Question about HP nx9110 Notebook

2 Answers

HP nx9110 low battery alarms

Hi, I need to set the low battery alarm for my note book. It slider does not come below 40% I need to set low battery alarm at 10%. but it does not come below 40%. Its same for low battery alarm and critical battery alarm.

Posted by on

  • 3 more comments 
  • babakhan Aug 27, 2007

    I have checked there is no option in BIOS which can be related to power management.

  • babakhan Aug 27, 2007

    Yeh there is no such option where I can change such power management related settings. I have these features only in windows.

  • babakhan Aug 27, 2007

    there is only one method you know Control Panel > Power Options then under Alarm Tab you can change these settings .. but in my case when I need to change the low battery alarm and move the slider to 10% and as I leave my mouse button it again jumped to 40%. i have tried many times it is sticky to 40%.

  • babakhan Aug 27, 2007

    I am not getting your point, please let me know that is there any solution to this problem ?

    I will be very thank full to you.

  • babakhan Aug 28, 2007

    Yeh I removed the battery and tried to set up the alarms, bu the same was the case when laptop was on direct power supply and battery was not there.

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 60 Answers

Hi there hopefully this is slightly more useful to you. Being a HP its possible that the laptop has built in HP Power management software that overules the windows power management. Try looking in the control panel for it, if not maybe the utility is in Start- All Programs

Posted on Aug 28, 2007

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 32 Answers

Have you gone to control panel page? energy management systems? if there you cannot change maybe you also can change it on bios because some laptops also have this options in bios

Posted on Aug 27, 2007

  • 1 more comment 
  • Sergio  Silva
    Sergio Silva Aug 27, 2007

    and in control panel also cannot change?

  • Sergio  Silva
    Sergio Silva Aug 27, 2007

    and your batery if goes at 40% still wang up how much time more? and if you try to chanhe settings without batery on would also goes to 40%?

  • Sergio  Silva
    Sergio Silva Aug 27, 2007

    im asking if you try to set up alarms with laptop just on plug without batery on it. maybe you can try it

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I put in a new battery but my Harley still won't start


Hi Marlys, I would try a factory reset for your security alarm for more information on your question please visit the websites below and good luck: Set Change Override Transport Harley Security Alarm PIN Code No Key Fob...

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Jul 13, 2014 | 2002 Harley Davidson FXDL Dyna Low Rider

1 Answer

How do I set alarm? Instructions long gone


To the left of the display are two buttons, engraved "1" and "2". (Note, I'm NOT referring to the buttons for radio presets, which are below.)

Hold either of these buttons for a second or two to enter alarm set mode. The screen prompts will prompt you to set the time for the alarm to go off using the time set buttons to the right of the display. You can also press one of the radio preset buttons or the AUX or CD buttons to wake to one of those. Once you're done setting the alarm, quick presses of these alarm buttons turn the alarm on and off and choose between music and beeper.

As a side note, if you've installed the backup battery and the power fails during the night, the alarm will still go off with the beeper so you're not late for work -- a thoughtful touch from Cambridge Soundworks.

May 22, 2014 | Cambridge Soundworks CD-740 Clock Radio

1 Answer

2003 harley davidson dyna low rider alarm reset


Hi Anonymous, for more information about your question please visit the website below. Good luck and have nice day.
Set Change Override Transport Harley Security Alarm PIN Code No Key Fob...

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Dec 23, 2012 | 2003 Harley Davidson FXDL Dyna Low Rider

1 Answer

I have ajanta quartz wall clock model odc120. Its not running in time. Kindly let me know how to adjust the time on this clock


First change the batteries.
Then on the back panel you will see a lot of buttons. Push the slider button from normal to time. Then after pressing the mode button you can sequentially change the time date etc. Same way for setting up alarm...push the slider to alarm and set. After you have finished put slider switch to normal.

Sep 28, 2012 | Home

1 Answer

Disarm the alarm


Hi Michele, for more information about your question please visit the websites below. Good luck and have nice day.
Set Change Override Transport Harley Security Alarm PIN Code No Key Fob...

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Apr 25, 2012 | 2006 Harley Davidson FLSTI Heritage...

1 Answer

I need instructions for my timex clock


Hello
Here are the instructions for your clock-radio.

Installation

1* Remove unit and all packing materials from the carton. You should save packing

materials in case unit needs to be returned for service. If you do not wish to save the

materials, please dispose of them properly.

2* Place the unit on a stable, level surface, close to an AC outlet, out of direct sunlight,

and away from sources of dust, dirt, heat, water, moisture, vibration, or magnetic fields.

3* After installing the batteries (see below) and reading the Maintenance notes, plug the

AC cord into an outlet.

"Sure Alarm" Battery Backup Installation

It is strongly recommended that 2 "AA" batteries be installed into the unit, as directed below,

in order to activate this product's "Sure Alarm" Battery Backup feature. (The model should

come with two batteries already installed.) In the event that the AC power cord is disconnected

or a power failure or other interruption occurs, the "Sure Alarm" Battery Backup will maintain

clock and alarm settings for the life of the battery, ensuring that the alarm (buzzer only) will

sound at the set time. During any interruptions the time and alarm settings will be saved

and automatically restored when AC power is again active.

1* Gently turn the unit over and remove the battery

compartment door.

2. Install 2 "AA" batteries (alkaline is recommended for

longer life), while making sure that the + and - ends

match up with those inside the battery compartment.

3* Slide the battery compartment door back on, making

sure the door locks into place, and gently return the
unit to its upright position.

Aug 19, 2011 | Timex Auto-Set Dual Alarm Digital Clock...

1 Answer

How to disable alarm system. The alarm went off


okay, this alarm reset is done by turning the key on and pushing the reset button a few times, you will need to try this a few times to get the correct number of pushes,for example turn key on and quickly push 3 times and if that doesnt work retrey it and push it 4 times, take note that every time you try you need to turn key off and then on again before you push reset button,i know it can be set to 1- 2 -3 or 4 pushes to reset, this is programed at the time of install, most installer dont set it or tell you so you will need to try all four. good day.

Apr 15, 2011 | 1996 Nissan Pathfinder

1 Answer

How to adjust time, date and alarm


hi please specify ur brand name and model number of ur vacuum cleaner for a normal vacuum cleaner u can see a slider on the top slide the slider to the time and select the minute button and hours button to set the time and for setting the date slide the slider to the date and set the date using minutes button and for setting the alarm slide the slider to the alarm section and set the alarm on to off the alarm there are two options u can either press the snooze button which will stop the alarm for 5 minutes and after that it will ring ring again to permanently switch off ur alarm slide the slider to alarm off tab and press ok was this useful to u pls vote for me if u liked it
with warm regards - bonefirediv

Mar 25, 2011 | Vacuums

1 Answer

Pc is telling me to plud it in when the battery is at 90%


Your power settings may be set up to inform you at 90% the battery is getting low.

Windows XP
Go to control panel, Performance and Maintaince(only in catigory view), Power Settings click Alarms tab and adjust the sliders to the desired.

Windows Vista
Go to control panel, click change battery settings, find the option selected click the link below it saying Change Plan Settings, click the link change advanced power settings, go to the battery section and adjust the low battery level and critical level.

Dec 07, 2008 | Acer Aspire 3680 Laptop

Not finding what you are looking for?
HP nx9110 Notebook Logo

Related Topics:

284 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

pontelemon
pontelemon

Level 3 Expert

538 Answers

Alun Cox

Level 3 Expert

2678 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...