Question about Washing Machines

2 Answers

Zanussi JetSystem TurboDry JD12191 - HELP!!

11 month old system - filled with water - stopped! Light flashing for start, press start, two clicks, nothing happens... tried switching off, no joy. No manual so don't know if there is a "reset". Please help!

Posted by on

2 Answers

Re: Zanussi JetSystem TurboDry JD12191 - HELP!!

Drain the tube at the bottom right of the machine behind the panel and unscrew the knob and there should be lint and stuff in there to take out. do you know if this machine has a lint filter? I don't see one???

Posted on Feb 09, 2008

Re: Zanussi JetSystem TurboDry JD12191 - HELP!!

Just 11 month! Do not try to fix it, jet. You have 10 days warranty left. I hope you have your buy ticket/invoice/recipe call service center as soon as possible! In case your warranty expired, there are many probable causes of the failure. You need to give a more detailed description of the problem. It is probable that you can find the user manual in the manufacturers webpage. Or google "your model"+manual Good Luck!

Posted on Sep 16, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Zanussi jetsystem turbodry 1600 wjs1665 w is not heating the water

More than likely the heater element has failed.
This is located at the rear of the washer drum.
It means removing the rear half of the cabinet to access it.

Mar 29, 2010 | Zanussi ZWF1430W Front Load Washer

1 Answer

The drier won't heat up and it flashes up a number (I'll check tonight again what the number is). it washes fine but won't dry. It is a Zanussi Jetsystem Turbodry 1200.


Have you fixed the problem yet? And if yes, how??
I have the same washing machine with the same problem. So I hope you can help me!

Best regards,

Nourah van Leeuwen

Jul 22, 2009 | Washing Machines

1 Answer

Zanussi jetsystem turbodry 1200 door wont open

its the doorcatch,turn power off, remove lid and put hand in machine where doorlock is situated feel about and try open catch, repair or replace?

Jun 24, 2009 | Zanussi ZWF1420W Front Load Washer

1 Answer



Please download asap - as it is stored on my personal FTP site, and will be removed in 48 hours.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Jan 16, 2009 | Washing Machines

1 Answer

Zanusssi jetsystem turbodry 1200

clean out filter, door bottom right, unscrew filter and clean it

Aug 02, 2008 | Zanussi IZ161S Front Load Washer

2 Answers

Zanussi WJS 1397W

possibly a foreign object in pump.
tilt backwards at a good angle and remove pump. i find the easiest way to do this is to undo the 3 screws round the periphery of the pump

Jul 11, 2008 | Zanussi WJS1265W Front Load Washer/Dryer

2 Answers

Zanussi jetsystem Turbodry 1200

replace the circuit board

Feb 19, 2008 | Washing Machines

4 Answers

Zanussi jetsystem Turbodry 1200

It appears that you may have a faulty door interlock or a faulty PCB. pcb is not really a DIY job as some boards require proramming on certain versions. Regards Advisor

Oct 30, 2006 | Zanussi FJS1225W Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

166 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides