Question about Haier Heating & Cooling

Open Question

Hc36a1vas the outside fan won't turn on without a jumpstart

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 508 Answers

SOURCE: A/C not working, outside fan not turning without assistance

is fan spinning fast enough it has to have alot of velocity to cool condensor coils if you haft to push fan to get going its probably shot and get new motor the ac is a sealed system and hardly ever will leak freon!!!Best of Luck to You!!! :)

Posted on Jul 02, 2009

  • 304 Answers

SOURCE: Trane XL13i outside fan won't come on

Bad capacitor it needs to be replaced

Posted on Jul 26, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Truck won't start


sounds like the starter. if automatic make sure it is in park. also just because all the other electricle is operating dont mean you dont hhave a bad battery .try a jumpstart for the heck of it .it could also be bad wire conection check youre battery see if corosion is present on the termanals

Mar 21, 2013 | Denso 1996 GMC C1500 Sierra 5.7L...

1 Answer

Nutone model nsp130 fan won't turn off


Does it have a remote? If it does change the frequency in both the transmitter & receiver.

Feb 06, 2013 | Dryers

1 Answer

Trane XL13i outside fan won't come on


Bad capacitor it needs to be replaced

Jul 26, 2012 | Heating & Cooling

1 Answer

What is the best position for an engine fan relative to the fan shroud?


the fan should sit so about 1/2 of the fan blade is outside of the edge of the fan shroud.the main purpose of the fan shroud is to force air into the fan and increase the air flow over the fan blades so the fan can push the air over the motor more efficeintly than without a shroud.if the fan is too far into the shroud it changes the amount of air circulation over the motor as well as if the fan is too far outside the shroud.

Dec 13, 2011 | Cars & Trucks

1 Answer

Fan outside isn't running and when turned on the unit outside is running very loud.


The fan outside keeps your compressor cool, the compressor, if left running without the fan running to cool it down can get damaged, the fan normally gets its power from a switch box located outside or near
it. or the motor on the fan could have just gone bad. the fan motor is not as expensive as the compressor to replace. its easy to replace. sometimes what goes out 1st on these motors is the capacitor,the capacitor stores enough voltage to give the motor that extra push to turn. many times its just the capacitor that goes out. when you purchase a motor make sure you also get the matching capacitor.if you can turn the fan and it starts running, its the capacitor, if it starts running and has any kind of bearing noise then you will have to replace the motor. good luck!

Aug 08, 2011 | Heating & Cooling

1 Answer

Replace battery for PULSAR Y911. how ro start it?


To restart the watch, you have to short the battery with a pin that sits under a sticker on the back of the watch. The sticker is supposed to explain that. You can usually do it with a pair of sharp scissors or tweezers. Without "jumpstarting" the watch, just installing a new battery won't start the watch. (I don't know why.)

Dec 04, 2009 | Pulsar Watches

3 Answers

A/C not working, outside fan not turning without assistance


is fan spinning fast enough it has to have alot of velocity to cool condensor coils if you haft to push fan to get going its probably shot and get new motor the ac is a sealed system and hardly ever will leak freon!!!Best of Luck to You!!! :)

Jul 02, 2009 | Bryant 462AJC021BA Air Conditioner

Not finding what you are looking for?
Heating & Cooling Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Haier Heating & Cooling Experts

Tom Chichester

Level 3 Expert

33294 Answers

howard thompson

Level 2 Expert

373 Answers

Terry Hair

Level 3 Expert

4125 Answers

Are you a Haier Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...