Question about Honda HRX217VKA Lawnmower

Open Question

Smart drive cable on a honda hrr lawnmower

I took the "smart drive" paddles apart and now I can't seem to get it back together and working. Is there a secret way to reassemble this crazy thing?

Posted by Anonymous on


3 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: drive wheels on my honda hrr 216 wont free wheel

Take the rear wheels off and clean parts 2 to 7
You may need to replace 5,6,7

Posted on Apr 03, 2011

  • 2 Answers

SOURCE: I have a Honda engine in my push moser. I can get

Thr air mixture needs to be adjusted. Turn screw in all the way then back off one and a half turns

Posted on May 13, 2012

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

I have a Honda self propelled lawnmower want run unless u manually put gas in does this mean I have to rebuild it

Remove the bowl by removing one bolt from directly underneath it. The bowl is a silver metal cylinder shaped piece.
After removal, you will see a small almost pin sized hole. It is probley clogged up. Take a needle, small nail, anything that you can insert into the hole to clean out. Also blow through the hole.
You may need to repeat this a couple times but it will work!

Sep 04, 2014 | Garden

1 Answer

How can I get blueprints to put back together a 2007 Troybuilt Pony riding lawnmower? It needed several parts. They've all been purchased and replaced, however, putting the thing back together is like...

Can you get model, serial and year? There should be a tag or plate near or under the seat with this info. I should be able to get diagrams for you.

Sep 04, 2013 | Garden

1 Answer

Took washer apart, put it back together and now it won't start

ok... seems that it is trying to fill but wont...first...for all problems after dis-assembly of anything...I always recheck all wire connections...yould be amazed how a wire can be pulled off and you not notice they are all ensure your water supply is turned back on at the faucet....try unplugging the unit from the wall, waiting 5-6 mins and plug it back see if the controls reset..phillip

Jul 04, 2012 | Bosch Nexxt Premium WFMC6400UC Front Load...

1 Answer

I took my desktop apart and put it back together and now it won turn on

Open it back up and check to make sure you didn't accidentally pull one of the cables out.

Jun 30, 2012 | Dell Computers & Internet

1 Answer

Need pamphlet for Briggs,Stratton Eastern Lawnmower 2007 Took lawnmower apart, cannot find book on how to put it back together.

You must have model numbers to get any real help. If you mean you took the motor apart, you could go to and download a manual.

Find your model number on your motor and enter on web site.

Aug 10, 2010 | Briggs & Stratton Lawn-Boy Insight Series...

1 Answer

I took my lawnmower engine apart and now need a schematic to put it bak together Honda HR173

i would suggest if you tore it down and dont know how to replace it all buy the book on it so you do everything correctly.every engine has a how to book.check with local lawn and garden dealers.

Sep 26, 2009 | Garden

2 Answers

Cbr 600

have u made sure the floats have not got stuck

Aug 02, 2009 | 1998 Honda CBR 600 F(3)W

1 Answer

Circular clip holding paddle axle in place

I fixed this by using an "e-clip". You can get e-clips at any autoparts store, or online in assortment kits for cheap money. You have to remove the spring seal and washers inside the pan, you also have to remove the circlip on the bottom of the paddle shaft, you have to install the paddle from the inside once you have the right size e-clip installed.

It's a lot harder to explain than to do, once you get it apart you'll see how things go together. I have no clue what originally used to hold the shaft in, mine made sqealing noise, when I took it apart there was little left of the original part.

Aug 04, 2008 | Breadman TR2200C Ultimate Bread Maker

1 Answer

Oster 5821 breadmaker

I had a paddle freeze on me too I took apart the lower end and lubricated it then put it back together

Sep 03, 2007 | Oster 5838 ExpressBake Bread Maker

Not finding what you are looking for?
Honda HRX217VKA Lawnmower Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Garden Experts

John Trevino

Level 3 Expert

1388 Answers


Level 3 Expert

2527 Answers


Level 3 Expert

78267 Answers

Are you a Honda Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides