Question about Samsung HL-R6167W 61" HDTV
While watching TV the set automatically shut itself off. Went to turn it back on with the remote with no luck. Went to the TV and tried to power it on from the front panel and got the same result. No Power and No Lights at flashing or on at all. Unplugged the power cord from the TV and wall out let for 5-10 minutes to possibly "Reset" the TV. Still Nothing!!! Anyone come across this situation? Any suggestions appreciated. Changed Lamp and Color Wheel a few times with the Last Lamp change approx. 4-6 months ago. I don't believe that this would be the problem with the experience from the past at least I would get the 3 lights flashing on the front. Thanks
Power supply board is faulty need to check the power transistors and fuses u will need a tech to solve this
Posted on Jul 14, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Go to Samsung.com for solution. There is a switch that just needs to be repositioned behind access door on rear. Fixed my HL-S5086W ok.
Posted on Dec 14, 2008
SOURCE: TV shuts itself off
Something is overheating or you've got leaking capacitors somewhere. I'd start with the ballast board. Its directly underneath the lamp housing. You can access and remove it through the lamp door. Replace that and if that doesn't solve the problem, comment again, and we'll move on to more complicated repairs. You haven't noticed any weird noises, humming, screeching or similar oddities from the set? Turn the set on with the lamp door open and bypass the switch with a piece of tape, if you hear something like a hum, you may have a bad color wheel motor.
Posted on Mar 23, 2009
If the lamp has been replaced I would think the Lamp ballast would be most likliest followed by the color wheel and then the Digital board. You can get any part needed for your model at www.tvrepairworld.com just leave them a email they respond quickly.
Posted on Aug 28, 2009
Your lamp burst. This model uses a lamp housing which does not have a filter screen on it. When the lamp bursts, hot pieces of glass and mercury (very toxic) drop straight down into the cooling fan below it. Although FixYa.com (implies I'm suppose to tell you how to fix it) I am going to tell you to call a servicer and have them clean that mess out of there. It's a health issue, I don't want someone unknowingly exposed to mercury on my watch. Let the servicer know what he is getting into. I hope this helps.
Posted on Mar 18, 2010
Tips for a great answer:
Dec 25, 2015 | Televison & Video
Sep 27, 2012 | Televison & Video
B+ over current protection (OCP), unit goes to the standby mode then displays the 2 blink fault. Could be a short in the power supply of any of the circuits.
Mar 16, 2011 | Sony Televison & Video
Sep 13, 2009 | JVC AV-27920 27" TV
Mar 27, 2009 | Televison & Video
Jun 13, 2008 | Hitachi UltraVision CineForm 55VG825 55"...
Oct 07, 2007 | RCA 32V524T TV
Nov 05, 2005 | Panasonic PT-56TW53 56" Rear Projection...
101 people viewed this question
Usually answered in minutes!