Question about Acer Aspire Computers & Internet

1 Answer

Online pc scan

I have problem that one keys push directly and message appear contineously

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Acer Master
  • 27,725 Answers

You could run the chkdsk disk utility
Click start run type cmd then type chkdsk/r/f which will scan for and attempt to repair any bad sectors and automatically fix any corrupt files on your Hard Drive.
or an easier way to run the chkdsk utility
Windows 7 chkdsk
http://www.w7forums.com/use-chkdsk-check-disk-t448.html
Click start control panel administrative tools computer management ,disk management right click on your drive select properties click tools click check now click start two boxes
automatically fix files and scan for and attempt recovery of bad sectors place then a tick in both boxes then select check now, start should schedule this task when restart
have no input while the chkdsk utility is in progress any input may further damage your computers Operating System and Hard Drive
http://download.cnet.com/jetclean/3000-18512_4-75627788.html
JetClean tidies your registry, gets rid of junk files, deletes broken shortcuts, and attempts to give your computer that like-new feel again.
Optimizers and Diagnostics.
http://download.cnet.com/360Amigo-System-Speedup-Pro/3000-18512_4-75332741.html 5E3422139C19CBED35C14826A44D4605
Improve your PC performance and fix errors.

if the problem is still persisting
Your computer's BIOS screen can be incredibly useful when you need to make certain hardware or system configurations.
How to access the BIOS on your laptop varies from manufacturer to manufacturer and model to model.
Even though Acer laptops are created by the same manufacturer, not all models access BIOS in the same manner.
While accessing the BIOS setup screen in and of itself is not difficult all you need to do is press a key the difficulty is in figuring out which key to hit.
Restart or power on the laptop.
Hit the "Pause/Break" key the moment the Acer boot screen (not the OS start-up screen) appears.
If the OS start-up screen appears before you can hit Pause/Break, you will need to restart the laptop.
Press "F2" or "Del" to access the BIOS set-up screen.
Depending on the age of your Acer laptop, you may need to instead press "Ctrl," "Alt" and "Esc" simultaneously to access BIOS.
Using the arrow keys navigate failsafe or optimized defaults press F10 to safe to cmos and exit to restart.

Posted on Jul 16, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to have internet connection on a PSP


Hi there. Here's how:

1. Go to the Main Menu of your PSP.

2. Go to Settings.

3. Scroll down to Network Settings and Press the X button.

4. Select Infrastructure Mode.

5. Select New Connection.

6. Name the connection so that you know it is for web browsing. (ex. WebConnect)
That way you can use another connection for the rest of your online games.

7. Push the Right Direction Key to go to the next menu.

8. Select the Scan option and let it pick up your WLAN settings.

9. Once it picks up a connect, Push the Right Direction Key to go to the next menu.

10. Select Custom for the Address Settings.

11. Push the Right Direction Key to go to the next menu.

12. Leave IP Address Setting on Automatic.

13. Push the Right Direction Key to go to the next menu.

14. Select Manual for your DNS Setting.

15. Push the Right Direction Key to go to the next menu.

16. Enter in 67.171.70.72 as your Primary DNS and just leave the Secondary DNS blank.

17. Push the Right Direction Key to go to the next menu.

18. Select "Do Not Use" for your Proxy Server settings.

19. Push the Right Direction Key to go to the next menu.

20. Push the Right Direction Key to go to the next menu.

21. Push the X button to save your settings.

22. Do a quick test of the connection to make sure it's working correctly.

23. Launch Wipeout Pure and go to the Download option in the main menu.

24. Select the name of the new connection you just made (ex. WebConnect), connect, and enjoy browsing the internet on your PSP.


Hope this helps.

Thank you for using Fixya!

Jun 30, 2011 | Sony PlayStation Portable (PSP) Console

Tip

How To Remove A Virus


Think your PC is infected ?

Here's what you can do to get rid of those nasty viruses.

===========================
A. Boot in Safe Mode with Networking:
===========================
1. Restart your computer.

2. Once your computer starts to turn on, press F8 (or for other computers, it could be F5) repeatedly until you see the boot option.

3. Using your arrow keys, highlight Safe mode with networking then press enter.

4. You could just log in as the Administrator or in your account.

5. Click on yes when it prompts you that you are running in safe mode.

===========================
B. Online virus scanners can quickly identify and fix a wide range of threats including viruses, worms, trojans, and spywares.
===========================
Here's a list of Essential Free Tools for Removing Spywares, Adwares and Malwares:

Trend Micro Housecall - will scan and remove threats

BitDefender Scan Online - will scan and remove threats

Ewido Online Scanner - (Now AVG) will scan and remove threats

F-Secure Online Scanner - will scan for rootkits as well

Jotti's Online Malware Scan

Kaspersky Online Scanner - appears to only scan for but not remove threats

Panda Activescan - appears to only scan for but not remove threats

McAfee FreeScan - appears to only scan for but not remove threats

eTrust Antivirus Web Scanner - will scan and remove threats

Symantec Security Check - will scan and remove threats

Dr.Web Online Check - user can upload and test for threats on particular files

on Mar 31, 2010 | Computers & Internet

1 Answer

Where is the aoss botton on the psp3000


Hello here's a quick guide for aoss!

1. Go to the Main Menu of your PSP.
2. Go to Settings.
3. Scroll down to Network Settings and Press the X button.
4. Select Infrastructure Mode.
5. Select New Connection.
6. Name the connection so that you know it is for web browsing. (ex. WebConnect)
That way you can use another connection for the rest of your online games.
7. Push the Right Direction Key to go to the next menu.
8. Select the Scan option and let it pick up your WLAN settings.
9. Once it picks up a connect, Push the Right Direction Key to go to the next menu.
10. Select Custom for the Address Settings.
11. Push the Right Direction Key to go to the next menu.
12. Leave IP Address Setting on Automatic.
13. Push the Right Direction Key to go to the next menu.
14. Select Manual for your DNS Setting.
15. Push the Right Direction Key to go to the next menu.
16. Enter in 67.171.70.72 as your Primary DNS and just leave the Secondary DNS blank.
17. Push the Right Direction Key to go to the next menu.
18. Select "Do Not Use" for your Proxy Server settings.
19. Push the Right Direction Key to go to the next menu.
20. Push the Right Direction Key to go to the next menu.
21. Push the X button to save your settings.
22. Do a quick test of the connection to make sure it's working correctly.

Good luck and please rate! Have fun gaming!

Jun 17, 2011 | Sony PlayStation Portable (PSP) Console

1 Answer

I need directions to remove radio from safe mode.


IMPORTANT NOTE: You must have the security anti-theft code for your Audi radio from the car manufacturer, or from an Audi dealer!

The sequence of programming for 2004 Audi A4 radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit.
5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!


Please do rate my response. Thanks!

Jan 27, 2011 | 2004 Audi A4

1 Answer

My compuuter is giving me a loud contineous sound


scan ur pc, if antivirus install it may be causing it , check sound drivers Check ur sound card information by doing this
Click on start menu
Click on Run
Type dxdiag, enter
Click on the sound tab
There is button of test direct sound click on this check if there is sound
Check ur registry. Check if the sound registry key is enabled or disabled. There could be an error in registry, run registry cleaner reg in out to scan for errors.

Aug 22, 2010 | Dell Inspiron 1501 Notebook

1 Answer

How to get on internet with pspgo?


Go to the Main Menu of your PSP.
Go to Settings.
Scroll down to Network Settings and Press the X button.
Select Infrastructure Mode.
Select New Connection.
Name the connection so that you know it is for web browsing. (ex. WebConnect)
That way you can use another connection for the rest of your online games.
Push the Right Direction Key to go to the next menu.
Select the Scan option and let it pick up your WLAN settings.
Once it picks up a connect, Push the Right Direction Key to go to the next menu.
Select Custom for the Address Settings.
Push the Right Direction Key to go to the next menu.
Leave IP Address Setting on Automatic.
Push the Right Direction Key to go to the next menu.
Select Manual for your DNS Setting.
Push the Right Direction Key to go to the next menu.
Enter in 67.171.70.72 as your Primary DNS and just leave the Secondary DNS blank.
Push the Right Direction Key to go to the next menu.
Select "Do Not Use" for your Proxy Server settings.
Push the Right Direction Key to go to the next menu.
Push the Right Direction Key to go to the next menu.
Push the X button to save your settings.
Do a quick test of the connection to make sure it's working correctly.
Launch Wipeout Pure and go to the Download option in the main menu.
Select the name of the new connection you just made (ex. WebConnect), connect, and enjoy browsing the internet on your PSP.

HOPE THIS WORKDS =P"Im a kid but Ill solve your question!"

Oct 05, 2009 | Sony PlayStation Portable (PSP) Console

1 Answer

I can't manage to scan directly from the scanner


Hello
Have you installed full software from the CD that came with the printer?
if not do that first, do you mean that you cant push printer button and automatic scan to computer?

Jul 02, 2009 | HP OfficeJet J4580 All-In-One Laser...

1 Answer

System security firewall message continous pop up


Please download Malwarebytes' Anti-Malware, update it and run a full scan. Remove everything it finds.

www.malwarebytes.org Rate the solution as Fixya !

Feb 22, 2009 | E-Machines eMachines Desktop PC

1 Answer

How to set up psp to internet


hey...there, try this one and follow the instuction.

1. Go to the Main Menu of your PSP.

2. Go to Settings.

3. Scroll down to Network Settings and Press the X button.

4. Select Infrastructure Mode.

5. Select New Connection.

6. Name the connection so that you know it is for web browsing. (ex. WebConnect)
That way you can use another connection for the rest of your online games.

7. Push the Right Direction Key to go to the next menu.

8. Select the Scan option and let it pick up your WLAN settings.

9. Once it picks up a connect, Push the Right Direction Key to go to the next menu.

10. Select Custom for the Address Settings.

11. Push the Right Direction Key to go to the next menu.

12. Leave IP Address Setting on Automatic.

13. Push the Right Direction Key to go to the next menu.

14. Select Manual for your DNS Setting.

15. Push the Right Direction Key to go to the next menu.

16. Enter in 67.171.70.72 as your Primary DNS and just leave the Secondary DNS blank.

17. Push the Right Direction Key to go to the next menu.

18. Select "Do Not Use" for your Proxy Server settings.

19. Push the Right Direction Key to go to the next menu.

20. Push the Right Direction Key to go to the next menu.

21. Push the X button to save your settings.

22. Do a quick test of the connection to make sure it's working correctly.

23. Launch Wipeout Pure and go to the Download option in the main menu.

24. Select the name of the new connection you just made (ex. WebConnect), connect, and enjoy browsing the internet on your PSP.

Feb 13, 2008 | Sony PlayStation Portable (PSP) Console

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18390 Answers

Mohammed Ebrahim M
Mohammed Ebrahim M

Level 3 Expert

602 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...