Question about GE MiniCam Pro HO98067 Webcam

1 Answer

Can't find driver

I followed all the directions twice, but it still can't find the driver to install the camera when I plug the USB in.

Posted by on

  • 4 more comments 
  • Taylor Marek
    Taylor Marek Aug 28, 2007

    Still have the problem

  • Taylor Marek
    Taylor Marek Aug 28, 2007

    Ok, sounds good.

  • Taylor Marek
    Taylor Marek Aug 28, 2007

    Just checked and my USB Drivers are up to date. Is there any other problem as to why I can't use the webcam?

  • Taylor Marek
    Taylor Marek Aug 28, 2007

    I've tried both, but still no luck.

  • Pastor Rich Dec 10, 2007

    Worked fine one day, plugged it in and it said "Can't find driver". Have tried different USB slots, and used different programs ( Yahoo Messenger, Aim) with the same results

  • ace153 Dec 21, 2007




    unplug reboot system


×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 72 Answers

Here is a link to download the driver you need. http://members.driverguide.com/driver/detail.php?driverid=390090&action=summary Good luck and stay safe on the net.

Posted on Aug 28, 2007

  • 1 more comment 
  • Allen  Tate
    Allen Tate Aug 28, 2007

    It could also be possible that the drivers for your USB ports need to be updated.

  • Allen  Tate
    Allen Tate Aug 28, 2007

    try using another USB port, could be that one is damaged.

  • Allen  Tate
    Allen Tate Aug 28, 2007

    I would say try hooking it to another computer if you have one to see if the camera is even working.

    But finally, if that doesn't work, give tech support a call...maybe this model has a specific quark that is special to it.

    Sorry i couldn't help much otherwise

×

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
myob247
  • 1342 Answers

SOURCE: Can't find driver

Go HERE

Scroll down to PC Cams

Posted on Jun 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can't download the CD rom. I'm trying to download the drivers and it won't work. It's not because I had it plugged into my computer too soon. I tried it twice, once following the...


Hello,
This device is made for windows 95- Vista. There are no officially supported windows 7 drivers yet so if you are running windows 7 you may run into issues. The unit draws power from your USB port and will not work as good if plugged into a passive USB hub so make sure to plug it directly into a USB 2.0 port on your PC / MAC.
I suggest downloading the latest drivers from the internet as the CD drivers pay be outdated.
http://tascam.com/product/us-122/downloads/
Chris

Jul 07, 2011 | Tascam US-122 USB Audio/MIDI Interface...

1 Answer

How i install my webcam?


Hi,
Welcome to Fixya .
Please follow the below direction to install the webcam
1: Install the Web cam Driver that comes with the device or if you have 2: Plug the webcam usb cable to the computer usb port 3: Now the system will detect the web cam and start installing the device. 4: Now you can use the device. 5: To check if it is properly installed Go to device manager > Check web camera under Imaging devices.
That's all
Thanks

Mar 04, 2011 | Office Equipment & Supplies

3 Answers

How do i hook up a web camera


Basically. You plug in the USB cable. Install the proper drivers. And use the software you want, to use that camera.

Sep 02, 2009 | Computers & Internet

1 Answer

The webcam button on my yahoo messenger is gray. It won't let you select it. My husband is in Afghanistan. We used it the other day and he was able to see me. Now it won't work. Help please!


If it is a built-in webcam like in the edge bezel of a laptop monitor, look for a disc from the manufacturer to try and reinstall the driver for the camera.

If it is a camera that you plug into a USB slot, try plugging it into a different USB slot while the computer is on. If Windows doesn't recognize it and install the driver after you've plugged it into a new port, you may need to get the CD that came with it and use that to install (follow directions, which usually include not plugging the camera in until after you ran the CD, or during the middle of it) or if you don't have the CD, you can probably visit that manufacturer's website and download the driver or installation program.

Apr 16, 2009 | Computers & Internet

1 Answer

GE MiniCam Pro


I realized that my daughter didn't follow the directions exactly. So I un-installed the drivers and then just like the directions said. I loaded the drivers without the camera plugged into the computer. After the drivers were loaded I rebooted my computer and then plugged the camera in and it worked. Hmmm funny thing that it works when you follow the directions from the beginning.

Sep 09, 2008 | GE MiniCam Pro HO98067 Webcam

1 Answer

Digital camera keychain by bell marscam


After you delete very thing you have installed on your computer that has anything to do with your camera,
Download this and don't have your camera plug into your computer then install this it works....

: MR97310c Mini Digital Camera Drivers Version 2.03 All Functions work.zip

* Turn on your computer or reboot.(this ensures consistent starting point)
* Connect your camera to the PC using USB 1.1 cable.
* When the found new hardware window opens install drivers automatically.
* * the found new hardware window may open up more than once. If so then click install drivers automatically for each time it opens up.
* Double click the "PCCam" shortcut in your "All Programs" menu and follow directions.



If this does does not work ...

* Check to make sure the USB port is working properly in device manager.
* Make sure your computer is running a fully updated version of supported Microsoft Windows platform. Check computer properties for version of OS.
* Try having the camera turned on before connecting it to your computer.

Jun 16, 2008 | Jenoptik JD C160 Digital Camera

2 Answers

Connection between camera and computer


What operating system are you using? Is you camera connected via USB? Have you tried using another USB port? Did you make sure to install the software before plugging in your camera?

Generally if you are running Windows 98, you will need to reboot after installing the software to even have a chance of the camera being recognized correctly.

If you are running Windows 2000, XP or Vista, the camera should be recognized and a driver installed or searched for from the CD software you installed before plugging in the camera.

Sometimes if you plug in the camera first without installing the software, the PC finds a new device with no driver. You can see this by going to Control Panel -> System -> Hardware -> Device Manager and you should see and exclamation on a device in the list. You need to remove this item and reboot your PC.

Now install the software first and when the install is done, then plug in your camera. Generally this works out pretty well.

Apr 29, 2008 | Canon PowerShot A80 Digital Camera

1 Answer

Doesn't work!! No red light!! Installed OK, but not camera!


USB DEVICES THE PROPER WAY ON INSTALLING USB DEVICES 1. Do not plug in your device right away. Install all drivers and software first! 2. Reboot 3. Plug the power or turn on your USB Device 4. Plug in the USB Port. 5. Windows Will detect the Device Automatically. Finish! Hope this helps.

Sep 14, 2007 | Veo Connect Webcam

1 Answer

Connecting OPtio S4i to PC


After formatting my PC to upgrade it I've been unable to install the USB driver software to save pictures from my Tentax OPtio S4i to my PC.

My computer isn't recognising my camera when I plug it into the USB port.

When I've tried to install the Driver using the disk I got with my camera, at the stage where it asks me to MODIFY REPAIR or REMOVE, the software I get the following showing up on display boxes:

Aug 19, 2007 | Pentax Optio S4i Digital Camera

Not finding what you are looking for?
GE MiniCam Pro HO98067 Webcam Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Computers & Internet Experts

micky dee

Level 3 Expert

3002 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2022 Answers

Ricky Ostrom
Ricky Ostrom

Level 2 Expert

274 Answers

Are you a GE Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...