Error code

E1 00
Content
IMC PWB communication trouble

Detail
An abnormality occurs in communication
between the MCU PWB and the IMC PWB.

Cause
IMC PWB-MCU PWB harness abnormality
MCU PWB connector disconnection
IMC PWB ROM defect/data abnormality

Check and remedy
Check connection of the connector and the
harness between the IMC PWB and the MCU
PWB. Check the ROM of the IMC PWB.


Perform the following procedure to enter the simulation mode.
"#" key - Interrupt key - "C" key Interrupt key
14 - Start key - 1 - Start key

Press the C key until copier restarts and code should clear.

Reset by going into service mode and clear trouble

fuser has oevr heated - needs resestting or replacing