Question about Ingersoll Rand Stationary Air Cooled Rotary Screw Compressor 10 Hp, 35 Cfm At 125 Psi, Model# Ep

Open Question

OFFLINE pressure setting on Ingresoll rand compressor

I have R90-110I ingressol rand compressor with inteliisys E66268 controller. We installed new controller and we are not able to increase OFFLINE setting above 110psi. How to access factory settings to change rated pressure on this controller?

Posted by Anonymous on

3 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: I have an ingersoll rand ssr-ep60 with intellisys

There have a hidden button to turn on to do setting

Posted on Mar 31, 2010

  • 40 Answers

SOURCE: I have SSR compressors 50

Goto factory setting change design pressure setting of the unit.

Posted on Aug 22, 2012

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

For the SG intellisys controller, how do you change the online pressure setting?

Goto Main Menu, Operator Setpoint select, Offline/Online. Up/down key to change value.

Jul 08, 2012 | Ingersoll Rand Stationary Air Cooled...

2 Answers

I'm working on a Ingersoll rand 100HP stationary compressor with an intellisys 39875158 controller.

Make sure the model of your compressor is design for 160psi if not the main motor trip off and safe valve pop. Goto Main Menu, Operator setpoint+select, Offline/Online+select, arrow up and down to change value.

Jul 04, 2012 | Ingersoll Rand Stationary Air Cooled...

2 Answers

Ingersoll Rand SSR EP60 60hp Compressor w/ Intellisys 39817655 controller. Need to reset target pressure. What is the secret button sequence to access programming mode on this controller? I am aware of...

OK, Compressor should be shut down and showing (ready to start) in display. Press load/unload button once then press hidden right button within 3 seconds. This will let you access the set point program. It will include language, temperature and pressure, rated pressure,etc. Make sure you look at the data tag affixed to the unit and see what the rated pressure is for your unit. You can endanger yourself and equipment by over pressurizing the components of the compressor.

May 19, 2011 | Ingersoll Rand Stationary Air Cooled...

1 Answer

I have an Ingersol Rand SSR-EP40SE Rotary screw Air compresor. We ordered a new control panel for the unit because the old panel had a burnt resisitor. The new panel was installed and wont start the unit...

First you need to program the controller. Controllers do not come programed for a specific compressor. You will need to enter factory set point and and set all parameters. Horse power, pressure, DOL start or wye delta start etc. The new controller is probably set incorrectly. Look at factory set points on the old controller and copy all the parameters and then set the new controller to those set points.

Sep 06, 2010 | Ingersoll Rand Stationary Air Cooled...

1 Answer

I have an ssr-epe250 and need to change the pressure setting from online @93 & offline @ 103 psi. i need 125 psi. i just changed the controller and cannot get back to operating specs i need.

controllers do not come setup for a specific compressor. you need to be able to get into the factory will then be able to change rated pressure, horsepower etc. look at the name plate to get rated pressure. once the rated pressure has been changed you will be able to set your operating pressure to 125 online and 115 or less offline

Aug 10, 2010 | Ingersoll Rand Stationary Air Cooled...

Not finding what you are looking for?
Ingersoll Rand Stationary Air Cooled Rotary Screw Compressor 10 Hp, 35 Cfm At 125 Psi, Model# Ep Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ingersoll Rand Tools & Hardware - Others Experts


Level 2 Expert

205 Answers

Phil Walker
Phil Walker

Level 3 Expert

605 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you an Ingersoll Rand Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides