Question about Office Equipment & Supplies
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Just restart the system and turn off the printer and turn on the printer it will work.
Check did you correctly placed your cartidges.
Posted on Mar 03, 2008
SOURCE: CANON PIXMA iP3300
1. turn off printer
2. Hold down resume, dont realase and press power button
3. realase resume button, now press twice resume button but dont realase power button
4. realase all.
5.now press twice again resume button and plug off power cable
6. turn on printer with plugin power cable
7. your printer will reset.
iff not working, you must chek pointing contact in head printer, use some claener with cottonbuds to clear the contact.
may you sukses!!!
Posted on Dec 19, 2008
SOURCE: we have canon pixma mp550
The B200 error is "Printhead Temperature exceeded", What this means that while you were printing some document, either one or more of the printhead ink wells ran out of ink and the printing continued. Printing without ink in the wells will overheat the nozzles and can potentially burn the out.
If the error will not go away once you have unplugged the printer for at least 5 minutes, then there is the possibility that you have already burnt out the head. Remove the printhead and use a 5x magnification glass to look VERY CLOSE at all of the nozzles to see if you can detect any possible burnt out nozzle. If there are the a new head is mandatory. Just be sure it's worth it - a new printer might be cheaper.
Posted on Jun 16, 2010
SOURCE: Error Code B200
Try keeping the paper only in the bottom tray (there's a tray in the bottom) Try pulling any paper out of the top and just close that top tray. Open up the head so that u can see the ink cartridges and turn the printer on and off and maybe it will center itself again. If it's still not working (even if lights aren't red and print head wont align in the center) try manually moving the head back and forth like 18 times so you can lubricate that rail in the back that's holding it. After that, re-turn it off and on again.
Posted on Aug 02, 2010
Tips for a great answer:
Feb 01, 2016 | Office Equipment & Supplies
Jun 23, 2013 | Canon PIXMA MX860 All-In-One InkJet...
May 02, 2011 | Canon PIXMA All-In-One Photo Printer with...
Feb 16, 2011 | Canon PIXMA MX860 OFFICE AIO-2.5IN LCD...
Feb 12, 2011 | Canon PIXMA MP540 All-In-One InkJet...
Jun 21, 2008 | Canon PIXMA iP3300 InkJet Photo Printer
247 people viewed this question
Usually answered in minutes!