Question about Televison & Video

1 Answer

Baird tv TV not showing any pictures but tv power on. why?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Two things you can try:
Check the remote control and press the button for Digital input. Someone may have set the tv to expect an analogue signal from the aerial while you were pouring your wine. Because the analogue tv signal has been switched off the tv won\'t be receiving anything off-air. It will need setting back to digital to receive Freeview.

OR

The television set may be dropping itself into "AV" mode and is expecting an input through a SCART or HDMI socket. Sometimes an external device (video or DVD player) will hijack the television if the set-up hs been configured for this. Try unplugging all external devices (Sky box, DVD, VCR, games console or whatever you have plugged in). Make sure that the telly is configured to digital input and tuned to BBC1. Then see if the it will show the programme.
If the television is actually broke then you should return it if it\'s still under guarantee.

Posted on Jul 15, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 308 Answers

SOURCE: HDMI socket broken on 42 inch Baird TV

Depends if you can find a shop that can do surface mount repairs. Not all do it. Most usually replace the whole board. Then it would depend on the price of the board and labour.

Posted on Apr 15, 2010

  • 1 Answer

SOURCE: my baird tv comes on

my 47" baird tv comes on but goes blurry when connected to any external device like a dvd or set top box. can anyone help.thanks

Posted on Mar 20, 2011

  • 149 Answers

SOURCE: i need to download a users manual for a Baird 42"

GO TO WWW.SERIAL.WS

Posted on Sep 27, 2011

SOURCE: i hvae a baird 32inch lcd and for some reason it will gon on ok an the picture and sound is great and within a min or 2 the tv just goes completly off no standby light or nothing,but if i press standb

this is big problem for you . find a professional who will help you

Posted on Mar 11, 2012

SD Tech
  • 14553 Answers

SOURCE: reviews on baird 47 inch tv wont turn on

I see so many here with no sound/nopicture issues:

ISSUES:

1. IF sound main fuse/s are good.
2. If no power or standby check main fuse, standby power supply and any signsof damage you can see---burnt parts etc.
3. almost all these sets the troubleshooting involves checking voltages on the main power board to narrow down theproblem.
4. Be safe and if you do not know what you are doing don't open the set.

Answers to issues:

1. RE:fuses---if a blown fuse is found get a good replacement(not the genericones like Radio Shack). Many fuses are special even aside from amperage--Don'tput a higher rated amperage fuse in the set for any reason.

2. RE: power supply in set: if total dead aside from main fuse the set uses astandby power supply that runs 7/24 and a main supply (some are combined andsome not.

Here aside from checking fuses you want to examine all the filter caps on thepower/standby to see if any are puffed up or buldged up in some fashion--Iattach a photo of a good one---top should be silver metal and PERFECTLY flatand have no brown material coming out on top or bottom.

What happens in the standby area is they use caps with too low a voltage rating(saves money) which causes them to fail in a year or two---the standby runs7/24 and the heat dries out the caps and they fail.

3. Trouble shooting consists of the above and then at some point you have tobuy and try a board to see if it fixes it or not.

4. Safety first--no TV set is worth getting injured or even killed over.
4_1_2012_4_19_36_pm.jpg

Posted on Apr 01, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Baird jo47 won't turn on and the standby red is flashing with sound what is the problem


My baird JO47 tv is stuck on standby - Digital TV - Streaming ...

www.tomsguide.com/forum/55998-4-baird-jo47-stuck-standby

Dec 17, 2012 - 4 posts - ‎2 authors
My Baird JO47 tv is stuck on standby and won't come off. ... I have a panasonic 50" TV it will not turn on no green light or standby red light ... Forum; my tv standby light keeps flashing blue on and off and won't switch on Forum ...

Baird JO47 Stuck on Standby ' Electronics Forum (Circuits ...


Dec 15, 2015 | Televison & Video

1 Answer

Baird tv 42


This fault is much more complicted than other to troubleshoot. Contact any "Experienced" service technician. I can't provide a solution to your problem, without its screen shot.
Gopakumar Gopalan Google

Feb 24, 2014 | Televison & Video

1 Answer

Baird tv has no picture but sound ok. picture lights up when turning on and off but then goes out.y


Hi Anon,
If your LCD TV or monitor has stopped working, or is displaying one of the following symptoms, then it's a candidate for some new capacitors
- Flickering screen
- Screen image disappears after several seconds
- Dim screen
- Slow start
- Power LED on, but no picture
- Unusual colors and/or lines
The primary cause of LCD TV and monitor failure is caused by faulty capacitors. You can examine the capacitors in your LCD TV or monitor and actually see if they are bad.
If they appear bulged on top, then they need to be replaced.
New capacitors will solve a host of problems in LCD monitors and TV's and will extend the life of your monitor or TV by several years.
Check the cables, connectors and connections.
If your TV, flatscreen, or monitor is more than 5 years old it is more like to have suffered a component failure.
Take it to a repair shop.
https://www.youtube.com/watch?v=TR2iWN6b-LY
LCD TV Repair No Power Power Supply Common Symptoms Solutions How to...

Jan 07, 2014 | Vizio GV47LF Television

1 Answer

I have baird x47dtv no picture no lights power going through it and a alarm sound very faint coming through speaker


Baird branded (vestrel tv) also called wharfedale 47" tv use 2 power supplys identical to each one slave one master. Inside tv one on left is main supply
Usually all you havecto do is replace this one board dont listen to people saying mainboard ect thats rubbish...these tv have common faults with the poorly designed phihong psm210-417R switching power supply (voltages 5v 12v & 16.5 and i think 24v cant remember

Jun 15, 2013 | Televison & Video

1 Answer

Could anyone help me i have a baird jo32 tv does any one know wat the correct codes is so that i can use my sky tv remote to controle my tv?


Hello
Codes for
Baird TV with Sky Plus are:

137 221 371 218 220 101 236 100 033 245



1* Select any channel on the TV.

2* Point your Sky+ remote control away from the TV and press the tv button.

3* Press and hold down the Select and red buttons simultaneously on the Sky+ remote control until the red light at the top of the Sky+ remote control flashes twice.

4. Input the 3 digit number from the Sky+ remote control codes then press the Select button. The red light at the top of the Sky+ remote control should flash twice.

5* Point the Sky+ remote control at the TV and try the volume button.

If this works try the other TV functions.

If these work then the correct code has been selected.

It's important to note that not all TV functions will be supported by the Sky+ remote control e.g. Picture in Picture.
If all functions do not work correctly, then repeat steps 1 - 3 and work through all the relevant 3 digit numbers from the Sky+ remote control codes, until you find the code which supports all or as many of the TV functions as possible.

Jul 10, 2011 | Televison & Video

1 Answer

Baird 42 inch LCD tv turns on but has black screen but no picture or sound


I have a 42 inch baird tv it will show the blue screen for a couple of seconds and then there's nothing just a black screen

Dec 08, 2010 | Televison & Video

1 Answer

I need to download a users manual for a Baird 42" tv lcd


Try the following sites for the users manual
tv.manualsonline.com/ex/product/headline/.../Baird/.../PR42BAIRD www.user-guides.co.uk/.../baird/baird42/baird-42-inch-tv-online-manual.html

May 03, 2010 | Sharp Aquos LC-37G4U 37 in. HD-Ready LCD...

1 Answer

Tv wont turn on


i had this problem myself, press the power button and when it goes green press it again but hold it for 10 seconds, then it should work fine mine did good luck :)x

Jan 29, 2010 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

187 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74251 Answers

Cindy Wells

Level 3 Expert

5129 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...