Question about RCA 24F512T 24" TV

1 Answer

Mono setting? hi. my grandparents just bought a tv from a friend and it didnt come with the book. they get all chanels but the main one here in our area, the chanel comes on and within a few seconds turns to a blue screen with "mono" written in the top right corner. i just dont know what to do to fix it. i've tried everything i know to do but just dont know what else to do. can you help??

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 398 Answers
Re: Mono setting?

What channel is it and when they tune in that channel, is the picture nice and clear or is it grainy and snowy before the screen goes blue? On some sets, if the signal is weak, the picture will go blue. This is called Blue Screen and is there so you do not see very poor, grainy and snowy pictures. Some sets will have an option in the menu to turn the blue screen off.

Posted on Aug 28, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Tv won't change from chanel to chanel

Do a hard reset to this set and check first. To make it hard reset, unplug the set from AC mains wall socket, and re-plug it back after 10 minutes or so.If this do not help you, check and replace its main system memory IC.

Sep 29, 2012 | Sony FD Trinitron WEGA KV-20FV300 20" TV

1 Answer



Audio and Video Front Inputs are available

for a quick connection of a VCR, to playback

video from a camera or attach a gaming

device. Use the AV button on the remote control

to tune these inputs.

1 Connect the video (yellow) cable

from the Video output on the Camera

(or accessory device) to the Video (yellow)

Input located on the FRONT of

the TV.

2 For Stereo Devices: Connect the audio

cable (red and white) from the Audio

Left and Right Outputs on the Camera

to a Stereo to Mono adapter. Then plug

the single end of the adapter to the

Audio In (white) jack on the FRONT

of the television.

For Mono Devices: Connect one end

of the audio cable from the Audio Out

jack on the device to the Audio In
(white) jack on the FRONT of the television

3 Turn the TV and the accessory device


4 Press the AV button on the remote

control to tune the TV to the side input

jacks. "Front" will appear on the TV


5 Press the PLAY  button on the

accessory device to view playback, or

to access the accessory device (camera,
gaming unit, etc.).

Repeatedly pressing the AV button on the

remote control will toggle the picture source

from the current channel, or Front input


Note: The Audio/Video cables needed for

this connection are not supplied with your

TV. Please contact your dealer or Philips at

800-531-0039 for information about purchasing
the needed cables

Jan 06, 2011 | Philips 20PT633R 20" TV

2 Answers

My tv stuck on mono how to get off mono

On the original TV remote press the "AUDIO" button until it gets to the option "MAIN" and this should get the stereo sound back.

Good luck...

Jan 08, 2010 | iLO IWT3206 TV

1 Answer

How do you change the chanel to AV without remote, dont give the option on the tv buttons

check the website for the remote you have bought and enter the codes for newer models of your make of tv keep trying 1 of them should work but might not give you all functions like teletext

Jun 03, 2009 | Standard (CRT) Televisions

1 Answer

BEKO TRW325 TV. Frozen on chanel 1.

I turned the TV off. I held in all of the (4) buttons on the front of the TV and turned the TV back on again....this seemed to free up the remote control access and I was able to work the TV normally. The four buttons were the channel and the volume controls.

Dec 25, 2008 | Beko 324250WN 28" TV

1 Answer

Dont have a remote

Get a universal remote control. I have used several "One For All" brand remotes and they are very dependable. (Note: Big Lots usually carries some remotes at much better prices.)

Sep 30, 2008 | Toshiba 27A44 27" TV

1 Answer

How do I Program a Telefunken model MR702 tv without a remote

Hi got a Telefunken MR702 from a friend. No remote. How can I set the VCR and TV chanels. On Front panel left is only chanel up and volume comtrol.

Sep 05, 2008 | Standard (CRT) Televisions

1 Answer

** sound! Please help

I'm not sure about 10 seconds but its been unplugged and plugged back in and the darn thing still wont work.
I will try it
Thank you!

Mar 10, 2008 | Philips 27PS55S 27" TV

4 Answers

When i hook up dvd/ps2 i cant get it to show up on the screen

You have to have a remote control to set the chanel to 00. You cannot set the chanel to 00 with the chanel buttons on the front of the tv.

Jan 02, 2008 | RCA F20352SF TV

Not finding what you are looking for?
RCA 24F512T 24" TV Logo

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66451 Answers

John mullen

Level 2 Expert

229 Answers


Level 3 Expert

2963 Answers

Are you a RCA Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides