Question about Vacuums
When you take it apart, check the end play and lateral travel of the shaft in the motor that the fan connects to.
Posted on Jul 14, 2013
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There should be a belt tensioner for the V belt, maybe it is not contacting the belt when you tilt the handle back. If this is less then 1 year old, then it is under warranty, take it in to a warranty servicer for warranty repair.
Posted on Dec 29, 2008
Check if there is something stuck in the the suction tube, telescopic wand or in any of the parts involved. I had the same problem due to a number of chocolate wrappers stuck in the wand. I almost went and bought another one, luckily i had the sense to ask the salesman at sears the same question and he put me on the right path. The suction tube and wand are detachable from the unit, so you should be able to unplug the parts and check. This is the same solution if you motor is running fine but you have lost suction and\or bag shows full when it is not. Hope i am saving someone some money by stating the obvious here, just the way the sears salesman helped me.
Posted on Dec 28, 2009
I have actually written an in depth trouble shooting guide on how to find the clog in your Sebo. Since this light is coming on only when you have the wand inserted into the vacuum and are vacuuming the floor, this indicates that your clog is in the bottom of the machine. The link below will explain exactly what you need to do to locate, and clear this clog.
This should be the exact fix your vacuum needs:
Posted on Jun 17, 2010
SOURCE: My Oreck XL vacuum does
Turn the machine on and be sure the bag expands quickly and fully like a balloon. If the bag does not fill with air, or is soft, there is probably an obstruction inside the handle tube or fan housing. Disassemble the handle to check for blockage, or remove the bottom plate to check the inlet to the motor fan.
Posted on Jan 19, 2011
Tips for a great answer:
Apr 06, 2014 | Electrolux Eureka Sanitaire SC679J Light...
on Jun 04, 2014 | Dyson Bagless Upright Vacuum DC41 Animal
Jan 04, 2014 | Sanitaire SC9180B Commercial DuraLux...
May 02, 2013 | Dyson Vacuums
Apr 06, 2012 | Dyson DC25 Bagless Upright Vacuum
A few weeks ago I ran into the same problem, virtually no suction. First I replaced the bad belt (make sure you fit it right or it'll destroy the belt, luckily I bought 2!) and while the vacuum sounded more "alive" it didn't seem to pick up anything any better. The final solution was taking apart the entire intake port section down to the motor and getting the collection tube. It was filled with junk all the way up. I spent over an hour clearing out gunk and animal fur throughout the tubing. Putting it back together was a cinche because the entire vacuum uses one screw type universally. The whole process was pretty intuitive and its clear it's meant to be taken apart for just this purpose.
May 18, 2010 | Dirt Devil M084600 Dynamite Bagless...
Nov 03, 2009 | Eureka Sanitaire Commercial SC4580 Upright...
Jul 17, 2009 | Eureka Sanitaire Commercial SC785 Bagged...
May 26, 2018 | Dyson Vacuums
May 26, 2018 | Vacuums
60 people viewed this question
Usually answered in minutes!