Question about Sewing Machines

Open Question

Casmate-1 dongle windows 7 driver - Sewing Machines

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 201 Answers

SOURCE: Driver for Hus. 3D

Visit this website:
www.sewmuch4retirement.com
and click on the Tips link. Towards the top (about No.4 I think) you will find detailed instructions on how to get 3D running on Vista and Windows 7. Follow these instructions exactly, and you should get a good result. Most importantly make sure your version of 3D is updated to the latest 7.25 to achieve best results.

Posted on Oct 26, 2010

  • 1564 Answers

SOURCE: How can I get my Pfaff 3d embroidery software to work with windows 7? What do I download for the dongle also?

The only solution I've ever heard of is buying an older machine that has XP....

Posted on Sep 03, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Windows 8 Laptop Computer won't recognize 5D dongle or 4D dongle.


I used this link for the same problem. Download and install. Resolved my problem immediately.
http://sentinelcustomer.safenet-inc.com/DownloadNotice.aspx?dlD=8589947873

Dec 08, 2013 | Husqvarna Viking 1

1 Answer

Cannot activate Dongle H0031


You didn't give much detail but be aware that 3D software will only operate on Windows XP (not Vista or windows 7). It's not a dongle problem - it's a software compatability problem.

Nov 19, 2012 | Husqvarna Viking 1

1 Answer

How can I get my Pfaff 3d embroidery software to work with windows 7? What do I download for the dongle also?


The only solution I've ever heard of is buying an older machine that has XP....

Jul 18, 2012 | PfaFF Sewing Machines

1 Answer

I have 3D Customizing and the newer reader/writer. The dongle works. The reader/writer is not found is what Customizing says. I have Windows 7 - any help will be greatly appreciated. Thank you.


3D will not run properly on a Windows 7 computer.The USB reader/writer will work fine with 5D software.
Trust me, I have tried extensively to get 3D to run on Windows 7. I ran it on Vista, for a while. Then an update to Windows ended that. I've never had it function normally on Windows 7.

Sep 12, 2011 | Husqvarna Viking 1

3 Answers

Have a new computer with windows 7. my old husqvarna viking #1 sewing/embroidery machine software is downloaded, but unusable. Viking says to buy new software costing at minimum $500.00 The message I...


You will have to maintain an XP computer or buy new software there is no fix for your problem.It's the electronic age the old software was written for the XP operating system.When MS changed the operating system Husqvarna Viking had to design new software it's that simple.Don't blame the manufacturer Microsoft made the changes that created the problem. www.sewvac.com

Jan 28, 2011 | Husqvarna Viking 1

1 Answer

Artista embroidery program version 3.0 and Windows 7


For other versions and probably yours...
You'll need the following service packs to use BERNINA Embroidery Software V5 aand under Windows® 7 / Windows Vista™ operating system:
  • Service Pack 2 for BERNINA Embroidery Software V5 (V5.0W)
  • Aurora driver for 64-bit Windows® operating systems
  • Latest dongle driver
  • EConPC 3.1 & ADX 7.14
You'll find them at www.bernina.com\downloads
Hope this helped.
Rick

Jul 04, 2010 | Bernina Artista 180

1 Answer

My laptop which has windows 7 on it does not recognize mmy dongle


there is an update for windows 7 and dongles at the husqvarna viking website.

From Husqvarna Viking website -

When installing the 4D Embroidery System onto Windows 7 computers, the dongle drivers may not initially work correctly, as the 4D Embroidery System installs a set of dongle drivers which were created before Windows 7.
Download and install the latest dongle drivers prior to installing the 4D Embroidery System. Failure to do this, may result in the "Dongle driver not found (E0009)" when you try to open the 4D modules.
Please follow the steps below to install the latest dongle drivers BEFORE installing the 4D Embroidery System
  1. Download and install the latest Dongle Drivers.
  2. Insert your 4D Dongle.
  3. Install your 4D Embroidery System software (and all updates).
  4. Open your 4D Embroidery System software to confirm that your dongle is working correctly.
If you installed the 4D Embroidery System software before installing the latest dongle drivers and if you experience problems such as the error message "Unable to start hasplms service..."; download and install the latest Dongle Drivers.

link to latest Dongle Drivers - http://vsmsoftware.net/downloads/HASP/HASPUsersetup.exe

Husqvarna Viking - http://www.husqvarnaviking.com

If you are still unable to get it to work, visit your local authorized Husqvarna Viking dealer. Most stores have staff who are eager to help but you might want to call for an appointment

Good luck..

Feb 13, 2010 | Husqvarna Designer I

1 Answer

Loaded autodigitizing onto our new computer with Windows 7. Everything loaded just fine but when I try to open program it does not recognize the dongle.


There is an update for dongles and windows 7.

Info on Husqvarna Viking website - http://www.husqvarnaviking.com


When installing the 4D Embroidery System onto Windows 7 computers, the dongle drivers may not initially work correctly, as the 4D Embroidery System installs a set of dongle drivers which were created before Windows 7.
Download and install the latest dongle drivers prior to installing the 4D Embroidery System. Failure to do this, may result in the "Dongle driver not found (E0009)" when you try to open the 4D modules.
Please follow the steps below to install the latest dongle drivers BEFORE installing the 4D Embroidery System
  1. Download and install the latest Dongle Drivers.
  2. Insert your 4D Dongle.
  3. Install your 4D Embroidery System software (and all updates).
  4. Open your 4D Embroidery System software to confirm that your dongle is working correctly.
If you installed the 4D Embroidery System software before installing the latest dongle drivers and if you experience problems such as the error message "Unable to start hasplms service..."; download and install the latest Dongle Drivers.

Link to dongle drivers - http://www.vsmsoftware.net/downloads/HASP/haspusersetup.exe

Good luck.

Feb 09, 2010 | Husqvarna Designer I

1 Answer

I have the Husq Pro software for my #1+ machine and I bought a new computer with 64 bit. I can't get it installed. What do I do?


Info on Husqvarna Viking website - http://www.husqvarnaviking.com

When installing the 4D Embroidery System onto Windows 7 computers, the dongle drivers may not initially work correctly, as the 4D Embroidery System installs a set of dongle drivers which were created before Windows 7.
Download and install the latest dongle drivers prior to installing the 4D Embroidery System. Failure to do this, may result in the "Dongle driver not found (E0009)" when you try to open the 4D modules.
Please follow the steps below to install the latest dongle drivers BEFORE installing the 4D Embroidery System
  1. Download and install the latest Dongle Drivers.
  2. Insert your 4D Dongle.
  3. Install your 4D Embroidery System software (and all updates).
  4. Open your 4D Embroidery System software to confirm that your dongle is working correctly.
If you installed the 4D Embroidery System software before installing the latest dongle drivers and if you experience problems such as the error message "Unable to start hasplms service..."; download and install the latest Dongle Drivers.

Link to dongle drivers - http://www.vsmsoftware.net/downloads/HASP/haspusersetup.exe

Good luck.

Jan 23, 2010 | Husqvarna Viking 1

2 Answers

I need a driver for a husquvarna 3D reader/writer card, where can I find one


Info on Husqvarna Viking website - http://www.husqvarnaviking.com

When installing the 4D Embroidery System onto Windows 7 computers, the dongle drivers may not initially work correctly, as the 4D Embroidery System installs a set of dongle drivers which were created before Windows 7.
Download and install the latest dongle drivers prior to installing the 4D Embroidery System. Failure to do this, may result in the "Dongle driver not found (E0009)" when you try to open the 4D modules.
Please follow the steps below to install the latest dongle drivers BEFORE installing the 4D Embroidery System
  1. Download and install the latest Dongle Drivers.
  2. Insert your 4D Dongle.
  3. Install your 4D Embroidery System software (and all updates).
  4. Open your 4D Embroidery System software to confirm that your dongle is working correctly.
If you installed the 4D Embroidery System software before installing the latest dongle drivers and if you experience problems such as the error message "Unable to start hasplms service..."; download and install the latest Dongle Drivers.

Link to dongle drivers - http://www.vsmsoftware.net/downloads/HASP/haspusersetup.exe

Dongle issues - http://www.husqvarnaviking.com/global/8588_4197.htm

Good luck.

Dec 10, 2009 | Husqvarna Viking 1

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

Chris Wetmore

Level 2 Expert

185 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Are you a Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...