Less than 3 years old and this machine is run maybe once a week. The problem is that it isn't really getting things clean. More to the point all of the dishes and glasses have dirty streaks and residual dishwashing detergent stains all over them, so I know for sure that it isn't rinsing correctly or thoroughly. How can I solve this problem or do I need to have repair person look at it? I live in NYC and installed the unit myself when renovating our kitchen so I can pretty much repair anything myself unless it's a parts replacement issue. Please advise.Thanks,
Vince
The problem for the spots is hard water.There is a new product out at www.dishwasherfilter.com that solves this problem once and for all.It is a small filter that goes under the sink and filters out the hard minerals that cause these spots from the water before they enter the dishwasher.It is very affordable (like 70 bucks) and even has a money back guarantee.After just one load you will be amazed how your dishes look.
Th ete first thing to do is put a pack of limonade unsweetened through a wash, it will clean any hardness minerals. Next be sure the heat element is working properly, then consider replacing the pump/motor assembly, fairly easy you can prts online.
Comments:
Mar 29, 2009
- Th ete first thing to do is put a pack of limonade unsweetened through a wash, it will clean any hardness minerals. Next be sure the heat element is working properly, then consider replacing the pump/motor assembly, fairly easy you can prts online.
Was this helpful?
Yes
No
Popular Solutions for GE 24 in. Monogram ZBD6880KSS
GE Monogram dishwasher, doesn't seem to be getting any water. It's hooked up to the water supply....
(More)
GE Monogram dishwasher, doesn't seem to be getting any water. It's hooked up to the water supply. How can I tell if the pump is shot?
My GE Monogram dishwasher is not releasing the detergent during the washing cycle. The dispenser is...
(More)
My GE Monogram dishwasher is not releasing the detergent during the washing cycle. The dispenser is open, but the soap is still in it. How do I fix this or do I need a repair person?