes ranging from corrupt data tables, to a bad network connection, ActiveX controls, or Printer or Video driver errors. Without knowing what type of error you are seeing, it is impossible to guess what the cause may be. ~ Vladmir

May 06, 2013 | Microsoft Windows XP Home Edition

Tip

Common FTP Error Codes


110 Restart marker reply. In this case, the text is exact and not left to the particular implementation; it must read: MARK yyyy - mmmm where yyyy is User-process data stream marker, and mmmm server's equivalent marker (note the spaces between markers and "=").

120 Service ready in nnn minutes.

125 Data connection already open; transfer starting.

150 File status okay; bout to open data connection.

200 Command okay.

202 Command not implemented, superfluous at this site.

211 System status, or system help reply.

212 File status.

213 File status.

214 Help message. On how to use the server or the meaning of a particular non-standard command. This reply is useful only to the human user.

215 NAME system type. where NAME is an official system name from the list in the Assigned Numbers document.

220 Service ready for new user.

221 Service closing control connection.

225 Data connection open; no transfer in progress.

226 Closing data connection. Requested file action successful (for example, file transfer or file abort).

227 Entering Passive Mode (h1, h2, h3, h4, p1, p2).

230 User logged in, proceed. Logged out is appropriate.

250 Requested file action okay, completed.

257 "PATHNAME" created.

331 User name okay, need password.

332 Need account for login.

350 Requested file action pending further information.

421 Service not available, closing control connection. This may be a replay to any commend if the service knows it must shut down.

425 Can't open data connection.

426 Connection closed; transfer aborted.

450 Requested file action not taken.

451 Requested action aborted. Local error in processing.

452 Requested action not taken. Insufficient storage space in system. File unavailable (e.g., file busy).

500 Syntax error, command unrecognized. This may include errors such as command line too long.

501 Syntax error in parameters or arguments.

502 Command not implemented.

503 Bad sequence of commands.

504 Command not implemented for that parameter.

530 Not logged in.

532 Need account for storing files.

550 Requested action not taken. File unavailable (e.g., file not found, no access).

551 Requested action aborted. Page type unknown.

552 Requested file action aborted. Exceeded storage allocation (for current directory or dataset).

553 Requested action not taken. File name not allowed.

Good luck!

on Jan 12, 2010 | Computers & Internet

Tip

COMMON FTP ERROR CODES


~~~~~~~~~COMMON FTP ERROR CODES~~~~~~~~~~
# Description

110 Restart marker reply. In this case, the text is exact and not left to the particular implementation; it must read: MARK yyyy = mmmm where yyyy is User-process data stream marker, and mmmm server's equivalent marker (note the spaces between markers and "=").

120 Service ready in nnn minutes.

125 Data connection already open; transfer starting.

150 File status okay; about to open data connection.

200 Command okay.

202 Command not implemented, superfluous at this site.

211 System status, or system help reply.

212 Directory status.

213 File status.

214 Help message.On how to use the server or the meaning of a particular non-standard command. This reply is useful only to the human user.

215 NAME system type. Where NAME is an official system name from the list in the Assigned Numbers document.

220 Service ready for new user.

221 Service closing control connection.

225 Data connection open; no transfer in progress.

226 Closing data connection. Requested file action successful (for example, file transfer or file abort).

227 Entering Passive Mode (h1,h2,h3,h4,p1,p2).

230 User logged in, proceed. Logged out if appropriate.

250 Requested file action okay, completed.

257 "PATHNAME" created.

331 User name okay, need password.

332 Need account for login.

350 Requested file action pending further information

421 Service not available, closing control connection.This may be a reply to any command if the service knows it must shut down.

425 Can't open data connection.

426 Connection closed; transfer aborted.

450 Requested file action not taken.

451 Requested action aborted. Local error in processing.

452 Requested action not taken. Insufficient storage space in system.File unavailable (e.g., file busy).

500 Syntax error, command unrecognized. This may include errors such as command line too long.

501 Syntax error in parameters or arguments.

502 Command not implemented.

503 Bad sequence of commands.

504 Command not implemented for that parameter.

530 Not logged in.

532 Need account for storing files.

550 Requested action not taken. File unavailable (e.g., file not found, no access).

551 Requested action aborted. Page type unknown.

552 Requested file action aborted. Exceeded storage allocation (for current directory or dataset).

553 Requested action not taken. File name not allowed.

on Dec 03, 2009 | Computers & Internet

1 Answer

La impresora 4345mfp se bloquea y nose como hacer la actualizacion del firdware.


Upgrading the firmware
The MFP has remote firmware update (RFU) capability. Use the information in this section to
upgrade the MFP firmware. The overall process involves the following steps:
1 Determine the current level of firmware that is installed on the MFP.
2 Go to the HP Web site and find out whether a firmware update is available. If an update is
available, download the latest firmware to your computer.
3 Transfer the new firmware from your computer to the MFP.
Determining the current level of firmware
To determine the current level of firmware, view the configuration information on the MFP control panel. To view the configuration information, follow these instructions.
1 Press MENU.
2 Touch INFORMATION.
3 Touch PRINT CONFIGURATION. The configuration page prints.
4 The firmware datecode is listed in the section called Device Information. The firmware
datecode has this format: YYYYMMDD XX.XXX.X. The first string of numbers is the date, where
YYYY represents the year, MM represents the month, and DD represents the date. For example, a firmware datecode of that begins with 20040225 represents February 25, 2004.
Downloading the new firmware from the HP Web site
To find the most recent firmware upgrade for the MFP, go to www.hp.com/go/lj4345mfp_software.
This page provides instructions for downloading the new firmware version.
Transferring the new firmware to the MFP
Use one of the following methods to update the firmware.
Using FTP to upgrade the firmware on a network connection
NOTE The MFP can receive an .RFU file update as long as it is in a "ready" state.
The elapsed time for an update depends on the I/O transfer time, as well as the time that it takes for the MFP to reinitialize. The I/O transfer time depends on a number of things, including the speed of the host computer that is sending the update. If the remote firmware update process is interrupted before the firmware is downloaded (while Receiving Upgrade appears on the control-panel display), the firmware file must be sent again. If power is lost during the flash DIMM update (while the Performing Upgrade message appears on the control-panel display), the update is interrupted and the message Resend Upgrade appears (in English only) on the control-panel display. In this case, you must send the upgrade by using the parallel port. Finally, any jobs that are ahead of the RFU job in the queue are completed before the update is processed.
Follow these instructions to perform the upgrade by using FTP.
To upgrade the firmware on a network connection by using FTP
1 Take note of the IP address on the HP Jetdirect page. The HP Jetdirect page is the second page that prints when you print the configuration page.
NOTE Before upgrading the firmware, make sure that the MFP is not in Sleep mode.
Also make sure that any error messages are cleared from the control-panel display.
2 Open an MS-DOS command prompt on your computer.
3 Type: ftp <TCP/IP ADDRESS>. For example, if the TCP/IP address is 192.168.0.90, type ftp
192.168.0.90.
4 Press Enter on the keyboard.
5 When prompted for the user name, press Enter.
6 When prompted for the password, press Enter.
7 Type bin at the command prompt.
8 Press Enter. The message 200 Types set to I, Using binary mode to transfer files appears in
the command window.
9 Type put <filename> where <filename> is the name of the .RFU file that was downloaded
from the Web, including the path. For example, type put C:\LJ\4345FW.RFU, and then press
Enter.
NOTE If the file name or path includes a space, you must enclose the file name or path
in quotation marks. For example, type put "C:\MY DOCUMENTS\LJ\4345FW.RFU"
The following series of messages appears in the command window:
? 200 PORT command successful
? 150 Opening BINARY mode data connection
? 226 Ready
? 226 Processing Job
? 226 Transfer complete
Then, a message that contains the transfer-speed information appears.
10 The download process begins and the firmware is updated on the MFP. This can take
approximately five minutes. Let the process finish without further interaction with the MFP or
computer.
NOTE The MFP automatically turns off and then on again after processing the upgrade.
11 At the command prompt, type: bye to exit the ftp command.
12 At the command prompt, type: exit to return to the Windows interface.

Using MS-DOS commands to upgrade the firmware
To update the firmware by using a network connection, follow these instructions.
1 From a command prompt or in an MS-DOS window, type the following: copy /B <FILENAME>
\\<COMPUTERNAME>\<SHARENAME>, where <FILENAME> is the name of the .RFU file
(including the path), <COMPUTERNAME> is the name of the computer from which the MFP is
being shared, and <SHARENAME> is the MFP share name. For example: C:\>copy /b C:
\9200fW.RFU \\YOUR_SERVER\YOUR_COMPUTER.
NOTE If the file name or path includes a space, you must enclose the file name or path
in quotation marks. For example, type: C:\>copy /b "C:\MY DOCUMENTS\3500FW.RFU" \\YOUR_SERVER\YOUR_COMPUTER.
2 Press Enter on the keyboard. The control panel shows a message that indicates the progress of the firmware upgrade. At the end of the upgrade process, the control panel shows the Ready
message . The message 1 file(s) copied appears on the computer screen.

Jul 15, 2011 | HP LaserJet 4345mfp Printer

2 Answers

Use Printer Offline: Error Processing Command


Hi,


Go to system settings and select the 'Printer' option.

Right-click on the printer and enable the 'Use Printer Online' function.

Cancel all the printing jobs till that moment and redo the process.

Sometimes the 'Printer Offline' message occurs due to a 'Job Stuck' issue.

Check all network connections and functions.

Be sure the network interfaces work properly.

Turn the printer off and on to see whether the device is working properly.

Jun 07, 2010 | HP DeskJet 6540 InkJet Printer

1 Answer

Logitech Chillstream driver install problem


Based on this message you need to clean up your hard drive, run the cleanup wizard to free up space. http://support.microsoft.com/kb/306542

Jan 01, 2010 | Logitech ChillStream Game Pad

1 Answer

Windows XP MSHOME Network problems


azerty, You applied this to the other computer too?


You may also come across this message and Event ID: 2011 in Event Viewer after you install Norton Antivirus for Windows (which seems to be the commonest reason why people see this message).

Jan 14, 2008 | Computers & Internet

3 Answers

Not enough server storage is available to process this command


Solution described here:
http://forums.techguy.org/networking/502748-solved-cannot-map-network-drive.html

Info on IRPStackSize here:
http://support.microsoft.com/kb/285089

Nov 15, 2007 | LaCie Computers & Internet

1 Answer

Maxtor Personal Storage 3200 200 GB... Problem


Its going to be a hardware thing. Is the drive connected to a UB2 port? The network itself has its own data transfer rate  ( ie. gigabit ) you need to make sure you cables are no longer than 6 ft, its plugged into a high speed port, and that all ports on the chain are of the same speed. If you have the option, go firewire for this. If that does not rectify it, check adminsitrator properties of the drive.

Oct 06, 2007 | Maxtor Personal Storage 3200 (U01E200) 200...

1 Answer

Adding an external hard drive to a home wireless network


Try setting configuring the privledges setting. Make sure there the network setting is correct, and make sure all user accounts have admin access to network

Oct 06, 2007 | Maxtor Personal Storage 3200 (U01E200) 200...

Not finding what you are looking for?
Microsoft Windows 7 Professional for PC Logo

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

2727 Answers

Piyal Perera
Piyal Perera

Level 3 Expert

528 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18391 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...