Question about Televison & Video
I NEED THE ROMOTE CONTROL CODE FOR AN ELEMENT FLX-1910 TV TO USE WITH THE CISCO DIGITAL TRANSPORT ADAPTER HDA-IR2 REMOTE CONTROL
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Here is a list of remote codes for Emerson TV: 004 009 014 023 024 025 026 027 030 032 033 034 035 036 037 038 039 040 041 042 043 045 046 049 053 116 135 147 177 179
Give them each a try (a pain I know) and please rate me if they work!
Posted on May 06, 2008
Problem: When the TV is turned on a picture appears for a few seconds and then the picture turns off. Audio is still heard.
Solution: Not a simple fix! This TV has 4 small florescent looking bulbs that act like a back light to light the image on the liquid crystal display (LCD). At least one of these bulbs is burned out or broken. The wires powering the broken bulb need to be cut and spiced together. Basically you’re bypassing the bulb and completing the circuit when cutting the wires going to the bulb on each end and splicing them together.
WARNING: This worked for me but no guarantee for anyone who tries it. This is a very involved procedure and involves completely dismantling your television. To be honest I don’t recommend anyone trying to fix it unless you are very technically minded and have a couple of hours to waste carefully tearing apart your TV. If anyone is willing to attempt this repair I am willing answer questions.
Cause of problem: It is my guess that this problem occurs when the TV is left on for extended periods of time. Like leaving the TV on when you fall asleep at night. My TV was left on a lot. I noticed that the plastic was melted and discolored where the bulb had burned out. (This can only be seen internally and is no way visible from the exterior)
Posted on Feb 14, 2009
On the bottom of the Element FLX-1910 there are 4 tabs located on the bottom side of the base. With the help of another person, please slide all 4 tabs in an inward direction. This will release the tension between the base and the stand. Slide the base over the tabs and remove the base from the stand.
Posted on May 30, 2009
Tips for a great answer:
Jun 11, 2015 | Element Electronics FLX-1910 19 in. LCD...
Oct 18, 2014 | Cisco CIAC-PAME-1125-K9 Remote Access...
Jul 27, 2014 | Element Electronics FLX-1910 19 in. LCD...
Apr 24, 2013 | Element Electronics FLX-1910 19 in. LCD...
Jan 02, 2013 | Televison & Video
May 19, 2011 | Element Electronics FLX-1910 19 in. LCD...
Jul 30, 2010 | Element Electronics FLX-1910 19 in. LCD...
May 13, 2010 | Element Electronics FLX-1910 19 in. LCD...
Apr 12, 2009 | Element Electronics FLX-1910 19 in. LCD...
104 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: