The control lock in on and I am unable to run my Front Load Washer. Please help me so I can wash clothes
I unpluggex my GE front loader washer wich is what we were told to do in order to have it reset itself well afetr i plugged it in said door locked, and it won't let me turn the power onor start it or anything. Plus when i turn the knob on the front only numbers one through five appear or three dashes like this ---. help i have clothes sitting in the machine.
ok, you are in the model selection part of the service mode. for 6240 I believe the model code is 3 select this and press start. normally to release control lock press and hold small I button by start button. if model selection in incorrect it can still be corrected. only difference in models is cycles matching the labels. you can tell by the time indication for each cycle if it doesnt look right then check book inside top cover
Was this helpful?
Yes
No
Popular Solutions for GE WBVH6240F Front Load Washer
Water pours out from under the machine at initial fill. I can see it coming from the little valve...
(More)
Water pours out from under the machine at initial fill. I can see it coming from the little valve inside above the door....not necessarily the main fill valve on the left.From underneath I can see it running down the counterweight in the front of the machine. This is not a small leak, it runs out on to the floor as fast as it is filling.
We have cleaned out our filter and drained the machine. But when it is in a wash cycle it will not...
(More)
We have cleaned out our filter and drained the machine. But when it is in a wash cycle it will not drain and will only spin once or twice and stop.